Tender For Repairs And Recanning Work Of Wooden And Steel Chairs Under Ge (Nb) Visakhapatnam; 1 M & L for repair to CHAIR DINING (rectengular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 2 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (size 30x65x460mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 3 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable seat side rail carefully without disturbing the adjoining partsSupply and fixing of new seat side rail (size 30x65x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canningas required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 4 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable front rail carefully without disturbing the adjoining partsSupply and fixing of new front rail (size 30x65x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canning as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 5 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable rear rail carefully without disturbing the adjoining partsSupply and fixing of new rear rail (size 30x65x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing,drilling of holes @12.5 mm C/C for canning as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 6 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (size 20x25x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueingas required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 7 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 8 M & L for repair to CHAIR DINING (rectengular pattern)by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-279) 9 M & L for repair to CHAIR DINING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 65x45x890mm with upper end to be chamfered at 45 degree and lower ende at 25x25mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) 10 M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (size 45x45x460mm with lower end size 25x25mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) 11 M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable Back rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x15mm curved out of size 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) 12 M & L for repair to CHAIR DINING (Square pattern)by taking down/removing the existing broken /unserviceable Side/Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side/Centre Stiffner (size 25x20x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-203/228) 13 M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (size 25mm dia at bottom, 45mm dia at entre and 25mm dia at top made out of 65x45x865mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 14 M & L for repair to CHAIR DINING (Circular pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (size 25mm dia at bottom, 45mm diatop made out of 45x45x460mm with upper end to be chamfered at 45 degree) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 15 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Front rail carefully without disturbing the adjoining partsSupply and fixing of new Front rail (size 65x30x420mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 16 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Rear rail carefully without disturbing the adjoining partsSupply and fixing of new Rear rail (size 65x30x405mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 17 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Side rail carefully without disturbing the adjoining partsSupply and fixing of new Side rail (size 65x30x430mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 18 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (size 25x19x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 19 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (size 25x19x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 20 M & L for repair to CHAIR DINING (Circular pattern)by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 45x12 curved out of size 50x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16) 21 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 55x25x490mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 22 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (Size 55x25x545mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 23 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 70x40x575mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 24 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 55x25x510mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 25 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 50x25x480mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 26 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Frame (Size 55x20x480mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 27 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Bottom Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Bottom Frame (Size 55x40x480mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 28 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Side Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Side Frame (Size 70x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 29 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Wooden Member carefully without disturbing the adjoining partsSupply and fixing of new Wooden Member (Size 20x15x440mm) screwed to side frame including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 30 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 65x25x610mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 31 M & L for repair to CHAIR EASY (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front/Back Base Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Front/Back Base Stiffner (Size 55x25x510mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229) 32 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear/Front leg carefully without disturbing the adjoining partsSupply and fixing of newRear/Front leg (Size 40mm dia at Centre & top and 20mm dia at bottom out of 40x40x490mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 33 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 70x25x530mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 34 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 55x25x520mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 35 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 50x25x480mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 36 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Back Frame carefully without disturbing the adjoining partsSupply and fixing of new Back Frame (Size 55x19x480mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 37 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Side Frame carefully without disturbing the adjoining partsSupply and fixing of new Side Frame (Size 25x70x530mmincluding drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 38 M & L for repair to CHAIR EASY (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 65x25x600mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-17) 39 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 30x55x660mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 40 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 41 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat SideRail (Size 30x65x535mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 42 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 30x65x470mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 43 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 30x65x535mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 44 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (Size 25x20x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 45 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (Size 25x20x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 46 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 50x15mm curved out of size 50x35x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 47 M & L for repair to CHAIR WRITING (Rectangular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 60x25x520mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-280) 48 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 25 mm dia at both ends and 45 mm dia at centre made out of size 45x45x685mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 49 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 25 mm dia at bottom, 20 mm dia at top and 45 mm dia at centre made out of size65x45x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 50 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Side stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side stiffner (Size 25x19x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 51 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Centre stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre stiffner (Size 25x19x515mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 52 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new FrontRail (Size 30x65x515mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 53 M & L for repair to CHAIR WRITING (Circular Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 55x19x480mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20) 54 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size bottom 25x25mm out of 45x45x715mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 55 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size Bottom 25x25mm out of60x45x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 56 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 25x20x420mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 57 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 25x20x535mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 58 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Front Rail (Size 30x65x535mm) including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 59 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Rear Rail (Size 30x65x470mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 60 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Side Rail (Size 30x65x420mm including drilling holes @ 12.5mm c/c for canning) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 61 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (size 20x15mm curved out of size 50x30x470mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 62 M & L for repair to CHAIR WRITING (Square Pattern) by taking down/removing the existing broken /unserviceable Arm Rest carefully without disturbing the adjoining partsSupply and fixing of new Arm Rest (Size 60x25x425mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-202/250) 63 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 55x30x835mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 64 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable front leg carefully without disturbing the adjoining partsSupply and fixing of new front leg (Size 55x30x455mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 65 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 30x65x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 66 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 65x30x445mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 67 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 68 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 69 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 20x25x445mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 70 M & L for repair to CHAIR WOODEN BOTTOM by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (Size 50x15mm out of size 50x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 71 M & L for repair to CHAIR WOODEN BOTTOMby taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat made of 6mm thick one side teak face ply provided with 6mm dia holes 08 Nos at centre and shall be fixed with screws from top complete all as specified, shown on drawing and as directed. (Drg No. FD-285) 72 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Rear leg carefully without disturbing the adjoining partsSupply and fixing of new Rear leg (Size 30x55x890mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 73 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Front leg carefully without disturbing the adjoining partsSupply and fixing of new Front leg (Size 30x55x460mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 74 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Side Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Side Rail (Size 30x65x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 75 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Front Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Front Rail (Size 65x30x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 76 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Seat Rear Rail carefully without disturbing the adjoining partsSupply and fixing of new Seat Rear Rail (Size 65x30x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 77 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Side Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Side Stiffner (Size 20x25x430mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 78 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Centre Stiffner carefully without disturbing the adjoining partsSupply and fixing of new Centre Stiffner (Size 20x25x440mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 79 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable Back Rest carefully without disturbing the adjoining partsSupply and fixing of new Back Rest (Size 45x15mm out of 45x35x405mm) made of 1st class Teak wood includingtightening the joints, pinning, screwing, nailing, wedging glueing, as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 80 M & L for repair to CHAIR DINING JCO (MAP) by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining partsSupply and fixing of new seat made of PVC 4mm thick, 4x10mm thick ribs moulded alonwith seat in single piece (as per Approved make) screwed to seat rails or fix over additional support frame duly provided from centre to centre complete all as shown on drawing and as directed. (Drg No. FD/E6/MAP/05) 81 S & F in repair Hard Rubber shoe of best quality as per the existing size and specifications, fixed to various type of chiars complete all as specified and directed. 82 Supply and fixing in repairs Bracket made of 1st class Teak wood of size 3x3 of thickness 25mm and fixingto each leg and rail with adhesive and wooden screws to various types of chairs repaired above complete all as specified, shown on drawing and as directed. 83 M & L for Polishing to wooden Chair Dining/ CB B (all Pattern) with french polish of approved grade and brand with two or more coats after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade, filling putty to the bore holes, making the surface smooth by sanding and grinding with hand held grinding machine, All as directed by Engineer-in-charge and as specified. (Drg No. FD-279, 203, 228, 16 & F/DB)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) 84 M & L for Polishing to wooden CHAIR EASY (All Pattern) with french polish of approved grade and brand with two or more coats after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade, filling putty to the bore holes, making the surface smooth by sanding and grinding with hand held grinding machine, All as directed by Engineer-in-charge and as specified. (Drg No. FD-229, 201, 17)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) 85 M & L for Polishing to wooden CHAIR WRITING (All Pattern) with french polish of approved grade and brand with two or more coats after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade, filling putty to the bore holes, making the surface smooth by sanding and grinding with hand held grinding machine, All as directed by Engineer-in-charge and as specified. (Drg No. FD-280, 250, 202, 20)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) 86 M & L for Polishing to wooden CHAIR WOODEN BOTTOM with french polish of approved grade and brand with two or more coats after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade, filling putty to the bore holes, making the surface smooth by sanding and grinding with hand held grinding machine, All as directed by Engineer-in-charge and as specified. (Drg No. FD-285)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) 87 M & L for Polishing to wooden CHAIR DINING JCO/OR (MAP) with french polish of approved grade and brand with two or more coats after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade, filling putty to the bore holes, making the surface smooth by sanding and grinding with hand held grinding machine, All as directed by Engineer-in-charge and as specified. (Drg No. FD/E6/MAP/05)(Note: The polishing shall be carried out after making the article intact by tightening all parts and after carrying out antitermite and antibug treatment) 88 M & L for repair to CHAIR DINING/CHAIR CBB by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour,The border of seat / back shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-16, 203, 228,279)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) 89 M & L for repair to CHAIR EASY Seat by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour,The border of seat shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229, 201, 17)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) 90 M & L for repair to CHAIR EASY Back by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.50mm thick of white colour,The border of Back shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-229, 201, 17)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) 91 M & L for repair to CHAIR WRITING/CHAIR CB A by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, 2mm to 2.5mm wide, 0.5mm thick of white colour,The border shall be weaved with 4mm wide 1st quality Virgin plastic cane as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-20, 280, 202, 250, DB-4124)(Note: The caning of chairs shall be carried only after finishing with painting / polishing all as required at site.) 92 M & L for repair to various type steel chairs by running welding at damaged joints of legs/stiffner etc n.exc 6mm thick of metal to be welded and applying one coat of red oxide zinc chrome primer to welded surfaces complete all as shown on drawing, as specified and directed. 93 M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 20mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-19/256) 94 M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable rusted MS rod from the chair carefully and S & F new MS rod, 10mm dia connecting rear legs, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-19/226) 95 M & L for repair to CHAIR VERANDAH (MS) by Painting frame of the Chair verandah with two coats of Milk white colour synthetic enamel paint of approved 1st quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty and one coat of primer where required complete all as directed by Engineer-in-charge and as specified. (Drg No. FD-19/256) 96 M & L for repair to CHAIR VERANDAH (MS) by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic cane, white, half round of size 4.0mm wide and 0.5mm thick as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-19, 256)(Note: The caning of chairs shall be carried only after finishing with painting all as required at site.) 97 M & L for repair to CHAIR VERANDAH (ALU) by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 25mm dia aluminium conduit of 16G (1.6mm thick), fixed all as shown on drawing complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-259) 98 M & L for repair to CHAIR VERANDAH (ALU) by tightening of all loose joints etc including replacement of worn out nuts, bolts, washers etc to retain the stability of chair complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-259) 99 M & L for repair to CHAIR VERANDAH (ALU) by taking down/removing the existing broken /unserviceable cane plastic and recanning the chairs in true Godrej pattern with 1st quality Virgin plastic tube 8mm dia and cane with Mat pattern and end of tube to be fixed to seat/back frame with screws and washers as directed and total weight of cane shall be 1.3 Kg per chair as required with standard workmanship complete all as specified, shown on drawing and as directed. (Drg No. FD-259) 100 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by taking down/removing the existing broken /unserviceable rusted Rear Leg or Seat/Back Rest frame from the chair carefully and S & F new Rear Leg or Seat/Back rest Frame made of 25mm dia conduit of 1.6mm thick, fixed by proper gas welding and applying one coat of red oxide zinc chrome primer to the external surfaces of new conduit after preparation of surfaces complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD-75(M)) 101 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by Painting frame of the Chair with two coats of OG colour synthetic enamel paint of approved 1st quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty where required complete all as directed by Engineer-in-charge and as specified. (Drg No. FD-75(M)) 102 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by taking down/removing the existing broken /unserviceable seat frame and S & F of new frame made of first class teak wood and canned with 2mm wide and 0.4mm thick on seat and borders with 4.0mm wide and 0.5mm thick, half round Virgin cane plastic cane, 1st quality of approved colour in true Godrej pattern as required with standard workmanship including painting or polishing of seat as required and fixede with 40 Nos GI Nuts, bolts and washer of size 3 long complete all as specified, shown on drawing and as directed. (Drg No. FD-75(M)) 103 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by taking down/removing the existing broken /unserviceable Back frame and S & F of new frame made of first class teak wood and canned with 2mm wide and 0.4mm thick on seat and borders with 4.0mm wide and 0.5mm thick, half round Virgin cane plastic cane, 1st quality of approved colour in true Godrej pattern as required with standard workmanship including painting or polishing of seat as required and fixede with 40 Nos GI Nuts, bolts and washer of size 3 long complete all as specified, shown on drawing and as directed. (Drg No. FD-75(M)) 104 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by taking down/removing the existing broken /unserviceable Arm Rest and S & F of new new Arm Rest made of first class teak wood including necessary french polishing and fixed with MS screws etc complete all as specified, shown on drawing and as directed. (Drg No. FD-75(M)) 105 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by replacement ofexisting broken /unserviceable Hard Rubber bush and fixed with MS screws complete all as specified, shown on drawing and as directed. (Drg No. FD-75(M)) 106 M & L for repair to CHAIR CB STEEL WITH ARM AND WITHOUT ARM by replacement ofexisting broken /unserviceable Hard Rubber Cap for rear leg top side to fix for open end of the conduit pipe complete all as specified, shown on drawing and as directed. (Drg No. FD-75(M)) 107 M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted mild steel strip from the chair carefully and S & F new mild steel strip of 375mm long, 25mm wide and 3mm thick, fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) 108 M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Rear Leg from the chair carefully and S & F new mild steel rear leg made of 16mm dia MS conduit pipe 18 Gauge thickand 400mm long fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) 109 M & L for repair to CHAIR VERANDAH (MS STRIP) by taking down/removing the existing broken /unserviceable rusted Front Leg from the chair carefully and S & F new mild steel Front leg made of 16mm dia MS conduit pipe 18 Gauge thickand 550mm long fixed by proper gas welding complete all as per the existing specifications, shown on drawing and as directed. (Drg No. FD/E6MAP/11) 110 M & L for repair to CHAIR VERANDAH (MS STRIP) by Painting frame of the Chair verandah with two coats of Milk white colour synthetic enamel paint of approved 1st quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth and make smooth by applying metal putty where required complete all as directed by Engineer-in-charge and as specified. (Drg No. FD/E6MAP/11) 111 S&F in repair PVC hard shoe cap complete all as specified and directed 112 M & L for repair to CHAIR VERANDAH (PVC SEAT) by taking down/removing the existing broken /unserviceable PVC seat and back from the chair and supply and fixing new PVC seat and back (Approved make), 4mm thick to the chair verandah MAP after providing flat iron of 20mm x 5mm support at centre of seat only by proper welding for support of PVC seat complete all as per the existing size and specifications, shown on drawing and as directed. (Drg No. FD/MAP-II/06)(Note: PVC seat and back shall be fixed to chairs only after painting of chiars)
