Tender For Electrical Works Of The Engineering Workshop At Tulmulla Campus Ganderbal; 1 Wiring for Light point/fan point/exhaust fan point//call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required 2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire. 4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 10 sq. mm + 1 X 6 sq. mm earth wire) 5 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB) :12 way, Double door 6 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single Pole) 7 Supplying and fixing 32 A rating, 240V 10 kA, “C” curve, Doublepole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 8 Supply and installation of following cable size of perforatedpainted with powder coating M.S cable trayswith perforation not more than 17.5% in convienent sections joined with connectors , suspended from the ceiling with MS Suspenders including bolts and nuts painting suspenders etc as required(150mmx50mmx1.6mm) 9 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2megaohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc.complete as required. 10 Supply,installation and testing of Electrical SS Combine PVC type 16 Amp switch and socket. Complete job 11 Supply ,Installation,Testing commissioningof 120-150 watt High Bay LED Luminarewith rated voltage of single phase 230 Volts , Frequency 50 HZ, +- 2 Hz , operating input voltage range of 150-250 V, colour temperature of 5500-6500K, LED Life 50000Hrs , degree of protection IP-66, shape of Luminare round , mounting type metallic adjustable brackets with eye bolt. The lamp housing shall be pressur die cast metal alloy heat sink along with sufficient heat sink fins to dissipate heat effectively. The lamp material should be heat resistant toughened glass. The Luminious intensity shall be 12000 - 150000lumens 12 Supply installation testing and commisssioning of industrial Exhaust fan of 600 mm dia, 3000CFM, 1400 RPM, IP Rating IP-55, low Noise of 60-65 db Acsingle phase 160-240 Volts. 13 SITC ofMain Panel fully compartmentized cubical type steel clad floor mounted Cabinet busbar door hinges etc complete job as per follows INCOMMER FROM MAINS 630 AMCCB 4PTHERMALRELEASE, 36KA, 415V (1 no) EXTENDED ROTARTY OPERATING HANDLE(1 no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (1 no) Add On Block ON/OFF/TRIP (03 no) ON OFF INDICATING LAMPS 220V AC LED TYPE SET (3 no) 600/5A, 15VA CL-1.0, CURRENT TRANSFORMER - RESIN CAST/ENCAPSULATED (3no) VAF METER(1no) PHASE INDICATING LAMPS R-Y-B 220V AC - LED TYPE (SET) (3no)C.T. SHORTING LINK (3no)06A SP10 KAMCB FOR CONTROL C CURVE (03no) OUTGOING FEEDER MCCB 200A 4P THERMAL RELEASE, 415 V- 36KA(2no)ROTARY OPERATING HANDLE (2no)SPREADER LINKS & PH. BARRIERS (SET OF 8) (2no) Add On Block ON/OFF/TRIP (03no)ON OFF INDICATING LAMPS220 V AC - led type (SET) (03 no) OUTGOING FEEDER MCCB 125A 3P THERMAL RELEASE,415V - 25KA (11no)ROTARY OPERATING HANDLE (11no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (11 no) ADD ON BLOCK ON/OFF/TRIP (03no) ON-OFF INDICATING LAMPS 220VAC-LED TYPE (SET) (03no)BUS BAR 800 A TPN ALUMINIUM BUS BARS ELECTROLTIC GRADE E-91E (80X10MM OR EQUV) (1no) 14 SITC of 100 AMP DISTRIBUTION BOARDINCOMMERFEEDER 100 A MCCB 4-P MP RELEASE415V-36KA (1no) EXTENDED ROTARY OPERATING HANDLE(1 no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (1 no) Add On Block ON/OFF/TRIP (03 no) ON OFF INDICATING LAMPS 220V AC LED TYPE SET (3 no) 100/5A, 15VA CL-1.0, CURRENT TRANSFORMER - RESIN CAST/ENCAPSULATED (3no) VAF METER(1no) PHASE INDICATING LAMPS R-Y-B 220V AC - LED TYPE (SET) (3no)C.T. SHORTING LINK (3no)06A SP10 KAMCB FOR CONTROL C CURVE (03no) OUTGOING FEEDER MCB 63A TPN 10KA (3no)TERMINAL 63 A(3no) MCB 32 A TPN 10KA (3no)TERMINAL 32A(3no)BUS BAR 150A TPN ALUMINIUM BUS BARS ELECTROLTIC GRADE E-91E (20X8MM OR EQUV)(1no) 15 Supply installation testing and commissioning of Chemical earthing with 03 meters Galvanized electrode etc as required 16 Providing and fixing of 10 sqmm copper wire for earthing the pit 17 Providing and fixing of Heat Shrinkable multi Coloured sleeves and cable end terminations suitable for 630/240 Sq mm 18 Supply installation testing and commissioining of 3.5 core aluminium armored cable xlpe pvc of voltage grade of 1.1 KV(3.5 core 240sqmm) 19 Supply installation testing and commissioining of 3.5 core aluminium armored cable xlpe pvc of voltage grade of 1.1 KV(25 sqmm) 20 Supply, Transportation, Erection, testing and commissioningincluding loading, unloading and carriage upto 50 mtr, as per REC standards 9 mtr ST Pole ST-410 SP33 21 Dismentalling of existing 11/9 mtr Steel Tubular pole including loading unloading and manual carriage upto 100 meters as per REC standardand re-erection of the same including the cement bottoming 22 Providing and laying of Cement Bottoming of ST Poles with 1:2:4 Mix including material and carriage 0.48 Cums for 9 Mtr pole 23 Providing & Fixing of PG/ T Clapms for200 mm Sq AAA Conductor 24 Providing & fixing of Danger Plates with Clamps 25 Providing & fixing of Anti Climbing Device with Clamps 26 Providing & fixing ofEarthing Complete with GI Pipe 40 mm or GI Rod 20mm2.5 mtr long threough GI Strip 27 Providing and painting of 9 Mtr ST poles with two coats of red oxide and two coats of aluminium paint 28 Providing and fixing of Heat Shrinkable multi Coloured sleeves and cable end terminations suitable for 240 Sq mm 29 Supply, Installation, Testing and Commissioning of clamps/collers with required insulators for holding 240 sqmm cable on ST poles.
