Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-08-2025 | Corrigendum No. 01 | BOQ | 12-08-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed. |
| 3 | Supply and fixing 105 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregate and Material and labour PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed. |
| 4 | Supply and fixing 2nd class HW factory made glazed and skeleton shutters 35 mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed. |
| 5 | Supply and fixing galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 6 | Supply and fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed. |
| 7 | Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification etc complete all as specified and directed. |
| 8 | Supply and fixing factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face &5mm prelam PVC sheet on back face, supplying & fixing in frame at site etc complete all as specified and directed. |
| 9 | Supply and fixing glazed (5.0 mm thick plain /coloured glass)aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm , &lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mmwith handles 2 Nos in each door , hinges has fitted on frame as requiredfixed with rubber gasket & aluminum beading any No of panels with aluminum handle ,locking arrangemen,floor door stopperincl. necessary joining cleats , glazing clips and floor springsetc complete, confirming to IS complete all as specified and directed. |
| 10 | Supply and fixing fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm, half portion will be fixedwith 3.50 mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.50 mm. |
| 11 | Supply and fixing aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 92.34 X 39 mm, side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top & bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4.00 mm thick tintedglass with rubber gasket, brush and aluminium beading, aluminium wire mess 0.45 mm dia and width of aperture 1.45 mmetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.50 mm. |
| 12 | Supply and fixing Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia300 mm long with locking arrangement, 2 Nos of tower bolt of200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size4 Nosbutt hinges including necessary cutting, welding, binding as required with and two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces, including taking down existing MS shutter with frame complete all as specifiedand as directed.Note: Single shutters of approx width 0.8 to 1.2 m andht 1.9 to 2.10 M. |
| 13 | Supply and fixing Aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 14 | Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 15 | Supply and fixing Stainless steel grating of 100 mm dia dome typeetc complete, including taking out existing grating etc complete all as specified and directed. |
| 16 | Supply and fixing Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed. |
| 17 | Supply and fixing 100mmButt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed (for PVC Door) complete all as specified and as directed. |
| 18 | Supply and fixing Aluminium handles 100mm size, cast type, anodised complete all as specified anddirected. |
| 19 | Supply and fixing Aluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and as directed. |
| 20 | Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beadscomplete all as specified and directed. |
| 21 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 22 | Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc, including taking out existing wire cloth with beading complete all as specified and directed. |
| 23 | Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortarfor inserting holdfasts in exc. One brick but not exc. two brick walland making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TypeB-1 as required complete all as specified and directed. |
| 24 | Dismantling posts or struts (wood,steel or RCC) post embeded in concrete, bricks, masonary, etc any section, including taking out embedded portion and making good disturbed ground etc complete all as specified and directed. |
| 25 | Site clearance in soft/loose soil etc complete all as specified and directed. |
| 26 | Dismantling of chain link MS fencing of any thickness or size and round bar etc complete all as specified and directed. |
| 27 | Excavating in post holes in any type of soil each n.exc 0.5 cum , getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 28 | Material and labour for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 29 | Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling & mass concrete etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 30 | Material and labour for PCC in embedding of chain link fencing, rounded or chamfered on edges with type B1 (1:2:4) using 20 mm graded aggregate including necessary formwork etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 31 | Supply and fixing mild steel Angle ironas in posts and struts in fencing includingcutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | Supply and fixing 10 mm dia mild steel plain round bar as in line wire for securing chain link fencing confirming to Fe-410 W complete all as specified and directed. |
| 33 | Supply and fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.Note: Weight of chain link fencing will be ascertain by BOO. |
| 34 | Supply and fixing framed work such as grills gratings,sunshed cover fixed with nut bolts incl,cutting drilling holesetc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290gde E 165 etc, including dismantling of existing framed work complete all as specified and directed. |
| 35 | Material and labour for painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over and including a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. |
| 36 | Material and labour for applying two coat synthetic enamel paint over and including a coat of red oxide primer on new steel surface n.exc. 10 cm in width or girth when un-connected with other painting or when painted in different tint complete all as specified and directed. |
| 37 | Supply and fixing galvanized 2 strand 2.00 mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins etc. complete all specified & shown on drawing, Each row of wire to be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin etc, including dismantling of existing barbed wire complete all as specified and directed. |
| 38 | Material and labour for cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 39 | Material and labour for coloured designer tiles exterior grade (ENDURA or Equivalent make as given in Appx \"C\") 8-10 mm thick as in flooring laid over and including 15 mm thick cement mortor 1:6 set and jointed and pointed in neat cement slurry with grey cement and pigment etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 40 | Material and labour for coloured designer tiles exterior grade (ENDURA or Equivalent make as given in Appx \"C\") 8-10 mm thick as in dado / skirting/ riser of stepsetc. over and including 10mm thick rendering in cm (1:4), set and jointed and pointed in neat cement slurry with grey cement and pigment etc complete, including dismantling of existing tiling with cement mortar plastering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 41 | Material and labour for digital glazed ceramic joint free(rectified) coloured tiles on vetical surfaces size 600x300x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 15mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 42 | Material and labour for coloured anti skid ceremic tiles 7 to 8 mm thickarea of each tiles exc. 0.06 sqm and n. exc. 0.11 sqmas in floor etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 43 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treatedwith aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50mm thick uniformly levelled surface ofstone dust cushioning, including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement etc complete, including dismantling of existing floor tiling/stone slab/paver block with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 44 | Material and labour for providing cement concrete1:2:4 type B-0 (12.5 mm graged aggregate)as in window or door cills, lintels, bressumers, steps, quoin, blocks, cover slabs ,coping , bands,shelves etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 45 | Material and labour for providingreinforced cement concrete (nominal mix) Type B -1,1:2:4 (20 mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams and bases for columns etc, including demolition of existing reinforced cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 46 | Material and labour for providingreinforced cement concrete (nominal mix) Type B -1,1:2:4 (20 mm graded stone aggregate)as in columns, pillars, piers, post and struts etc, including demolition of existing reinforced cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 47 | Material and labour for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 48 | Material and labour for 5 mm dia and over upto and including 10 mm dia TMT bars cut to length, bent to shape required includingcranking bending spirally for stirrups, spacers, and binbers and binding with and including mild steelwire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 49 | Form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed. |
| 50 | Form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed. |
| 51 | Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 52 | Supply and fixing structural Steel work in purlins / rafters/ post with round / rectangular/ square hollow mild steel tubelar trusess and other section confirming to IS.1161- 1979 grade St.-240 complete all as specified and directed. |
| 53 | Supply and fixing MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 290 Gde E 165) complete all as specified and directed. |
| 54 | Supply and fixing Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 11 to 15 mm complete all as specified and directed. |
| 55 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, AZ 150 trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws of any gauge, thickness complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 56 | Supply and fixing 0.50 mm thickpre-painted galvalume aluminium zinc coating GI based (AZ-150) coloured ridge suitable for profile pattern sheetfixed with self driving screws complete, including dismantling existing damaged Asbestos cement sheets complete all as specified and directed. |
| 57 | Material and labour for brick work with sub class \"B\"old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. |
| 58 | Material and labour for walling of random rubble wall bonded, beddedand solidly hearted built in CM(1:6) complete, including demolition of existing brick/stone masonry, built in cement mortar with all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. |
| 59 | Taking down existing cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removel of rubbish outside of MOD land complete all as specified and directed. |
| 60 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick /concrete/stone surface finished even and smooth without using extra cement etc complete all as specified and directed. |
| 61 | Material and labour for rendering in two layers, first layers of 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and second layer of 5 mm thick in cement morter 1:4 with and including water proofing compound @ 3% by wt of cement etc complete all as specified and directed. |
| 62 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling etc complete all as specified and directed. |
| 63 | Material and labour for preparing the new plastered surfaces and applying three coats of white wash on walls all as specified and direcrted. |
| 64 | Material and labour for Three coat of white wash on old decorated surface of walls including preparation of old surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting etc complete all as specified and directed. |
| 65 | Material and labour for preparation of old ceiling surfaces and applying two coats ofWhite wash on ceilingsurfaces etc complete all as specified and directed. |
| 66 | Material and labour for applying three coats of white wash on new Ceiling surface including preparation of surface etc complete all as specified and directed. |
| 67 | Complete removal of existing treatment of old surfaces ofwalls etc and Material and labour for applying two or more coats of 100% exterior premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over old surfaces, including preparation of surface complete all as specified and directed. |
| 68 | Complete removal of existing treatment of old surfaces ofwalls etc and Material and labour for applyingbirla / J. K. wall care whiteputty 1 mm thick in two layerfor levelling the surfaces of oldwalls and applying two coats of acrylic emulsion paint , white or tinted over and including a coat of interior wall primer etc complete all as specified and directed. |
| 69 | Material and labour for Two coats of synthetic enamal paint over and including a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of old painted steel surfaces complete all as specified and directed. |
| 70 | Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 71 | Supply and fixingGI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 20 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 72 | Supply and fixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 15 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 73 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 74 | Supply and fixing in renewal vitreous china WHB white flat back size 550x400mm including Supply and fixing angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long as required high pressure complete all as specified and directed. |
| 75 | Supply and fixing in renewal vitreous china squatting pan \"Orrisa pattern\" size 580x440mmwhitewith integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etccomplete all as specified and directed. |
| 76 | Supply and fixing PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket, flush pipe & bend complete of capacity 10 litres etc complete, including taking out existing flushing cistern etc complete all as specified and directed. |
| 77 | Supply and fixed angular stopvalve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe etc complete, including taking out existing angle cock/stop valve etc complete all as specified and directed. |
| 78 | Supply & fixing pillar taps, fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed etc complete, including taking out existing pillar tap etc complete all as specified and directed. |
| 79 | Supply and fixing C P bib taps two ways cast copper alloyfancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed etc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 80 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm etc complete, including taking out existing PVC connection etc complete all as specified and directed. |
| 81 | Supply and fixing 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union etc complete, including taking out existing shower rose etc complete all as specified and directed. |
| 82 | Supply and fixing soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete, including taking out existing soap dish complete all as specified and directed. |
| 83 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete, including taking out existing towel rail etc complete all as specified and directed. |
| 84 | Supply and fixing Bevelled edge looking mirror of size 600x450 selected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer etc complete, including taking out existing looking mirror etc complete all as specified and directed. |
| 85 | Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or laid in trenches including ms clamps etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 86 | Supply and fixingPVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors/wall etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 87 | Supply and fixing PVC (SWR) bends 110 mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 88 | Supply and fixingPVC (SWR) bends 75mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 89 | Supply and fixing PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequal etc complete, including taking out existing T/Y etc complete all as specified and directed. |
| 90 | Supply and fixing PVC(SWR) vent cowl of 110mm dia etc complete, including taking out existing cowl etc complete all as specified and directed. |
| 91 | Material and labour forPCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etcon roof top as a leveling course / paddingto maintainthe slope,finished the surfaces even and smooth without using extra cement etc complete all as specified and directed. |
| 92 | Taking out of oldroof treatment of any description including mud phushka, lime, concrete, tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete and provn of water proofing roof treatment with material and labour to RCC roof with approved modified membrane of weighing not less than 3kg/sqm and thickness of membrane not less than 3.00mm comprising with following items and all as specified.(i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut as specified and directed.(ii) Material and labour for rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200 ml per bag of 50 kg cement applied over roof slab complete all as specified and directed.(iii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing treatment of weight not less than 3 Kg / sqm and thickness of membrane not less than 3.00mm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqmover the membrane.(vii) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site.(viii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including Material and labour for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site as directed by Engineer In Charge. |
| 93 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 94 | Material and labour for surface point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 95 | Material and labour for surface point wiring for one Call Bell point controlled by one push button switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 96 | Material and labour for surface point wiring for 5Amp independent socket point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 97 | Material and labour for surface point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 98 | Material and labour for surface power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 99 | Material and labour for concealed point wiring for one light or fanpoint controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 100 | Material and labour for concealed point wiring for onecall bell point controlled by one push button switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 101 | Material and labour for concealed point wiring for one5 Amp independent socket point controlled by one switchwith 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 102 | Material and labour for concealed point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 103 | Material and labour for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc.of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 104 | Supply and fixing Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed . |
| 105 | Supply and fixing socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed . |
| 106 | Supply and fixing switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed . |
| 107 | Supply and fixing socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed . |
| 108 | Supply and fixing modular fan step regulator 120W2 module complete all as specified and directed. |
| 109 | Supply and fixing modular bell push 6A ,1 module complete all as specified and directed. |
| 110 | Supply and fixing switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed. |
| 111 | Supply and fixing socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed. |
| 112 | Supply and fixing switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed. |
| 113 | Supply and fixingsocket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V complete all as specified and directed. |
| 114 | Supply and fixing ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 115 | Supply and fixing lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 116 | Supply and fixing bell ding dong 230 V, single phase complete all as specified and directed. |
| 117 | Supply and fixing electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed. |
| 118 | Supply and fixing bell push flush type one way 5Amp 240 Volt complete all as specified and directed. |
| 119 | Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of01 Single core of size4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green etc complete, including taking down old unserviceable sub main wiring with casing-caping/conduit complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length. |
| 120 | Supply and fixing testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed. |
| 121 | Supply and fixing testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed. |
| 122 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 123 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 124 | Supply and fixing LED bulb 10 watt B22 Base suitable for angle / batten holder fitting complete all as specified and directed. |
| 125 | Supply and fixing box type LED optic fitting10/9 Watt2 feet box type complete all as specified and directed. |
| 126 | Supply and fixing TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. |
| 127 | Supply and fixing socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination etc complete, including taking down existing S/S combination complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
