In Sugar Mill , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Edo (Acb) 4000Amp. Make: L&T/Schneider. With Ampere Meter, Volt Met Er, Frequency Meter, 3 Phase Indicator Lamp And Energy Meter, Selector Switch, Mcb, Required C.Ts., Powers Nutral Link. - 04 Nos. , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Mod (Acb)6300Amp. Make: L&T/Schneider With Ampere Meter, Volt Met Er, Frequency Meter And Energy Meter, 3 Phase Indicator Lamp., Selector Switch, Mcb, Required C.Ts., Powers Nutral Link.- 02Nos. , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Mod (Acb)1000Amp. Make: L&T/Schneider With 3 Phase Indicator And Ampere Meter., Selector Switch, Mcb, Required C.Ts., Powers Nutral Link. 07Nos. , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Sfu,630Amp. Make: L&T/Schneider With 3 Phase Indicator And Ampere Meter. -09Nos. , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Sfu,400Amp. Make: L&T/Schneider With 3 Phase Indicator And Ampere Meter.- 20Nos. , Supply, Erection And Commissioning Of Panel Cubicle Consisting With Panel Tp Sfu,250Amp. Make: L&T/Schneider With 3 Phase Indicator And Ampere Meter.-03Nos. , Instalation And Commissioning Of New Aluminiumbus Bar Grae-E91e Cap. 10000Amp. Make: Hendalco. , Apfc Capacitor Bank Panel. A. New Panel Of 2500 Kvr Will Be Installed. - 01 Set , Job Work:-A. Dismantling Of Oldpcc Panel In Power House. B. Erection Of New Supplied Pcc Panel. C. New Bus Bar With Ductingand Necessary Connections Will Be Done.D. Commissioning Of Panel.E. Trail &Testing Of Panel And Out Going Supply Of Feeder Will Be Connection And Load Trails Etc. , Details Of Fabrication Of Panel Cubical-A- Main Structure Of Panel-Crca Sheet, B- Load Bearing Surface- 14 Swg Sheet, C- Non-Load Bearing- 6Swg Sheet, D- Construction- Modular Type Compartment Wise E- Surface Treatment- 7 Tank Process, F- Exterior Surface- Powder Coated, Paint Shade: Ra: 7035, G- Protection Class- Ip42, H- Front- Single Front With Back Access, I- Cable Entry-Top Side,J- Gland Plates- Removable Gland Plates (3Mm Thick.),K- Doors- Hinged Draw Out Type Doors, L- Locks. - Die Casting Black Shade Perfect Corporation Make, M-Hinges-Die Casting Black Shade Self Frame Boled, Perfect Corporation Make,N-Gaskets -Neoprene Rubber Gaskets, Powermat Make. Note – 1- Panel Will Be Ms Fabricated And Powder Coated As Per Industry Standard, 2-All Bus Bars Will Be With Bus Duct And Interconnection Of Incomer Panel Of Tg And Bus Couplers And Panel With Bus Duct Will Be In Scope. 3-All Wires Will Be Used Fire Proof Standard. 4-The Paneles Muist Be Of Iec/Nec Standards. , Do 8”Isi/Iso Standard. , Do 10”Isi/Iso Standard. , Do 12” Isi/Iso Standard. , M.S. Long Bend “C” Class ½”Isi/Iso Standard. , Do ¾”Isi/Iso Standard. , Do1”Isi/Iso Standard. , Do 1,1/2”Isi/Iso Standard. , Do 2”Isi/Iso Standard. , Do2,1/2”Isi/Iso Standard. , Do 3”Isi/Iso Standard. , Do4”Isi/Iso Standard. , M.S. Long Bend “C” Class 5”Isi/Iso Standard. , Do 6”Isi/Iso Standard. , Do 8”Isi/Iso Standard. , Do 10”Isi/Iso Standard. , Do12”Isi/Iso Standard. , M.S. Flange Table ‘H’½”Isi/Iso Standard. , Do -¾”Isi/Iso Standard. , M.S. Flange Table ‘H’1”Isi/Iso Standard. , Do1,1/2”Isi/Iso Standard. , M.S. Flange Table ‘H’ 2”Isi/Iso Standard. , M.S. Flange Table ‘H’ 2,1/2”Isi/Iso Standard. , Do 3”Isi/Iso Standard. , Do 4”Isi/Iso Standard. , Do 5”Isi/Iso Standard. , Do 6”Isi/Iso Standard. , Do 8” Isi/Iso Standard. , Do 10”Isi/Iso Standard. , Do 12”Isi/Iso Standard. , M.S. Socket ¼”Isi/Iso Standard. , Do ¾”Isi/Iso Standard. , Do 1”Isi/Iso Standard. , Do1,1/2”Isi/Iso Standard. , M.S. Elbow ½”Isi/Iso Standard. , Do ¾”Isi/Iso Standard. , Do3/8”Isi/Iso Standard. , M.S. Union Socket 3/8”Isi/Iso Standard. , Do½” Isi/Iso Standard. , Do1”Isi/Iso Standard. , G.I. Socket Isi ½”Isi/Iso Standard. , Do¾”Isi/Iso Standard. , G.I. Socket Isi 1”Isi/Iso Standard. , G.I. Union Socket Isi ½”Isi/Iso Standard. , Do¾”Isi/Iso Standard. , Do 1”Isi/Iso Standard. , G.I. Tee ½”Isi/Iso Standard. , Do 1”Isi/Iso Standard. , G.I. Elbow ½”Isi/Iso Standard. , G.I. Elbow 1”Isi/Iso Standard.
