Tender For Repair And Renovation Work At Commerce Department In The University Premises
Tender Value
24.53 Lakhs
Estimated cost
Bid Submission
31 Jul 2025
0 days left
EMD
24540
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Work At Commerce Department In The University Premises
BOQ
| Sl. No. | Item Description |
| 1 | Repair & renovation work at Commerce Department in the University premises |
| 2 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. Spec.No. : As directed by Engineer in charge. .S.S.R. I.No.46.14 P.No.296 |
| 3 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. Spec. No. :As directed by Engineer in charge..S.S.R. I.No.38.26 P.No.235 |
| 4 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. Spec. No. : As directed by Engineer in charge..S.S.R. I.No.46.09 P.No.296 |
| 5 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Spec No. : As directed by Engineer in charge.S.S.R. I.No.46.12 P.No.296 |
| 6 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete Spec. NoAs directed byEngineer in charge..S.S.R. I.No.46.19 P.No.297 |
| 7 | Gr Fl. |
| 8 | 1st Fl. |
| 9 | Removing cast iron or wrought iron or A.C. pipeand stacking them as directed with all leads, lifts etc. complete... Spec. No. As directed by Engineer in charge.S.S.R. I.No.46.28 P.No.297 |
| 10 | Removingdoorsandwindowswithframesandstackingthematerialsasdirectedwithall leads, lifts etc. complete.. Spec. No. As directed by Engineer in charge.S.S.R. I.No.46.15 P.No.296 |
| 11 | Gr Fl. |
| 12 | 1st Fl. |
| 13 | RemovingW.C.pansincludingdisconnectingthesanitaryandwatersupplyconnections, removing and breaking flooring and bed con-crete around pan removingthe same carefully and stackingtheserviceablematerialsasadn wheredirected includingthrowingthe unserviceablemateriaslsoutsideetc.carefullyandthrowingouttherefusaloutsideetc. complete.. Spec. No. As directed by Engineer in charge.S.S.R. I.No.46.41 P.No.298 |
| 14 | Gr Fl. |
| 15 | 1st Fl. |
| 16 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section,to Nost less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. Nos. MORTH 305SSR I.Nos. 2.25, P.Nos.24 |
| 17 | Providing and fixing M40 grade thick vibrated pull cast or simi lar type concrete frame wi th chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And st ir rups@250 mm c/ c and fixing in wall wi th 6 Nos of hold fast of 12 mm dia bars 500 mm long including pr imer and oi l paint ing etc, complete) frame size 60 mm x 100 mm .Spec.No.As directed by Engineer in charge..SSR I.No.39.56 P.No.257 |
| 18 | Gr Fl. |
| 19 | 1st Fl. |
| 20 | Providing and fixing in position powder coated aluminium louvered windows / vent i lator of var ious sizes wi th powder coat ing as per detai led drawing and speci ficat ions including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quali ty etc. complete. Spec. No. : As directed by Engineer in charge..SSR I.No.39.68 P.No.259 |
| 21 | Gr Fl. |
| 22 | 1st Fl. |
| 23 | Providing and fixing mild steel grill work for windows, vent i lators etc.20 kg/ sqm as per drawing including fixtures, necessary welding and paint ing wi th one coats of ant icor rosive paint and two coats of oi l paint ing complete.. Spec. No. : Bd.U. 1 Page No. 537.SSR I.No.40.01 P.No.264 |
| 24 | Providing and laying telephone black / AmbaWhi te / Cadburybrown /Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including fi lling joints wi th polymer base fi ller nosing the sharp edges wherever necessary,cur ing, etc. complete.).Spec. No. As directed by Engineer inharge.SSR I.No.33.68 P.No.220 |
| 25 | Gr Fl. |
| 26 | 1st Fl. |
| 27 | Providing internal cement plaster 12mm thick in single coat in cement mor tar 1:5 with neeru finish to concrete or br ick sur faces, in all posi t ions including scaffolding and cur ing etc. complete. Spec. No. : Bd.L. Page No. 368.SSR I.No.32.03P.No.209 |
| 28 | Gr Fl. |
| 29 | 1st Fl. |
| 30 | Providing sand faced plaster externally in cement mor tar using approved screened sand, in all posi t ions including base coat of 15 mm thick in cement mor tar 1:4 using waterproofing compound at 1 kg per cement bag cur ing the same for not less than 2 days and keeping the sur face of the base coat rough to receive the sand faced t reatment 6 to 8 mm thick in cement mor tar 1:4 finishing the sur face by taking out grains and cur ing for four teen days scaffolding etc.complete.. Spec. No. : Bd. L. 7 Page No. 367.SSR I.No.32.11 P.No.209 |
| 31 | Gr Fl. |
| 32 | 1st Fl. |
| 33 | Providing cement based water proofing t reatment to ter races (Indian water proofing or alike) wi th br ick bats laid in required slope to drain the water for any span after cleaning the base sur face. Applying a coat of cement slur ry admixed wi th approved water proofing compound and laying the br ick bats on bot tom layer in C.M.1:5 admixed wi th approved water proofing compound fi lling up to half depth of br ick bats, cur ing this layer for 3 days, applying cement slur ry over this layer joints of br ick bats wi th C.M.1:3 admixed wi th approved water proofing compound and finally top finishing wi th average 20 mm.thick layers of same mor tar added wi th jute fiber at 1 Kg per bag including finishing the sur face smooth wi th cement slur ry admixed wi th approved water proofing compound.... etc. complete.Spec No.: As directed by Engineer in charge..SSR I.No.31.04 P.No.251 |
| 34 | 1st Fl. |
| 35 | Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mor tar 1:3 wi th neat finishing, float ing using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and cur ing (and fi lling joints of Nahani t rap and any out let by proper ly) etc. complete.. Spec. No. : As directed,, by the Engineer in charge.S.S.R. I.No.31.07 P.No.206 |
| 36 | 1st Fl. |
| 37 | Providing and laying Antiskid Ceramic tiles of approved quali ty of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for ant iskid floor ing in required posi t ion laid on a bed of 1:4 cement mor tar including cement float , fi lling joint wi th cement slur ry cleaning cur ing etc. complete.. Spec. No. :Bd. M-12 page No. 385.SSR Item I.No.33.67 P.220 |
| 38 | Gr Fl. |
| 39 | 1st Fl. |
| 40 | Providing and laying ceramic tiles having size 30 cm. x 45 cm.confirming to cor responding I.S. for dado and skir t ing in required posi t ion wi th readymade adhesive mor tar of approved quali ty on plaster of 1:2 cement mor tar including joint fi lling wi th whi te/ colour cement slur ry cleaning cur ing etc. complete.. Spec. No. : Bd.M.13 Page No. 386.SSR I.No.33.26 P.No.215 |
| 41 | Gr Fl. |
| 42 | 1st Fl. |
| 43 | Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement morarincludingneatcementfloat,filling joints, curing and cleaning etc. complete..Spec.No.Bd.M.12 Page No. 385.SSR I.No.33.42 P.No.217 |
| 44 | Gr Fl. |
| 45 | 1st Fl. |
| 46 | Providing and fixing coloured glazed ear thenware Wash Hand Basin of 63 cm x 45 cm size including cold water pi llar tap/ cold and hot water pi llar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connect ion including P.V.C. waste pipe and t rap up to the outside face of the wall.. Spec. No. Bd.V. 30 Page No. 565.S.S.R. I.No.41.74 P.No.273 |
| 47 | Gr Fl. |
| 48 | 1st Fl. |
| 49 | Providing and fixing 10 cm PVC nahani t rap wi th grat ing etc. complet. Spec. No. BD.V 32 A page 551 and as directed by Engineer in charge..S.S.R. I.No.42.67 P.No.281 |
| 50 | Gr Fl. |
| 51 | 1st Fl. |
| 52 | Providing,layingandfixing,jointing Eco-drain160mmSN4Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 orequivalentasperI.S.15328withfittingssuchabends,tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc.complete.. Spec. No. :As Directected By Engineer Incharge..S.S.R. I.No.43.31 P.No.291 |
| 53 | Providing and fixingOrissa Pan of size 580x445x260 mm with approved make flush valveincluding trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge...As directed by Engineer in charge...S.S.R. I.No.48.38 P.No.315 |
| 54 | Gr Fl. |
| 55 | 1st Fl. |
| 56 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use).Spec No.As directed by Engineer Incharge.S.S.R. I.No.43.20 P.No.289 |
| 57 | Gr Fl. |
| 58 | 1st Fl. |
| 59 | Providing and fixing 15 mm. diameter screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V. 8 Page No. 554..S.S.R. I.No.41.40 P.No.270 |
| 60 | Gr Fl. |
| 61 | 1st Fl. |
| 62 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Bd.V.8 Page No.554..S.S.R. I.No.41.41 P.No.270 |
| 63 | Gr Fl. |
| 64 | 1st Fl. |
| 65 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Bd.V.9 Page No.555.S.S.R. I.No.41.43 P.No.270 |
| 66 | Gr Fl. |
| 67 | 1st Fl. |
| 68 | Providing and fixing 100 mm dia stabi liser pipe/ P.V.C. soi l vent / waste pipe and wi th necessary fixtures and fi t t ing such as bends, tees, single junct ions, slot ted vent , clamps etc. complete..Spec. No.: As directed by Engineer in charge.S.S.R. I.No.42.52 P.No.279 |
| 69 | Gr Fl. |
| 70 | 1st Fl. |
| 71 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high densi ty polythyler and bui lt cor rugated inclusive of delivery up to dest inat ion hoist ing and fixing of accessor ies such as inlet ,out let over flow pipe inclusive of all tanks capaci ty between 200 to 1000 li ters. Spec. No. As directed by Engineer in charge..S.S.R. I.No.42.53 P.No.280 |
| 72 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter andhavingwallthicknessof2.2to2.7mmconfirmingtoI.S.13592- 1992includingproperrainwaterreceivingrecesswithP.V.C.plug, bend,necessaryfittings,suchas,offsets,shoes,inludingfixingthe pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wallafixing with clipsof approvedquality andnumber ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessaryscaffoldingandmaintenancefor3yrsforanyleakagesor dislocationsofpipes.AlltheP.V.C.fittingsandadditional2piece socketclipsshallbegotapprovedfromengineerinchargeetc. complete..Spec No.As directed by Engineer Incharge.S.S.R. I.No.42.87 P.No.283 |
| 73 | Gr Fl. |
| 74 | 1st Fl. |
| 75 | Providing and const ructing Brick Masonry Inspect ion Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundat ion 1:2:4 cement concrete channels half round G.S.W.pipes, Br ick Masonry,plaster ing from inside and wi th frame fixed in cement concrete wi th R.C.C. Cover medium duty 140 kg wi th frame etc complete.. Spec. No. :Bd.V.43, Page No. 574..S.S.R. I.No.42.13 P.No.275 |
| 76 | Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete.Spec. No.:As directed by Engineer in charge .S.S.R. I.No.43.26 P.No.290 |
| 77 | Gr Fl. |
| 78 | 1st Fl. |
| 79 | Providing and fixing 75 mm dia stabi liser pipe/ P.V.C. soi l vent / waste pipe and wi th necessary fixtures and fi t t ing such as bends, tees, single junct ions, slot ted vent , clamps etc. completeSpec. No. : As directed by Engineer in charge...S.S.R. I.No.42.51 P.No.279 |
| 80 | Gr Fl. |
| 81 | 1st Fl. |
| 82 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551..S.S.R. I.No.41.10 P.No.266 |
| 83 | Gr Fl. |
| 84 | 1st Fl. |
| 85 | Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551..S.S.R. I.No.41.11 P.No.267 |
| 86 | Gr.Fl |
| 87 | 1st Fl. |
| 88 | Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551..S.S.R. I.No.41.12 P.No.267 |
| 89 | Gr.Fl |
| 90 | 1st Fl. |
| 91 | Providing and laying in trenches 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/meternecessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. :Bd. V. 5 Page No. 551..S.S.R. I.No.41.18 P.No.268 |
| 92 | Providing and fixing on walls/ cei ling/ floor 15 mm dia. CPVC pipe wi th necessary fi t t ings, remaking good the demolished por t ion etc.complete. Including removing exist ing pipe line i f necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge ..S.S.R. I.No.42.55 P.No.280 |
| 93 | Gr Fl. |
| 94 | 1st Fl. |
| 95 | Providing and fixing 450mm x 550mm size super ior type Belgium mir ror wi th 16mm dia. nickel plated towel rod etc. complete.Spec No.:As directed by Engineer in charge.. S.S.R. I.No.42.20 P.276 |
| 96 | Gr Fl. |
| 97 | 1st Fl. |
| 98 | Providing and fixing chromium plated towel rod 16 mm. diameter and 75 cm. in length including all accessories complete. Spec. No. : As directed by Engineer in charge.S.S.R.I.No.42.31 P.277 |
| 99 | Gr Fl. |
| 100 | 1st Fl. |
| 101 | Providing and fixing in position UPVC ult ra violet stabi lized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints wi th solvent cement etc.complete.Spec No.:As directed by Engineer in charge..S.S.R. I.No.43.25 P.290 |
| 102 | Providing and fixing white glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall.. Spec. No. Bd.V.23 Page No. 562..S.S.R. I.No.41.57 P.No.271 |
| 103 | Providing and fixing on walls/ cei ling/ floor 25 mm dia. CPVC pipe wi th necessary fi t t ings, remaking good the demolished por t ion etc.complete. Including removing exist ing pipe line i f necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge ..S.S.R. I.No.42.57 P.No.280 |
| 104 | Gr.Fl |
| 105 | 1st Fl. |
| 106 | Providing and fixing on walls/ cei ling/ floor 32 mm dia. CPVC pipe wi th necessary fi t t ings, remaking good the demolished por t ion etc.complete. Including removing exist ing pipe line i f necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge ..S.S.R. I.No.42.58 P.No.280 |
| 107 | Gr.Fl |
| 108 | 1st Fl. |
| 109 | Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. completeSpec No..As directed by Engineer in charge.S.S.R. I.No.26.46 P.No.194 |
| 110 | Providing and fixing heavy duty interlocking concrete Coloured paving blocks of 60 mm thickness of having a st rength of 300 kg/ Sq.cm. of approved quali ty and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.Spec.No.As directed by Engineer in Charge.S.S.R. I.No.33.51 P.No.218 |
| 111 | Royalty Charges-as per statement attached |
| 112 | Other material |
| 113 | Carrying out basic tests on cement for standard consistancy,Fineness,Specific avity,Setting time (Initial and Final), Compressive trength,Soundness.Spec.No.As directed by Engineer in Charge.S.S.R. I.No.1 P.No.764 |
| 114 | Carrying out basic tests on Sand for Fineness modulus,Silt and clay content.Spec.No.As directed by Engineer in Charge.S.S.R. I.No.10 P.No.764 |
| 115 | Carrying out basic tests on Sand for chloride and sulphatecontent.Spec.No.As directed by Engineer in Charge.S.S.R. I.No.11 P.No.764 |
| 116 | Carrying out basic tests on G.I.Pipes for wt. per running meter, dia.of pipe and wall thickness of pipe .Spec.No.As directed by Engineer in Charge.S.S.R. I.No.64 P.No.766 |
| 117 | Carrying out basic tests on PVC.Pipes for wt. per running meter, dia.of pipe and wall thickness of pipe .Spec.No.As directed by Engineer in Charge.S.S.R. I.No.65 P.No.766 |
AI Tender Summary
Tender Timeline
Jul 23, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender