Repair of Electrical panel,lift room, painting of Ground Floor Boundary Grill, installation of Fire Door, Lock change of existing Fire Door etcat Banga bhawan,3, Hailey roadUnder Banga Bhawan Sub-Divisionduring the year 2025 - 2026- 1 (Page - 189,It.No.- 01 ) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:6 cement mortar, (b) 15 mm thick plasterElectrical panel and lift room 2 (Page 143,it.no.16 c) (c) Supplying 6 levers Godrej Crystal Satine Mortice Lock with keys includingfitting & fixing completei)150mm 3 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 4 (Page 294,it.no.24)Providing and fixing of factory made uPVC Sliding window (White Colour)complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frameand sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fastenersand after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half ofwidth of window) window frame of size 122 x 54 mm & Sash of size 64 x 47 mmboth having wall thickness of 2.3 ± 0.2 mm 5 (Page 137,it.no.6)Supplying, fitting, Fixing Fly / Mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete. 6 (Page 195,it.no.7) Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification andas per direction of the EIC. (In Ground Floor) 7 (Page:11, Item 10) Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. Electrical panel, lift machine room 8 (Page 198,it.no.5)Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) 9 (Page 201,it.no.4) Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Electrical panel, lift machine room 10 (Page 200,it.no.1 A) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. 11 (Page 200,it.no.2 A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With other than hi-gloss of approved quality- (ii) Two coats (white in shade)out side main gate, outside grills 12 (Page 173,it.no. 4 )Supplying, fitting and fixing boiling water proof block board conforming toIS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor ii)19mm 13 (Page 243,it.no.9) Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 14 surface mounted overhead door closer etc for leaf width upto 1100mm
