Tender For Repair And Maintenance Of Park At E5/82 Ward 45 Zone 10 - Repair And Maintenance Of Park At E5/82 Ward 45 Zone 10 2 Premium Adults Air Walker Technical Specifications· Length: - 2200Mm X Width: - 2100Mm X Height: -1430Mm, Safe Area: -2.0Mete, maintenance-Madhya Pradesh

Tender For Repair And Maintenance Of Park At E5/82 Ward 45 Zone 10 - repair and maintenance of park at e5/82 ward 45 zone 10 2 Premium Adults Air Walker Technical Specifications· Length: - 2200mm x Width: - 2100mm x Height: -1430mm, Safe Area: -2.0meter x 1.8meter.· Premium Adults Air Walker equipment made up of ‘’B’’ class GI pipe ofdifferent NB. NBstands for Nominal boar size i.e. internal diameter of pipe inmillimeters. Make of GI Pipewill be of Tata, Jindal, and Swastik. The main frame structure pipe is80 NB for Both Side inArch Shape. Center Handle frame is made up of 25 NB Footrest GI.Pipe is 40NB. Especially Design Profiles is cuts with plasma cutting. The pins usedare made up of N 8material ø 25mm., to build bushes are used are seamless pipe of 60mm OD& 6mm thickness. Prime stand supporting bush Dia. 125 NB. Main Paddle support bearingbush made of G.I125NB. Instruction board- Support structure is made up of 1.8 mmthickness MS plate. Peddle Movement restricted by specially designed mechanism(Interlocking). Instructionsticker Printed on PETG sheet with UV resistance. The footrest madefrom aluminum castingmaterial & Size is 125 x 305 x 5mm with the support of 250mm x 115mm x3mm thicknessMS plate. The foundation for fixing is structure and made form centerpipe of G.I. of 80 NBwith 40mm x 20mm x 3mm thickness pipe also used. Main pipe supportedwith 25mm x25mm MS angle of 3mm thickness. Base plate are made up of MS roundplate ø250. *Foundation Covering Cap is made up of FRP/Roto material of Dia. 295mm. *High tensilesteel with galvanized nuts & bolts are used for assembly. The bearingare used ‘‘6205’’permanent lubricated bearings & the bearings are used reputed brand(SKF/FAG). * Lockingthe circlips A24 used for assembly. * The powder coating is done withpure polyester powderof Ackzonoble or Berger with 60 to70 micron thickness. 3 Premium Adults Big Turning Wheel Technical Specifications· Length: - 1450mm x Width: - 1930mm x Height: -2230mm. * Safe Area: -1.9 x 1.9 meter.· Premium Adults Big Turning Wheel made up of B class GI pipe ofdifferent NB. NB standsfor Nominal boar size i.e. internal diameter of pipe in millimeters. *Make of GI Pipe will beof Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NBfor Both sides in curveshape. * The ring frame Size is 25 NB made from B class of G.I. pipe.* Big Ring 2 NosConnection link is 25 NB made up of B class of G.I. pipe. * Wheelconnecting pipe is 32 NBmade of B class of G.I. pipe. * The nitrogen hardness pins used aremade up of N 8 ø 25mm.* Especially Design Profiles is cuts with plasma cutting. * To buildbushes are used areseamless pipe of 60mm OD & 6mm thickness. * The foundation for fixing isstructure andmade form center pipe of G.I. of 80 NB with 40mm x 20mm x 3mm thick pipealso used. Mainpipe supported with 25mm x 25mm MS angle of 3mm thickness. * Instructionboard- Supportstructure is made up of 1.8 mm thickness MS plate. * Instruction stickerPrinted on PETG sheetwith UV resistance. * Base plates are made up of MS round plate ø250. *End Caps in SSMaterial are used to cover the bushes. * High tensile steel withgalvanized nuts & bolts are usedfor assembly. * The bearings are used 6205 permanent lubricatedbearings the bearings areused reputed brand (SKF/FAG). * The circlips A24 used for assembly. *The powder coatingis done with pure polyester powder of Ackzonoble or Berger with 60 to70micron thickness. 4 Premium Adults Surf Board Technical Specifications· Length: - 2300mm x Width: - 3300mm x Height: - 1740mm. * Safe Area: -1.39 x 1.27 meter· Premium Adult Surf Board equipment made up of ‘’B’’ class GI pipe ofdifferent NB. NBstands for Nominal boar size i.e. internal diameter of pipe inmillimeters. * Make of GI Pipewill be of Tata, Jindal, and Swastik. * The main frame structure pipe is80 NB in Arc Shape. *Handle frame is made up of 25NB. * The paddle frame is made up of 32NBof B class of G.I.pipe. * The Nitrogen hardness pins used are made up of N 8 ø 35mm., tobuild bushes are usedare seamless pipe of 70mm OD & 6mm thickness. * Prime stand supportingbush Dia. 125NB.* Main Paddle support bearing bush made of G.I 125 NB. * Instructionboard- Support structureis made up of 1.8 mm thickness MS plate. * Peddle Movement restricted byspecially designedmechanism. * Instruction sticker – Printed on PETG sheet with UVresistance. * EspeciallyDesign Profiles is cuts with plasma cutting. * The footrest made fromaluminum castingmaterial 350mm x 210mm x 5mm. With the support of 250mm x 150mm x 3mmthick MSplate. * The foundation for fixing is structure and made form centerpipe of G.I. of 80 NB with40mm x 20mm x3mm thick pipe also used. * Main pipe supported with 25mm x25mm MSangle of 3mm thickness. * Base plates are made up of MS round plateø250. * FoundationCovering Cap is made up of FRP material of Dia. 295mmHigh tensile steelwith galvanizednuts & bolts are used for assembly. * The bearings are used ‘‘6207’’permanent lubricatedbearings. Bearings are used reputed brand (SKF/FAG). * The circlips A34used for assembly.The powder coating is done with pure polyester powder of Ackzonoble orBerger with 60 to70micron thickness. 5 Premium Adult Leg Press Double Technical Specifications· Length: - 2440mm x Width: - 2900mm x Height: - 1600mm. * Safe Area: -2.8 x 1.4 meter.· Premium Adult Leg Press Double equipment made up of ‘’B’’ class GIpipe of different NB.NB stands for Nominal boar size i.e. internal diameter of pipe inmillimeters. * Make of GIPipe will be of Tata, Jindal, and Swastik. * The main frame structurepipe is 80 NB in ArchShape. * The outer frame is 25 NB made from B class of G.I. pipe. *Footrest on Rest of MS.Square pipe is 50 x 50 mm. * The nitrogen hardness pins used are made upof N 8 ø 35mm. *The seat and back rests are fitted on the outer frame are made up ofhigh quality of fiber plasticmaterial of size 335mm x 310mm x 3mm thickness. * Prime stand supportingbush Dia.125NB. * Main Paddle support bearing bush made of G.I 125NB, to buildbushes are used areseamless pipe of 60mm OD & 6mm thickness. * The footrest made fromaluminum castingmaterial 125 x 305 x 5mm thick. With the support of 250mm x 115mm x 3mmthick MS plate.* The footrest frame is made of 25 NB of B class of G.I. pipe. *Especially Design Profilesis cuts with plasma cutting.*Instruction board- Support structure ismade up of 1.8 mm thickMS plate. * Seat Movement restricted by specially designed mechanism(Interlocking). *Instruction sticker – Printed on PETG sheet with UV resistance. * Thefoundation for fixing isstructure and made form center pipe of G.I. of 80 NB with 40mm x 20mmx3mm thick pipealso used. Main pipe supported with 25mm x 25mm MS angle of 3mmthickness. * Base platesare made up of MS round plate ø250. * Foundation Covering Cap is made upof FRP materialof Dia. 295mm. * High tensile steel with galvanized nuts & bolts areused for assembly. * Thebearings are used ‘‘6205’’ permanent lubricated bearings. Bearings areused reputed brand(SKF/FAG). * The cerclips A24 used for assembly. The powder coating isdone with purepolyester powder of Ackzonoble or Berger with 60 to70 micron thickness. 6 Premium Adult Chest & Seated Press Technical Specification· Length: - 1840mm x Width: - 3260mm x Height: -2400mm, * Safe Area: -3.0meter x1.7meter· Premium Adult Chest & Seated Press made up of ‘’B’’ class GI pipe ofdifferent NB. NBstands for Nominal boar size i.e. internal diameter of pipe inmillimeters. * Make of GI Pipewill be of Tata, Jindal, and Swastik. * The main frame structure pipe is80 for both sides in curveshape. * Handle frame is made up of 32 NB. * The connecting pipe is madeof 25 NB. * Primestand support pipes is made up of 50mm x 50mm sq. pipe with weatherproof powder coating.* To build bushes are used are seamless pipe of 60mm OD &6mm thickness.* The foundationfor fixing is structure and made form center pipe of G.I. of 80 NB with40mm x 20mm x3mmthick pipe also used. Main pipe supported with 25mmx 25mm MS angle of3mm thickness. *Especially Design Profiles is cuts with plasma cutting. * The seat andback rests are fitted onthe outer frame are made up of high quality of fiber plastic material ofsize335mmx310mmx3mm thickness. * Instruction board- Support structure ismade up of 1.8 mmthick MS plate. * Instruction sticker – Printed on PETG sheet with UVresistance. * Thenitrogen hardness pins used are made up of N8 ø25mm & ø17mm material. *Base plate aremade up of MS round plate ø250. * Bearing Closing SS caps are used tocover the bushes. *Foundation Covering Cap is made up of FRP material of Dia. 295mm. * Hightensile steelwith galvanized nuts & bolts are used for assembly. * The bearing areused ‘‘6205’’& ‘‘6203’’permanent lubricated bearings. Bearings are used reputed brand(SKF/FAG). * The cerclipsA24 & A16 used for assembly. * The powder coating is done with purepolyester powder ofAckzonoble or Berger with 60to70 micron thickness. 7 Premium Adult Twister of Seat & Stand Position Technical Specification· Length: - 2860mm x Width: - 2860mm x Height: -1290mm. * Safe Area: -3x 3 meter· Premium Adult Twister of Seat & Stand Position made up of ‘’B’ classGI pipe of 65NB, 25NB& 80NB. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * Themain frame pipe is 80NB. * The ring frame is 25 NB made from B class of G.I. pipe. *Connection link is made upof 25 NB & of B class of G.I. pipe. * The nitrogen hardness pins usedare made up of N8ø30mm. * To build bushes are used are seamless pipe of 70mm OD & 6mmthickness. * Thefootrest frame is made of 32 NB of B class of G.I. pipe. * Thesupporting frame is made of25 NB of B class of G.I. pipe. * The twister plate is fitted on thesupporting frame is made upof 65 NB G.I. Pipe. Ø300mm x8mm thickness M.S. round plate &forsupporting plate isø150mm x8mm thick. * Especially Design Profiles is cuts with plasmacutting. * Thefoundation for fixing is structure and made form center pipe of G.I. of89 NB with 40mm x20mm x3mm thick pipe also used. Main pipe supported with 25mmx 25mm MSangle of 3mmthickness. * Instruction board- Support structure is made up of 1.8 mmthick MS plate. *Instruction sticker – Printed on PETG sheet with UV resistance. * Baseplates are made up ofMS round plate ø250. * Foundation Covering Cap is made up of FRPmaterial of Dia. 295mm.* High tensile steel with galvanized nuts & bolts are used for assembly.* The bearings are used‘‘30206’’ permanent lubricated bearing & also 6206 is used. * Thecirclips A29 used forassembly. The powder coating is done with pure polyester powder ofAckzonoble or Bergerwith 60 to70 micron thickness.

INR 2000 /-

INR 5.60 Lakhs /-