|
| 1 | Earthing with G. I. Earth Pipe 4.5 metre Long, 40 mm Dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Charcoal/ coke and salt as required. |
| 2 | Providing and fixing 6 SWG dia G.I. Wire on surface or in recess for loop earthing as required. |
| 3 | Supply of Cable 16.00 Sq.mm 4 Core Al;iminium RR Kabel . Finolex / Gloster make including storing intil laying. |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.Upto 35.00 Sq.mm. |
| 5 | Supplying including ITC of Ready made Street Light Timer panel No. of phase Three Power rating / indicative current rating for relay on 230 V basis and 0.6 PF 3 Phase, 18 kw/ 43 A each phaseSystem Rated Voltage (+/- 10%) 440 Volt. 50 Hz IP Rating IP 54 Manually settable timer with 12 programmes spreded over a year as defined programme Yes Manual ON/OFF Yes Intermediate ON-OFF Yes On/OFF Timing accuracy |
| 6 | Supplying and fixing 5 A to 32 A rating , 240 / 415 V, 10 KA. \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole. |
| 7 | Providing Service Connection charge to be paid to APDCL authority for including load security |
| 8 | Providing 3P 4W ICS DLMS compliant whole current energy meter, 3 x 240 V phase to neutral, 5 - 30 A Class 1.0 with piller proof box for consumer metering |
| 9 | Supplying including installation of the Octagonal Poles shall be designed to withstand the Maximum Wind Speed of 169 KM/ Hrs. The Top Loading i.e. Area and Weight of Fixtures are to be considered to Calculate maximum deflection of the poles and the same shall meet the requirement of BS : 5649 Part-VI 1982. The Pole shaft shall hane Octagonal Cross Section and shall be continously tapered with single longitudinal welding. There shall not be any circumferential welding of the Pole shaft. The welding of the pole shaft shall be done by Submerged Welding Process. All Octagonal Pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be filled welded to the Pole shaft at two location i. e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ / PHILIPS / VALMONT / PARUTHI ENGR / Nezone make).Pole Type BOP or equivalent - 1030 Height 10 M. The materials of the Pole as follows : Conforming to grade S355JO, Base Plate Fe 410 Conforming to IS 226 / IS 2062, Foundation Bolts :- 6.8 Gr. As Per IS |
| 10 | Supply of Cable 70.00 Sq.mm 3.5 Core Al;iminium RR Kabel . Finolex / Gloster make including storing intil laying. |
| 11 | Providing service Connection charge to be paid to APDCL authority for including load security |
| 12 | Providing and Installation of antique design LED Street Light luminaries of 150 Watts D Street Light 200 Watts in the existing Pole with necessary Wiring with 3 core 1.50 Sq. mm sheathed Cable from Pole Junction Box to Light (Philips / Crompton / Bajaj/ LT / Jaguar Make).GENERAL SPECIFICATION LED Rating (In Watts) System Wattage / Rated Power - 200 Watts. Luminaire System Effi Cacy (Lumen / Watts) : >/= 100 Lm / Watt.ngress Protection (IP Rating) as per IS : 10322 (Part-1) : 1982 Latest : IP 66. Warrantry for Free Replacement (In years) : 5 Input Operating Voltage Range: 140 to 270 Volts AC.MORE STANDARDSLED Luninaire Conformity to IS : 10322 / Pat -5 / Section - 3/ 2012 Latest and IS 16107 (Part-2 / Sec -1) : 2012 Latest Yes. Photo Biological Safety of LEDs used shall be as per IS : 16108/ 2012 (Exempt Group) Yes. Types of LED Luminaire as per IS : 16107 (Part - 2 / Sec - 1) / 2012 Type- B. Types of LED Modules as per IS : 16103 (Part - 2) / 2012 Type - 3 ELECTRICAL EFFICIENCY Autometic Higher Cut Off Voltage above 300 Volts Yes Rated Voltage 230 Volts AC 50 Hz, AC Power Factor at Full Load ≥0.95. Driver Efficiency (in % age) upto 100W≥85% Above 100W≥=90% Yes. Total Harmonics Distortion ≤10. The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl:8 of IS : 16104: 2012 Lates) yes. |
| 13 | Providing Arm Bracket 1.00 M and fixing it at existing Pole design etc as approved by this Deptt. a) Single Arm |
| 14 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS: 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. a) 50 mm dia (OD-63 mm & ID-51 mm nominal). |
| 15 | Supplying with installation testing and commissioning of \"G\" Frame Panel Boards, 250 A\"AA\" Frame MCCB, Outgoing 6 ways (IHVGF2500600) as approved and directed by the Deptt. Note (This item is not available in GEM portal) |
| 16 | Construction of shallow foundation with M20 grade concrete for octagonal pole considering the safe soil bearing capacity at site as 10 T/Sq. m at 1.60 mtr (minimum) depth with foundation bolts manufactured from special steel along with nuts, washer, anchor plate, common templates and all materials as directed by the deptt. |
| 17 | 100 Amp 4 Pole MCCB |
| 18 | 40A 4 Pole MCB |
