Tender For Construction Of Warehouse 600 Mt And Machinery Shed 94.05 Sq. Mtr.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Aug 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vaijapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Warehouse 600 Mt And Machinery Shed 94.05 Sq. Mtr.
BOQ
| Sl. No. | Item Description |
| 1 | Excavationfor FOUNDATION inEARTH, SOILOF ALL TYPES, SAND, GRAVEL and SOFT MURUM, including removing the excavated material up to a distance of50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering includingshoringandstruttingetc.complete.(Liftupto1.5 m.) By Mechanical Means. |
| 2 | Excavation FOR FOUNDATION IN HARD MURUM including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, wateringincludingshoringandstruttingetc.complete.(Lift upto 1.50 m) By Mechanical Means. |
| 3 | ProvidingSOLINGusing80mm.sizetrapmetalin15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete. |
| 4 | ProvidingandlayingCastinsitu/ReadyMixcement concreteinM-10oftrap/granite/quartzite/gneiss metal for FOUNDATION and BEDDING including bailing outwater,Steelcentering,formwork,laying/pumping, compacting,rougheningthemifspecialfinishistobe provided,finishingifrequiredandcuringcomplete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 5 | Filling in PLINTH and FLOORS with APPROVED EXCAVATEDMATERIALin15cm.to20cm.Layers including watering and compacting etc. complete. |
| 6 | FillingINPLINTHandFLOORSwithCONTRACTOR\"s MATERIAL/broughtfromoutsideandapprovedby Engineer incharge in layers of 15 cm to 20 cm includingwatering and compaction etc. complete. |
| 7 | Providing PRECONSTRUCTIONALANTITERMITE TREATMENTasper I.S.6313(Part-II) bytreatingTHE TOPSURFACEOFPLINTHFILLINGattherateof5 litresofemulsionconcentrateat1.0percentofclorophyrifosperOneSquareMetreofsurfacearea covering ten years guarantee on bond paper.. |
| 8 | Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. workinFOUNDATIONSlikeRAFT,STRIP FOUNDATIONS,GRILLAGEandFOOTINGSofR.C.C.COLUMNS and STEEL STANCHIONS etc. including bailingoutwater, Steelcentering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete,withfullyautomaticmicroprocessorbased PLCwithSCADAenabledreversibleDrumTypemixer/ concrete Batch mix plant (Pan mixer) etc. complete. Withfine aggregate (Crushed sand VSI Grade) |
| 9 | ProvidingandlayingCastinsitu/ReadyMixcement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. COLUMNS as per detailed designs and drawingorasdirectedincludingsteelcentering, formwork, cover blocks, laying/pumping, compaction finishing the formedsurfaces withcement mortar 1:3 of sufficient minimum thickness to give a smooth and even surfaceor rougheningifspecialfinishis tobe provided andcuringetc.complete.(Excludingreinforcementand structural steel).with fully automatic micro processor basedPLCwithSCADAenabledreversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSIGrade) |
| 10 | ProvidingandlayingCastinsitu/ReadyMixcement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. BEAMS and LINTELS as per detailed designs anddrawingsorasdirectedincludingsteelcentering, formwork,cover blocks,laying/pumping,compactionand roughening the surface if special finish is to be provided andcuringetc.complete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessor basedPLCwithSCADAenabledreversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSIGrade) |
| 11 | ProvidingandlayingCastinsitu/ReadyMixcement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. CHAJJA as per detailed design and drawings includingsteelcentering,formwork,coverblocks, laying/pumping, compacting and roughening the surface ifspecialfinishistobeprovidedandcuringcomplete. (Excludingreinforcementandstructuralsteel).withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) |
| 12 | ProvidingandfixinginpositionTMT-FE-500bar reinforcement of various diameters for R.C.C. pile caps, footings,foundations,slabs,beamscolumns,canopies, staircase,newels,chajjas,lintelspardis,copings,fins, arches etc. as per detailed designs, drawings and schedules.including cutting,bending, hookingthe bars, bindingwithwiresortackweldingandsupportingas required complete. |
| 13 | Providing second class BURNT BRICK MASONRY with conventional/I.S.typebricksincementmortar1:6in FOUNDATIONSandPLINTHofinnerwalls/inplinth externalwallsincludingbailingoutwatermanually, strikingjointsonunexposedfaces,rakingoutjointson exposed faces and watering etc. Complete. |
| 14 | Providing second class BURNT BRICK MASONRY with conventional/I.S.typebricksincementmortar1:6in SUPERSTRUCTURE including striking joints, raking outjoints, watering and scaffolding etc. Complete. |
| 15 | Providing and fixing ROLLING SHUTTER fabricated from STEELLATHSofminimum thickness0.9mmwithlock plateof3.15mm thicknessreinforcedwith35x35x5 mm angle section fitted with sliding bolts and handles for bothsides,deepM.S.channelsectionofdepthand thickness not less than 65 mm and 3.15 mm respectively withholdfastarrangements,M.S.Bracketplate300x 300 x 3.15 mm minimum size and shape with square bar, suspensionshaftofminimum32mmdiameter,hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanicalgearoperationarrangementconsistingof worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete.(I.S. 62481979) (Without mechanical gear) |
| 16 | Providing and fixing STEEL VENTILATOR FULLY GLAZED PARTLY FIXED as per detailed drawing WITHOUTHOTDIPZINCCOATINGincluding fabricatingglazingwithplain/obscuredglasspanes5 mm thick and approved type and quality and iron oxidizedfixturesandfasteningoilpaint2coatsetc. complete. |
| 17 | Providing and laying in situ CEMENT CONCRETE M-20 with TREMIX TREATMENT for 100 mm. thickness FOR FLOORINGwithgroovecuttingof4mm.wideand20 mm.deepwithnecessaryrefillingwith bitumenetc. complete. |
| 18 | Providing INTERNAL CEMENTPLASTER 12mm. thick in SINGLE COAT in cement mortar 1:4 WITHOUT NEERUFINISHtoconcreteorbricksurfaces,inallpositions including scaffolding and curing etc. complete. |
| 19 | Providing SAND FACED PLASTER externally in cement mortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesand facedtreatment6to8mmthickincementmortar1:4 finishing the surface by taking out grains and curing forfourteen days scaffolding etc.complete. |
| 20 | Providing INTERNAL CEMENTPLASTER 20mm. thick inSINGLECOATSincementmortar1:4WITHOUT NEERU FINISH to concrete, brick surface, in all positionsincluding scaffolding and curing etc.complete. |
| 21 | ProvidingandlayingPOLISHEDSHAHABADSTONE SLABS 20 to 25 mm. thick FOR TREADS and RISERS ofSTEPSandSTAIRCASES,withroundednosingfor thetreadsonabedof1:4cementmortarincluding cement float, filling joints with neat cement slurry, curing,polishing and cleaning etc. complete. |
| 22 | Providing and fabricating STRUCTURAL STEEL WORK inrolledsectionslikeJOISTS,CHANNELS,ANGLES, TEESetc.asperdetaileddesignanddrawingsoras directedincludingcutting,fabricating,hoisting,erecting, fixing in position making riveted / bolted /welded connectionswithoutconnectingplates,bracesetc.and including one coat of anticorrosive paint and over it two coatsofoilpaintingofapprovedquality andshadeetc.complete. |
| 23 | Providing and fixing colour coated Zincalume ( R ) AZ150 (min150gms/sq.mt.totaloneachside)PROFILED SHEETSforROOFING.Thefeedmaterialis manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zincalloy(55%aluminium43.4%zinc1.6% silicon)withCOLORBOND(R)steelqualitysuper durablepolyesterpaintcoat(withinorganicpigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface.Profilesheetshallhavenom.950-1050mm effectivecoverwidthandnominal25-30mmdeepribs with subtle square fluting in the five pan at nominal 180- 250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed materialshouldhavecoilmanufacturersproductdetails markedaregularinterval.Includingfastenerswithmin. fastenedwithmin.25umZinc-Tinalloycoated,Hex head, self-drilling screw etc. complete. (weight of profile4.52 Kilogram/ One Square Metre) |
| 24 | Providing and fixing CORRUGATED GALVANISED IRON SHEETS of 0.63 mm. thick (24 B.W.G.) for ROOFINGwithoutwindtilesincludingfasteningwith galvanisedironscrewsandbolts,leadandbitumenwashers as per drawing etc. complete.(Weight of 5.5 |
| 25 | ProvidingandfixingPLAINZINCSHEETINGof0.80 mm. thick (22 B.W.G.) over the RIDGE HIP or VALLEY toGALVANISEDIRONSHEETROOFINGincludingall fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 26 | Providing and fixing P.V.C. RAIN WATER PIPES of 110 mm.outer diameter andhavingwallthicknessof2.2to 2.7mmconfirmingtoI.S.13592-1992includingproper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mmto40mmfromfaceofwallafixingwithclipsof approvedquality andOneNumber,filing thejoint using rubbergasketwithsolventcementandproperlyresting theshoeofpipeson C.C.or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakagesordislocationsofpipes.AlltheP.V.C.fittings and additional 2 piece socket clips shall be got approvedfrom engineer in charge etc. complete. |
| 27 | Supplying Turbo ventilator 24\" as directed by Engineer in charge. |
| 28 | Providingandapplying TWOCOATS of EXTERIOR WEATHERSHIELDPAINTofapprovedmanufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applying primer coat, scaffolding if necessary and wateringthesurfacefortwodaysetccomplete.NOTE: For Item One Number 15 to 18 prior approval ofSuperintending Engineer will be necessary. |
| 29 | Providingandfixingboarddisplayinginformation,such as\"Nameofwork,Tendercost,NameofContractor, Workcompletionandliabilityperiodetc\",having rectangularshapeof1.20mx0.90msizemadeout18 gauge (1.25mm) thick mild steel sheet painted with one coatofZincchromatestovingprimerandtwocoatsof enamelpaintonfrontsideandgreystoveenamelon backsideandborder/messages/symbolsetc.with approved colour shade paintcomplete, onM.S.angle of size35x35x3mmframewithproperlycrossbracedM.S.anglesofsize35mmx35mmx3mmdulypainted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec.No.Asdirected by Engineer in Charge |
| 30 | Providingandfixing6mmthickISImarkAsbestos Cement RIDGE CAPPING for ROOFING including galvanised iron hooks, bolts, galvanised iron and bituminouswashers, galvanised iron clamps, bolts, nutsincluding scaffolding etc. complete. |
| 31 | Providing and fixing 12 mm dia. MILD STEEL BAR upto 0.5 M. length for ANCHOR RODS with necessary threading nuts and bolts etc. complete. |
| 32 | Providing and applying TWO COATS of WATER PROOF CEMENT PAINT of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing thesurface, watering for two days etc. complete. |
| 33 | Add for Royalty Charges (For Sand After 01/07/2021). |
| 34 | Add for Royalty Charges (For Other Material After 01/07/2021). |
| 35 | Carrying out testing for Cement [ A ] Standard Consistancy,Fineness,SpecificGravity,SettingTime(Initial & Final), Compressive Strength, Soundness. |
| 36 | CarryingouttestingforConcrete[A]Compressive Strength of C. C. cube (Set of 3 cubes). |
| 37 | Carrying out testing for Bricks [ A ] Water Absorption (Set of5Bricks)CompressiveStrength(Setof5Bricks),Efforescence (Set of 5 Bricks). |
| 38 | Carryingouttestingfor SteelBar Testing[A]Upto 16 mm. (Set of 3 Bars). |
| 39 | Supplying,erecting&terminatingFRXLPEinsulated, galvanised steel wire armoured (round) cable, 1100 V 3 core6sq.mm.aluminiumconductorcompleteerected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipeas per specification no. CB-LT/AL |
| 40 | MakingtrenchinSoftsoilhaving0.75mdepthand minimum0.3mwidthforlayingprovidedcablesupto voltage level of1.1kV complete as per specification no.CW-EXN-CTR |
| 41 | MakingtrenchinHardmurum/Tarroadhaving0.75m depth and minimum 0.3m width for laying provided cablesuptovoltagelevel1.1kVcablecompleteasperspecification no. CW-EXN-CTR |
| 42 | Supplying&erectingmainswith3x2.5sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no.WG-MA/BW |
| 43 | Supplying&erectingCRCAsheetmetalenclosuresof1.2mm thickness with 10A, 2 pin plug & earth socket and 10A,3pinplugtopwith10AsinglepoleMCBhaving rated short - circuit breaking capacity (Icn) 10kA complete erected on provided angle iron/GI frame. |
| 44 | Point wiring for light/fan/bell in 20 mm HMS PVC conduit with1.5sq.mm(2+1E)FRLSHgradecopperwirewith flush type switch and required accessories as perspecification no.WG-PW/SW |
| 45 | Supplying&erecting10-12W,230VintegraltypeLED Lamp suitable for B22/E-27 base as per specification no.FG-LP. |
| 46 | Supplying and erecting integrated LED street light fitting 18 - 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W,CRI>70,CCTupto6500K,THD<10%,p.f.>0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of50,000 Hrs at L70B50 including driver complete with minimum 2 Years warrantyas per specification No. FGODF/SL. |
| 47 | Supplying and erecting Street light bracket made from 40mm.dia‘B’classG.I.Pipe,0.6m.inlengthalongwith pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG- BKT/BPC. |
| 48 | Supplying, installing and testing earthing with galvanised iron earth plate size 60 x 60 x 0.6 cm complete with all accessoriesofGImaterials&recordingtheresultsasper specification No. EA-EP |
| 49 | Supplying,installingandtestingpipetypeearthingwith 40mm.dia.G.l.pipeor20mmdia.G.I.Rodcomplete withallaccessoriesofGImaterials&recordingtheresults as per specification no. EA-EP |
| 50 | Supplying,erecting&markingDPMCB6Ato32A,C- serieswithratedshort-circuitbreakingcapacity(Icn) 10kAinprovideddistributionboardasperspecificationno. SW-MCB |
| 51 | Supplying,erecting&markingSPMCB6Ato32A,B- serieswithratedshort-circuitbreakingcapacity(Icn) 10kAinprovideddistributionboardasperspecificationno. SW-MCB |
| 52 | Supplying, erecting, testing & commisioning GI sheet 1.6 mm(16SWG)havingzinccoatingof350micronswith galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat ofred leadpaintand 2coats ofenamel paint as per specification no.CP/SH/CR |
| 53 | Supplying, erecting, testing & commisioning marine (Waterproof) plywood 18/19 mm thick fixed to wall or on providedpanelboardwithnecessarymaterialssuchas screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 as per specification no. CP/SH/CR |
| 54 | Supplying&erectingtriplepoleandneutraldistribution board (TPNDB), 3 pole MCCB as incomer & outgoing SP MCB(12poles)orTPMCBof4ways(12poles),with door, 1.2mm thickness, surface/flush mounted, on providediron/GIframe(verticalbusbartype)asperspecification no. SW-SWR/MCBDB1 |
| 55 | Supplying&erectingG.I.pipe‘A’class25mmdia.for enclosingXLPEarmoured cableonwall/pole asperspecification no. CB-CE |
| 56 | Supplying&erectingG.I.pipe‘A’class40mmdia.for enclosingXLPEarmoured cableonwall/pole asperspecification no. CB-CE |
| 57 | Supplyingandlaying(includingexcavationofsuitable width&depthupto90cm) 75mm outsidedia.double wallcorrugatedpipes(DWC)ofHDPEforenclosingcable below ground/road surface, complete. |
| 58 | Supplying & erecting single compression type brass cable glands for 3 to 4 core6 sq mm /2 to 4 core 10 sqmm cableas per specification No. CB-GL |
| 59 | Supplying and erecting ceiling rose/ batten holder/ slanting holder/ hanging cord switch/ hanging bell push/ pendant holder bakelite base 6A erected on filled polypropyleneboardorpolisheddoublewoodenblock/PVC junction box. |
| 60 | Point wiring for independent plug in 20 mm metal conduit with1.5sq.mm(2+1E)FRLSHgradecopperwire,flush typeswitch,earthingandrequiredaccessoriesasperspecification no.WG-PW/SW |
| 61 | Wiringforplugonboardwithswitchsocket surface/concealedtype,copperwiringandearthingand with modular accessories as per specification no.WGPW/CW |
| 62 | Supplying&erectingmainswith2x2.5sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places.as per specification no.WG-MA/BW |
| 63 | Supplying&erectingmainswith2x4sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places.as per specification no.WG-MA/BW |
| 64 | SupplyinganderectingmodulartypeD.P.switch32A withindicatoronprovidedplateandboxwithwiringconnections complete. |
| 65 | Supplying, erecting and marking double pole isolator only switchversionofminiaturecircuitbreakerof40Awith requiredwiringconnectionsandlugsetc.inprovideddistribution board. |
| 66 | Supplying & erecting 3W, 230V integral type LED Lamp suitablefor B-22/E27baseasper specificationno. FG-LP. |
| 67 | Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproofand dustproofindustrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, BeamAngleof120deg.,Ripple<5%,THD<10%,p.f.>0.95, operating range of 120-270V, surge protection of 4kV,Lifeclassof50,000Hrs.atL70B50,IP20rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3years warranty. |
| 68 | Supplyinganderectingregular/standardmodelceiling fan of 900 /1050 mm. sweep complete erected in positionas per specification no. FG-FN/CF |
| 69 | Supplyinganderectingdingdong/electronicmusical type call bell with heavy duty coil suitable to operate on 230VA.C.supplyerectedonpolisheddoublewoodenblock / sunmica block of suitable size. |
| 70 | Supplying and erecting Street light bracket made from 25mm.dia‘B’classG.I.Pipe,0.6minlengthalongwith pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG- BKT/BPC. |
| 71 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FPMCB/RCCB/RCBOcompleteerectedonprovided angle iron/GI frame. |
| 72 | Supplying,erectingandmarking4poleisolatoronly switchversionofminiaturecircuitbreakersof40Ainprovided distribution board. |
| 73 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct |
AI Tender Summary
Tender Timeline
Jul 22, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender