|
| 1 | 1_Construction of Approach Road from Hudukhata Naosali Road to Gergeria Seuni Village under SOPD-G for the year 2025-26Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (a) In area of non thorny jungle |
| 2 | Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5. |
| 3 | Construction of subgrade and earthen shoulderwith approved meterial obtained from borrow oit with all lift and leads , transporting to site ,soreading gradding to required slope and compacted to meet requirement of table 300-2 including cost of testing of materials at site and laboratory as directed by the deptt. |
| 4 | By Mix in place Methd(Construction of granular sub-base by providing close graded material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achive the desired density coplete as per cl.401 (with an initial lead of 5.00Km) (including cost of testing of materials at site and labortory as directed by deptt.) |
| 5 | Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber,applying and brooming requisite type of screeninig/binding material to fillup the interstices of coarse aggregate, watering and compacting to reqd. density(with an initial lead of 5.00km) By mechanical means Grading-III(Using Screening type-B)(11.2mm aggregates) |
| 6 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage.(a) including Edge block/Edge restraints |
| 7 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(V) 800 mm x 600 mmrectangular |
| 8 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(iii) 60cm circular |
| 9 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(ii) 60cm equilateral traingle |
| 10 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 11 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications(80% of the length is considered) |
| 12 | Supplying, filling and laying in loose with Geo-textile bags of Type-A (1.30m x 0.70m) made of Geo textile non woven fabric sheets of 400 GSM manufactured from polyster/ polypropylene conforming to relevant ISO standard filled with specified sand/ silt from flood plain or adjacent char within a distance of 90m of the work site including excavation, filling Geo bags with sand weighing 126.00kg after filling, stitching the mouth of the filled bags with polypropylene or polyster complete as per technical specifications and as directed. (b) Without Boat |
| 13 | Supply, Stitching and Laying of Non wooven Geo textile Fabric sheet of400 gsm |
| 14 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’sfixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 15 | 600 mm Dia HPCEarth work in excavation of foundation of structure as per drawing and technical specification clause 1104, including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material..(I)Ordinary soil(A) Upto 3m depth |
| 16 | Providing cement concrete for plain/RCC in open foundation complete as per drawing and Technical specificationsClauses 802, 803, 1202 &1203 crushed stone. PCC grade M10 NominalMix 1:3:6 |
| 17 | Providing and laying Reinforced Cement Concrete Pipe NP3 for culverts on 1st class bedding of Geanular Maerial /cc M15 in Single row including fixing collar with cement morter 1:2 and cost of granular bedding but excluding excavation, protection works, back filling concrete and massonary works in head walls and parapets Clause 1106.600 mm dia HPC |
| 18 | Brick masonry work in cement morter in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification clause 1109 in Prop 1:4 |
| 19 | Plastering and cement morter 1:4,15 mm thick on brick work in Sub-Structure as per Technical specification Clause 613.3 |
| 20 | 2_ ConstructionofApproach Roadto Pub Rehabari Ranjit Sangha_Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (a) In area of non thorny jungle |
| 21 | Construction of embankment with material obtained from borrow pits,Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of Tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.5. |
| 22 | Construction of subgrade and earthen shoulderwith approved meterial obtained from borrow oit with all lift and leads , transporting to site ,soreading gradding to required slope and compacted to meet requirement of table 300-2 including cost of testing of materials at site and laboratory as directed by the deptt. |
| 23 | By Mix in place Methd(Construction of granular sub-base by providing close graded material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achive the desired density coplete as per cl.401 (with an initial lead of 5.00Km) (including cost of testing of materials at site and labortory as directed by deptt.) |
| 24 | Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with vibratory roller 8-10 tonnes capacity in stages to proper grade and camber,applying and brooming requisite type of screeninig/binding material to fillup the interstices of coarse aggregate, watering and compacting to reqd. density(with an initial lead of 5.00km) By mechanical means Grading-III(Using Screening type-B)(11.2mm aggregates) |
| 25 | Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage.(a) including Edge block/Edge restraints |
| 26 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(iii) 60cm circular |
| 27 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mmx 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450mm x 450mm x 600 mm bellow ground level as per drawing and technical specefication(ii) 60cm equilateral traingle |
| 28 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 29 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications(80% of the length is considered) |
| 30 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’sfixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 31 | 600 mm Dia HPC ... Earth work in excavation of foundation of structure as per drawing and technical specification clause 1104, including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material..(I)Ordinary soil(A) Upto 3m depth |
| 32 | Providing cement concrete for plain/RCC in open foundation complete as per drawing and Technical specificationsClauses 802, 803, 1202 &1203 crushed stone. PCC grade M10 NominalMix 1:3:6 |
| 33 | Providing and laying Reinforced Cement Concrete Pipe NP3 for culverts on 1st class bedding of Geanular Maerial /cc M15 in Single row including fixing collar with cement morter 1:2 and cost of granular bedding but excluding excavation, protection works, back filling concrete and massonary works in head walls and parapets Clause 1106.600 mm dia HPC |
| 34 | Brick masonry work in cement morter in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification clause 1109 in Prop 1:4 |
| 35 | Plastering and cement morter 1:4,15 mm thick on brick work in Sub-Structure as per Technical specification Clause 613.3 |
| 36 | 3_ConstructionofBalance portion of Road from NH31 to Patarcharkuchi Barbatabari villageClearing andgrubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of l000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means (A) Non Thorny |
| 37 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5(i) Private Land |
| 38 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(i) Private Land |
| 39 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401.(ii) For Grading II Material |
| 40 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(A) By Manual Means |
| 41 | ICBP:: Providing and laying interlocking concrete block pavement (M400 having thickness 80 mm as per technical specification clause 1504 complete including carriage…. (a) Including edge block/ edge restrain |
| 42 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801 ... 600mm equilateral triangle |
| 43 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and Technical Specification Clause 801 ...600mm circular |
| 44 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
