Repair To Internal Water Supply Sanitary Fittings And Welcome Maint Of Md Accn In Zone-I At Mil Stn Samba; 1 M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6,Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land, complete all as specified and directed. 2 Description all as item No 02 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thickIncluding Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 3 Material and labour glazed ceramic colouredtiles in vertical surface300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 4 M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 5 Description all as item No 04 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 6 M&L Virified Ceramic tiles(light shade) 8 mmthick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortor 15mm thick in CM 1:6, Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. 7 Description all as item No 06 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete all as specified and directed. 8 M&L Marble work 16 to 18 mm thick green marble(table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shadeover and including screed bed or bedding layer of mortor 15mm thick in CM 1:6.Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 9 M&L Black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.® over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6.Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing) and removing rubbish Out side Mod land. complete all as specified and directed. 10 M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 11 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:4 ,( Upto 10 Mtr height including necessary scaffolding) rendering is to be finished even and fair without using extra cement with andincluding Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. 12 M&L Rendering cement plaster, 10 mm thick on fair faces of brick/concrete surfacesof wall in cement mortar 1:6 finished even and smooth w/o using extra cementincluding Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. 13 M&L Rendering 5 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area,complete all as specified and directed. 14 supply only Liquid water proofing compoundcomplete all as specified and directed. 15 Preparationof newplastered/ concrete surfaces of walls andapplying two coats of cement based paint over and includingone coat of primer (up to 2nd storey with necessary/scaffolding)complete all as specified and directed. 16 Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty andone coat of primer complete all as specified and directed. 17 Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washingcomplete all as specified and directed. 18 Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding complete all as specified and directed. 19 Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper onwalls, pillars,cornices surface including making good holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed. 20 Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coat of oil bound distemper onwalls, pillars,cornices surface over one cat ofbirla white wall care putty coloured in same shade where ever required etc. complete all as specified and directed. 21 Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed. 22 M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,Including Demolition ofreinforced cement concrete of any discription ground to 2nd floors and removingthe rubbish from the work site out side defence premises complete all as specified and directed. 23 M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips, complete all as specified and directed. 24 M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and directed. 25 M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workexc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified and directed. 26 Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqmeach Refixing the same opening complete all as specified anddirected. 27 Supplying and laying of20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.including all necessary fittings to join CPVC TO GI Pipes, FTA,MTA,bends,Tee etc including taking out old GI pipe with fitings complete all as specified and as directed Note:Rates are inclusive ofBrass T,Brass Elbow ,MTA,FTA, for provision ofsanitary /plumbing fittings where ever required complete all as specified and directed. 28 Supplying and laying of25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.including all necessary fittings to join CPVC TO GI Pipes, FTA,MTA,bends,Tee etc including taking out old GI pipe with fitings complete all as specified and as directed Note:Rates are inclusive ofBrass T,Brass Elbow ,MTA,FTA,for provision ofsanitary /plumbing fittings where ever required complete all as specified and directed. 29 S&F in repair 15 mm Bib taps,chromium plated fancy typecast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and directed. 30 S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated screwed down, high pressurewith crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 31 S&Fin repair 15mm bore stop valve fancy type chromium plated withlong shank and cup (concealed type)screwed down, high pressurewith crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 32 S&Fin repair15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 33 S&Fin repair15mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 34 S&F in repair brass Chromium plated shower roses 125 mm sizewith or without swivel joints, any size, includingshower arm (not less than 195 mm long) and fixing to steel pipe or union, complete all as specified and directed. 35 S&F in repairPVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. 36 S&Fin repair10 litres CapacityPVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs ofHigh or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed. 37 S & Fin repair Vitreous China wash down water closet pan (pedestal pattern), white includingfixing bolts, connection to drain/ trap (out going pipes ) and to flushing pipecomplete all as specified and directed. 38 S & Fin repair plastic water closet seat cover (closed pattern)with PVC Hinging device for pedastal pans complete all as specified and directed. 39 S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. 40 S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug,waste coupling , waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. 41 S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantileverbrackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. 42 S&F in repair Vitreous China, wash basin white, flat back , size 630x450 mm including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and directed. 43 Supply and fixing in repair Cast Iron soil waste and ventpipes 100 mm bore single socketed in any length with or without ears, with cement joints, laid in trenches orin floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 44 Supply and fixing in repair Cast Iron soil waste and ventpipes 75 mm bore single socketed in any length with or without ears, with cement joints, laid in trenches orin floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 45 Supply and fixing in repairCast Iron soil waste and ventpipes 100 mm bore single socketed in any length with or without ears, with cement joints, fixed to wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 46 Supply and fixing in repairCast Iron soil waste and ventpipes 75 mm bore single socketed in any length with or without ears, with cement joints, fixed to wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 47 Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured)75 mm bore , complete all as specified and directed. 48 Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) 100 mm bore , complete all as specified and directed. 49 Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured)with access door any radius 75 mm bore , complete all as specified and directed. 50 Supply and fixing, in repair Cast Iron , bends any radius , diminishing pices or tapers (larger bore measured) with access door any radius100 mm bore , complete all as specified and directed. 51 Supply and fixing, in repair cast Iron branch piece single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branches with access door equal or unequal for 100 mm bore ,complete all as specified and directed. 52 Supply and fixing, in repair cast Iron branch piece single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branches with access door equal or unequal for 75 mm bore, complete all as specified and directed. 53 Supply and fixing, in repair cast iron P’ trap for 100mm bore including dismantling of exixting trap, complete all as specified and directed. 54 Supply and fixing in repairCast Iron floor trap 75 mm dia plain with CPgrating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 55 Supply and fixing in repair PVC (SWR)pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and directed. 56 Supply and fixing in repair PVC (SWR)pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 57 Supply and fixing in repair PVC (SWR)pipes 110 mm bore single socketed in any length with rubber ringjoints, fixed ti wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 58 Supply and fixing in repair PVC (SWR)pipes 75 mm bore single socketed in any length with rubber ringjoints, fixed ti wall ,Including Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from sitecomplete all as specified and directed. 59 Supply and fixing, in repair PVC (SWR) , bends any radius 75 mm bore , complete all as specified and directed. 60 Supply and fixing, in repair PVC (SWR) , bends any radius110 mm bore , complete all as specified and directed. 61 Supply and fixing, in repair PVC (SWR) , bends with access door any radius 75 mm bore , complete all as specified and directed. 62 Supply and fixing, in repair PVC (SWR) , bendswith access door any radius110 mm bore , complete all as specified and directed. 63 Supply and fixing, in repair PVC(SWR), junction single,(single T) with access door equal or unequal for 110 mm bore , complete all as specified and directed. 64 Supply and fixing, in repair PVC(SWR), junction single,(single T) with access door equal or unequal for 75 mm bore , complete all as specified and directed. 65 Supply and fixing, in repair PVC (SWR) P’ trap for 110mm bore including dismantling of exixting trap, complete all as specified and directed. 66 Supply and fixing in repair PVC (SWR) floor trap 75 mm dia plain with CPgrating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 67 M& L cement concrete as in sunken floor ,mass concrete type C-2 1:3:6 40 mgraded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified and directed. 68 M&L 25mm thick cement concrete type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course including demolition of existing PCC of any description complete all as specified and directed. 69 Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finishsing PCC 1:2:4 or cement plaster 1:4 without any extra cost to Govt ), complete all as specified and directed. 70 Material & labourfactory made steel windows double shutter box type, outer frame made out of ERW TUBE P section (60x45x25mm) and shutters of ERW TUBE P section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of Z sectionwith 10mm squar guardbarsdevetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3all as specified and directed by Engr-in-Charge.NOTE: The quoted rate against the above item shall also include (i) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (ii) PCC block for embedding lugswith andincluding taking down old existing window and making goodjambs sofits and cills of opening with 15mm thick cement mortar 1:4 and fixing of holdfast with PCC 1:3:6 where ever required 71 S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 72 S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed. 73 Supply and fixing 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 74 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats 75 M&L Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified, complete all as specified and directed. 76 M&L Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionseighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. 77 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 78 S&F in repairs Stainless steel gradewire cloth 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 79 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls,complete all as specified and directed. 80 Factory made solid panel PVC door shutter Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 81 M &L Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. 82 S&F Sheet glass 3mm th ordinary quality , n.exc 0.50 sqmfixed to metal frame with oil putty or wooden beading / fixed in Aluminium frame as per requirement in each pane complete all as specified and directed. 83 S&Fin repair 20mm outer dia plainchromium plated (SS Finish) decorative drapery rod of thickness 20 gauge and including side end cap with stainlessbrackets near to ends with stainless steel finish for at both ends. complete all as specified and directed. 84 S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. 85 Supply and fixing in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 86 S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed. 87 S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . complete all as specified and directed. 88 S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30x36x10) fixed with steel fastners or steel screw complete all as specified and directed. 89 S&F in repair Health faucet (ABS Body )mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter ling flexible tube and ABS wall hook including making connections and fixing in position complete all as specified and directed. 90 S&F Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section complete all as specified and directed. 91 S&F in Repair Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section complete all as specified and directed. 92 S&F Aluminium handle 150 mm long cast type anodised,complete all as specified and directed. 93 S&F fixed in repairs Aluminium handle 150 mm long cast type anodised,complete all as specified and directed. 94 S&Ffixed in repairs 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. 95 S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. 96 S&F floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 80 mm complete all as specified and directed. 97 S&F Butt hinges 100 mm extruded alu minium alloy with galvanisedmild steel hinge pin, anodised and fixedcomplete all as specified and directed. 98 S&F in repairsDoor Sealcomplete all as specified and directed. 99 S&F 300mm, MS ordinarydoor springplate type incl roller and roller platecomplete all as specified and directed. 100 S&F in repairs 300mm, MS ordinarydoor springplate type incl roller and roller platecomplete all as specified and directed. 101 M&L Two coats of synthetic enamal paint over a coat of pink primer on wood/wood based surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed. 102 M&L for preparation of new or previouslyuntreatedsurface of steelor ironsurfaces of any descriptionover 10cm width or grithand applyingtwo coatsof synthetic enamel paintover a coat of red oxideprimercomplete all as specified and directed. 103 S&F factory made 16 mm ((+) or (-) 1 mm)thick HDHMR high density board as cupboard shutter /shelvescomplete as per manufacturersinstructionindividual member will be measured for payment purposecomplete all as specified and directed. 104 S&F 30 / 40 mm flaps width continuous (paino) hingesmild steel brass bright finished or electro galvanised, complete all as specified and directed. 105 Material and labourPCC 1:3:6 type B-0using 12.5 mmgraded crushed stone aggregate as in hold fast /back filling of chowkhatcomplete all as specified and directed. 106 Brick work with subclass B bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 including Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified and directed. 107 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and directed. 108 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and directed. 109 Material and labour Non - skid / Anti skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including15 mm thick screed bed in CM 1:4. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed. 110 S&F in repair Rotational moulded polye- thylene water storage tanksof capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessary connections all as specified in SSR Part I ,including dismantling of existingwater tank in any type and position complete all as specified and directed. 111 S&F in repair Rotational moulded polye- thylene water storage tanksof capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessary connections all as specified in SSR Part I,including dismantling of existingwater tank in any type and position complete all as specified and directed. 112 S&F in repair 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms)complete all as specified and directed. 113 S&F in repair 25 mm CPVC Tank Adaptor for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms25mm- 65gms, complete all as specified and directed. 114 Disconnecting of existing water tanks exc. 250 Ltrs but not exc 500 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc, complete all as specified and directed. 115 Disconnecting of existing water tanks exc. 500 Ltrs but not exc 1000 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc, complete all as specified and directed. 116 S&F in Towel Ring of PTMT (CP finish) fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed. 117 S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms)® Complete all as specified and directed., 118 S&F in repair 40 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms)® Complete all as specified and directed., 119 S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. waste coupling and waste pipe of 32 mm dia (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe Complete all as specified and directed., 120 M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 Including Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified and directed. 121 M&L Rendering 15 mm thick on fair faces of brick or concrete surface wallsin cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and directed.
