Tender For Up-Gradation Of Street Light And High Mast System With 03 Years Amc At I.A Raebareli Site-I - Supply and erection of steel tubular pole 410-SP-29, 9 m long ,129 Kg ( Bottom G.I) complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45 cm above the ground level. UPSIDA 18-610 2 Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 120 watt confirming to IP 66 protection complete in all respects (With 5 Year Gaurantee(3+2) . Catt. AA as per UPPWD Sch. No.1424 (Bajaj /Philips/Crompton/Wipro Make) 3 Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc 4 Supply & fixing of as per Design Suitable for Fixing Shackle Insulator , Made out of size 50x6 mm M.S.flat Including all bolts with nuts and washers etc. complete in all respect as per UPSIDC Sch. No. 13.1 5 Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle, nuts etc. as pre UPPWD Sch. No. 621 6 Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect rate 7 Supply, sagging, of GI wire 6 SWGon ST Pole For Earth Wire. complete in all respect rate as perUPSIDC Sch. No. 11 8 Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD sch No. 289(Polycab /KEI/ Havells/ Grandly/Gloster Make ) 9 Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc. 10 Supply & laying 70 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. . The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(m) 11 Supply & laying 35 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(k) & 507 (Polycab /KEI/ Havells/ Grandley/Gloster Make) 12 S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (m) 70 sq. mm 3.5 core 13 S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer-incharge as per UPPWD sch. no. 503 (k) 35 sq. mm 3.5 core 14 S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (h) 70 sq. mm 15 S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 35 sq. mm 16 S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 / Digital with ML-4 Contractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f-ii) (40 Amp. TPN) 17 Supply and fixing 25amp.TPN Capacity of Automatic street light cubicle control panel painted with Anti corosive alkali and acid proof paint, consisting of time switch TSO 100 serices/ Digital with ML-4 Contractor, HRC Fuses Isolating switch, metering Instrument & Instrument box with C.T. etc. Complete in all respects.as per UPPWD Sch. No.807(f)(ii) 18 Supply & Erection offactory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuse and The instrument chamber shall be separate and shall comprise of flush type ammeter,voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc complete in all respects. (Incoming 100 Amp., TPN-1 No. & 63 Amp. TPN-1 No and 32 Amp. TPN-2 Nos. .as per UPPWD Sch. No. 801-C-II 19 Strengthening of ST/Octogonal pole/High Mast/Panel, foundation by providing new concreting including broken of weak foundation,excavation below upto Ground level,Surface finishing and painting with white cement and dark yellow colour cost of all material men and T&P complete in all respect 20 Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A) 21 Painting letters (Pole no.) 2.5 cm upto 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&P complete in all respect 22 Supply&Fixxing of of UPSIDA LOGO Plate (Retro-reflective) on High Mast including cost of clamp nut & bolts all material men and T&P complete in all respect 23 Sypply & laying of 90 mm dia DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per DSR Sch. No. 14.16.2 (only road crossing) 24 Supply and fixing of 200 watt factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for confirming to IP 66 protection complete in all respects. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1455 (Bajaj, Crompton, Philips, Wipro Make) 25 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. make as per direction of the Engineer- incharge as per UPPWD Sch. No.652, (Bajaj, crompton, Philips, Wipro Make) 26 Dismantling & re-grouting of Street liht 12 Tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including stranthening of pole by providing additional 04 nnos. Support of 65X65X6mm or higher size MS angle in suitable length with the help of welding/cutting as per tecnical specification. 27 Tree Branches Triming for removing dark spots including cost of all material men and T&P complete in all respect 28 Supply laying and Fixing 50 dia Gi pipe trench less Through manual Boggi including trenching 90 C.M. dccp and refilling etc. 29 Supply and erection of double pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level. 30 Supply and fixing of 11 KV Disc & Disc fittings complete.UPSIDC E03.08 31 Supply and fixing of 11 KV pin insulator complete.UPSIDC E03.07 32 Supply and fixing of 100 mm dia G.I.pipes B,class for climbing up the cable from ground to over head line including all accessories,materials,labours and T&P required for proper completion of work as per specification.UPSIDC E25.01 33 Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.I.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including material. UPSIDC E26.01 34 Supply and fixing of danger board fabricated from 10 gauge M.S.sheet as per I.E.Rules.UPSIDC E27.01 35 Supply & fixing of straight MS Channel 100 x 50 mm 1.15 M long complete as per SIDC Sch. No. 36.02 ER(03.3.01) 36 Supply & fixing of clamp suitable for securing the above channel complete as per SIDC Sch.No.3(4) 37 Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including material,men an T&P for proper completion of work.UPSIDC E.10.(a) 38 11 kV TPMO switch 400 amp complete in all respect as per item no 108 UPPCL rate 39 S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. 40 Supply, installation, testing & commissioning of outdoor type Al. wound oil cooled transformer of rating 25 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I 41 Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506 & 507 (Polycab /KEI/ Havells/ Grandley/Gloster Make ) 42 S/F of Heat Shrinkable jointing kit suitable for XLPE 11 KV HT cable outdoor type including all materials, labour and T&P required for proper competion of work. SIDC sch. No. ER 123 43 Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm)stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respect as per SIDC sch.No E32.01 44 S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 45 Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 46 S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 702 47 supply & Fixing of LED light strip with off-white colour light complete with driver etc.complete in all respect . warranty one years, ( Philips, Bajaj, Crompton, Wipro Make) 48 Fabrication,Supply & Fixing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad 49 Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V grade at a depth of 750 mm beloow ground level over a cushion of 75 mm thick sand alround and protected with burnt brickson sides ant top. On surface the cable run shall be fixed on MS clamps of suitable size or as directed by Engineer in-charge. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c)(Polycab /KEI/ Havells/ Grandlay/Gloster Make) 50 S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core 51 S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm 52 Dismantling & re-grouting of street light 12 tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 nos sopports of 65x65x6 mm or higher size MS angle in suitable length with the help of welding /cutting as per technical specification 53 Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work.UPSIDC Sch. No.24.20.(A) 54 Painting letters (Pole No.) 2.5 cm upto 8.0 cm on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&Pcomplete in all respects 55 Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower,cables,conductors,poles,panels etc and all other available material as per direction of engineer in charge for road lightng in IA to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 12 months (02 Electrican and 02 Helper) 56 Cost of all material, spares wire fuses,small accessories required for general maint.,cleaning,oiling etc.to keep the entire installation in perfect working order during AMC period complete in all respect. 57 Supply & fixing of driver suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect 58 Supply & fixing of MCPCB with LED & Lance ( 70 to 110 watt) for suitable installed LED street light fittings complete in all respect 59 Supply & Fixing of Glass suitable for installed LED street light fittings complete with rubber gasket etc. complete in all respect 60 Supply & fixing of LDR suitable for installed LED street light fittings complete in all respect 61 Supply & fixing of special protection device (SPD) suitable for 70 to 110 watt LED street light fittings as per make installed at Site complete in all respect 62 Dismantaling & Re- Fixing of LED Street Light / Flood Light For Repairing 63 S/F of ML-4 contactor MDS/L&T make complete including all T&P man and material required for proper completion of work 64 S/F of mounting time switch (timer clock) L&T/MDS make complete including all T&P men and material required for proper completion of work. 65 Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 16 sq.mm 2 core cable of 1100 v grade complete.
