Tender for Supply of material, transportation ,design, erection, testing, commissioning for SOP to EV charging location at HRTC Workshop at 61 Miles identified by HRTC in (E) Section Pathiar under ESD, HPSEBL, Nagrota Bagwan under ED, HPSEBL Nagrota Bagwan. (SEOP 11/2025-26)-250 KVA, 11/0.4 kV Distribution Sub-Station 2 Prov.Distribution Transformer (Ordinary), 250 KVA, 11/0.4 kV 3 Prov.Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 4 Prov.Muffs with concerete filling - PROVIDED BY HPSEBL 5 Prov.X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line 6 Prov.MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LAs- PROVIDED BY HPSEBL 7 Prov.X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch - PROVIDED BY HPSEBL 8 Transformer Bed, Belting & Knee Bracing 9 X-Arm:[Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]forTransformer Bed - PROVIDED BY HPSEBL 10 X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] - PROVIDED BY HPSEBL 11 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 12 MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos 13 MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing 14 Transformer LT Distribution Box and GO Switch fixing Assembly 15 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos - PROVIDED BY HPSEBL 16 MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos - PROVIDED BY HPSEBL 17 GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm - PROVIDED BY HPSEBL 18 GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type - PROVIDED BY HPSEBL 19 D.O Fuse Unit 20 Surge Arrester, 9 kV Station Class(Porcelain Type) 21 Discs insulator sets (comprising 1No.Disc(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) 22 Stay set complete- PROVIDED BY HPSEBL 23 Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) 24 Pipe Earthing Set - PROVIDED BY HPSEBL 25 GI wire for Earthing 26 LT Distribution Panel Box with With CoppPer thimbles of 200 Amp, Insulating sleevesetc. MCCB 400 amp 3P 50kA -1 No. ICS 100 % ICU & MCCB 250 Amp 36 kA =3nos 27 Half Clamp (M.S. Flat 50X6 mm) - PROVIDED BY HPSEBL 28 Full Clamps (M.S. Flat 50X6 mm) - PROVIDED BY HPSEBL 29 Nuts and Bolts of Various Sizes(with flat and spring washers)] 30 Aluminium Thimble - PROVIDED BY HPSEBL 31 Aluminium Thimble - PROVIDED BY HPSEBL 32 Danger Plate- PROVIDED BY HPSEBL 33 Barbed Wire 34 LT Cable (3.5 Core) 400 mm² X 2 incommer 35 LT Cable (3.5 Core) 70 mm² X 6 Outgoing 36 Energy Meter (3-Phase, 4-Wire) DLMS compliant 1000/5 A CT Type for 250KVA Transformer 37 Aluminium Paint. 38 Red oxide 39 a)Transformer Bed( Civil Work 40 b) Chain Link fencing , Angle Iron ,Gate etc for transformerfencing 41 CT-PT Unit Belting & Knee Bracing 42 X-Arm:[Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]for CT-PT Unit 43 X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of CT-PT Unit] 44 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 45 MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos 46 MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing 47 Prov. CT-PT Combined Unit 11 KV 15/5 Amp 48 PVC Multistrand 4 mm² copper wire with Φ-1 inch GI pipe for concealing 49 Transportation charges 50 Erection Charges- complete in all respect 51 11 KV H.T Line 52 Prov AAAC 7/3.15mm² Conductor (50mm²) {Includes Cutting and wastage} 53 Steel Tubular Poles (11 m, long) 54 Muffs with concerete filling - PROVIDED BY HPSEBL 55 Run Thro Structures (∆ Formation): on Single Pole Structures (Adopt Eight (8) No. Run-through Structures per Km) - 56 Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) x 8 structure 57 Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures 58 Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] 59 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per polestructure 60 Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side) 61 Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No. 62 X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No. 63 X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] ∆ Formation 64 Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides) 65 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per doublepole structure 66 HT Stay / Guy Arrangement 67 Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) - PROVIDED BY HPSEBL 68 Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) 69 Earthing 70 HT Earthing set complete - PROVIDED BY HPSEBL 71 Double Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m 72 Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} 73 Eye Hook for earth wire 74 Earth Wire Clamp 75 MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing 76 X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting GO switch 77 GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm 78 GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type - PROVIDED BY HPSEBL 79 Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro structure: 2 No ] - PROVIDED BY HPSEBL 80 Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro structure: 2 No] - PROVIDED BY HPSEBL 81 Danger Plate (250X200X1.6 mm) - PROVIDED BY HPSEBL 82 Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more(with flat and spring washers)] 83 Barbed Wire 84 Red Oxide 85 Aluminium Paint 86 Transportation Charges 87 Erection Charges- complete in all respect 88 3-Phase L.T AB Cable 89 LT AB Cable 3 x 185+95mm2 {additional 1% sagging &wastage) 90 Steel Tubular Poles (10 m, long) 91 Muffs with concerete filling - PROVIDED BY HPSEBL 92 Anchoring Assembly 93 Suspension Assembly 94 LT Stay Set - PROVIDED BY HPSEBL 95 Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) 96 Full Clamp 97 Facade Hooks 98 Earthing Set complete 99 Aluminium Paint 100 Transportation Charges 101 Erection Charges - complete in all respect 102 RMU 103 Prov. 11 KV, 630A 21KA-3SEC, outdoor Ring Main Unit (RMU), 2 Nos Motor operated LBS feeder (R ) and one no. Motor operated VCB feeder (L) and BUS metering (ME) + FRTU. Make: Siemens 11KV 3-Way RMU 104 Prov. Chain link fencing, Angle Iron, Gate etc. For RMU fencing 105 Prov. Plinth For RMU 106 Prov.11 KV, Cable (E):- 11 KV Grade, 3-core x 120mm2 (with one spare = 2 x 30= 60 Mtr.) XLPE insulated, Standerd aluminiums conductor, PVC Sheathed, Screened, Armoured cable 107 Prov. 11 KV,Cable End Termination Kits 108 Prov. HP AIO Desktop model HP 440 G9 with:- Intel Core i3-12100-12th Gen. Processor, 8GB DDR4 RAM expandable upto16GB, 512GB SSD, 23” LED color display with FHD(1920x1080), Integrated HD Graphics & 5 MP pull upwebcam with Integrated Dual array and didital microphone, 2xUSB 3.0, 2xUSB 2.0, Audio jack/ VGA/ HDMI/DP port, 10/100/1000M compliant LAN, USB Keyboard & USB Mouse, Internal spkr, connectivity:802.11b/g/n/ac, WiFi 6 with Bluetooth 5.0,PL-Windows 11 Pro 64bit.O.S. :- with Three years onsite warranty. 109 Prov. 650VA Offline UPS System with (Make: Vertiv Libert-ITON (total: 168VAH) SMF batteries to provide 20min. battery backup (with 03 years warranty on UPS & batteries from delivery date). Note: This UPS is plug & play and needs no installation. 110 Hand operated5000V Meggar/Insulation tester 111 Transportation Charges 112 Erection Charges - complete in all respect 113 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.
