Tender For Construction Of Boundary Wall, Guard Room And Toilet In Park Sector Zeta-I, Greater Noida. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.(DSR-18/15.7.4/AR) 3 In cement mortar 4 Excavation in foundation in ordinary soil(Loam,Clay or sand) including lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30m from the foundation trenches.(UPPWD/SOR-2020/259(A) 5 Depth frm 0.00 to 1.5 M below G.L 6 Cement concrete with 4cm gauge approved stone ballast,coarse sand & cement in the proportion of 8:4:1 including supply of all material,labour,tools & plants etc.(UPPWD/SOR-2020/281) 7 Plain/ Reinforced cement concrete in sub structure complete as per drawing and R.C.C Grade M-25 using batching plant transit mixture & Concrete Pump.(DAR-13/5.3/P-96) 8 M-150 brick work in 1:4 one cement or four coarse sand 2.20 F.M mortar in foundation and plinth including supply of all material,Labour,T&P etc.(UPPWD/SOR-2020/305(a) 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.( DAR-2018/5.22.6) 10 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 11 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works(DAR-18/10.25.2) 12 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 13 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(UPPWD/SOR-2020/279(a) 14 12 mm cement plaster of mix : 15 1:6 (1 cement: 6 coarse sand)(DSR-18/13.4.2/AR) 16 Providing wall putty on old surface with approved quality material of berger/J.K/Birla or similar make two coats SOR 2020 662 17 Finishing walls with water proofing cement paint of required shade : 18 New work (Two or more coats applied @ 3.84 kg/10 sqm)(DSR-18/13.44.1/AR) 19 Part-2 20 Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. (Where machine can not reach/move). For Building work only . ( As per item sor no. 251) 21 Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.( As per item sor no. 281) 22 M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. 23 Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar.SOR 305a) 24 Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 25 Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast. (SOR 279a) 26 M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. 27 Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar. (SOR 305a) 28 As in item 303 to 307 above but in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. (SOR 309) 29 M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. 30 As in item 303 to 307 above but in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. (SOR 309) 31 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. SOR 310 32 Case II RCC Grade M20using batching plant transitmixer & manual placing. Morth-20/15.11/ p-653 33 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level 34 Thermo-Mechanically Treated bars of grade Fe-500D or more.(DAR18/5.22.6) 35 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)(DAR18/13.4.2) 36 15 mm cement plaster on rough side of single or half brick wall ofmix 37 1:6 (1 cement: 6 coarse sand) 38 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.(DAR-18/11.49.2/P- ) 39 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(DAR-18/11.36/P- ) 40 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters andalso including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour,Tools & plants etc.required for proper completion of the work. SOR 649 41 Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. NEW ITEM CH. 8 42 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DAR-18/12.41.2/P- ) 43 110 mm diameter 44 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. (DAR-18/17.37.1/P- ) 45 For 100 mm dia pipe 46 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-109.SOR 644 47 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(DAR-18/10.25.2/P- ) 48 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 49 Providing and fixing brass bib cock of approved quality : (DAR-18/18.15.1/P- ) 50 15 mm nominal bore 51 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(DAR-18/18.48/P- ) 52 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :(DAR-18/17.7.1/P- ) 53 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 54 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.(DAR-18/17.28.2.1/P- ) 55 Flexible pipe 56 32 mm dia 57 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (DAR-18/17.1.1/P- ) 58 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 59 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore(DAR-18/18.53.1/P- ) 60 15mm nominal bore 61 Providing and fixing uplasticised PVC connection pipe with brass unions : (DAR-18/18.21.2.1/P- ) 62 45 cm length 63 15 mm nominal bore 64 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DAR-18/9.20.2/P- ) 65 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 66 Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. (Where machine can not reach/move). For Building work only . ( As per item sor no. 251) 67 Supply of ISI market RCC NP-2 pipes of following size including carting loading unloading atgodown including all taxes and levies & rubber rings. 68 250 mm.NP-2dia. RCCPipes 69 Laying of NP-2 RCC S&S pipes jointed with stiff mixture of cement mortar in the propertion of 1:2 (1Cememt:2Coarse sand) including testing of jointed complete 70 250 mm.dia. RCCPipes 71 Providing and laying in position cement concrete 1:4:8 (1cement:4coarse sand:8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of folling diameter including centring shuttering but excluding excavation. 72 250 mm.NP-3 dia. RCCPipes 73 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : (DAR-18/18.33.1/P- ) 74 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 75 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 76 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)(DAR18 /19.9.1.1) 77 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 78 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete (DAR 18/19.34.2) 79 150 mm dia 80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 81 15 mm nominal outer dia Pipes(DAR18/18.7.1) 82 20 mm nominal outer dia Pipes(DAR18/18.7.2) 83 Providing and Laying, jointing and testing of following dia rigid pvc pipe of 6KG/CM2 working presser (finolex or equivalent make rigid PVC pipes as per IS 4485:2000) including all fittings & specials, jointing material etc. for proper completion of the work. 84 90mm dia O.D.(Finolex ring fit ) 85 110mm dia O.D.(Finolex ring fit ) 86 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively 87 dar18/17.23 88 Labour Cess and GST will be paid extra as per govt. orders
