Tender For Coil Fencing And Repairing Of Boundary Wall In Sector Sigma-(I,Ii,Iii,Iv), Greater Noida.- Demolishing R.C.C. Work Manually/ By Mechanical Means Includingstackingofsteelbarsanddisposalof Unserviceable Material Within 50 Metres Lead As Per Direc, noida-Uttar Pradesh

Tender For Coil Fencing And Repairing Of Boundary Wall In Sector Sigma-(I,Ii,Iii,Iv), Greater Noida.- Demolishing R.C.C. work manually/ by mechanical means includingstackingofsteelbarsanddisposalof unserviceable material within 50 metres lead as per direction of Engineer-in- charge. (DAR-18/15.3) 3 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR) 4 RCCGradeM25usingbatchingplanttransitmixer& manual placing. (MORTH-9.06 E/Case-II) 5 Steel reinforcement for R.C.C. work including straightening,cutting,bending, placinginpositionand bindingallcompleteuptoplinthlevel.Thermo-Mechanically Treated bars of grade Fe-500D or more. (Sail Steel) (DSR-18/5.22.6) 6 Providing andfixing concertinacoil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (totallength90M),having50nosroundsper6metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4M or 3.00 m apart and with 9 horizontalR.B.T.reinforcedbarbedwire,studtiedwithG.I.staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per directionofEngineer-in-charge,withreinforced barbed tape(R.B.T.)/ Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). (DSR-18/16.53) 7 Washed stone grit plaster on exterior walls height upto 10 metreabovegroundlevel,intwolayers,underlayer12 mmcementplaster1:4(1cement:4coarsesand), furrowingtheunderlayerwithscratchingtool,applying cementslurryon theunderlayer@2Kg ofcementper square metre, top layer 15 mm cement plaster 1:1/2:2 (1) cement: 1/2 coarse sand 2 stone chipping 10 mm nominal size),inpanelswithgrooveallaroundasperapproved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete as per specification and direction of Engineer-in- charge(paymentforprovidinggroovesshallbemade separately). (DSR-18/13.72) 8 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: (DSR-18/13.73) 9 15mm wide and 15mm deep groove (DSR-18/13.73.1) 10 M-150 brick work in 1:4 one cement and four coarse sand2.20F.M.mortarin foundation and pilnth includingsupplyofallmaterials,labour, T&P etc. required for proper completion of the work.But in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. but for walls of half brick thick, add extra labour to the rate of item no. SOR - 309 11 12 MM Cement plaster mix: 1:4 (1 cement :4 coarse sand. ( DSR-18/13.4.1) 12 Labour Cess and GST will be paid extra as per govt. orders

INR 1690 /-

INR 101000.0 /-

INR 50.16 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB