Tender For Construction Of Cement Concrete Bandhara At- Kasgaon Tal Ambarnath Dist Thane
Tender Value
11.26 Lakhs
Estimated cost
Bid Submission
29 Jul 2025
0 days left
EMD
11300
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ambarnath → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cement Concrete Bandhara At- Kasgaon Tal Ambarnath Dist Thane
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and removing grass , bushes and shrubs etc.Stacking the stuffswith all leads and lifts. |
| 2 | Providing casing embankment using selected pervious material from approved borrow areas ( Government acquired land)inlayers of including cost of all materials, machinery, labour, all other operations such as collection of soil, spreadingsoil layer of specified thickness, sorting out, breaking clods,leveling, sectioning edges/ sides, watering, compacting each layer to density contorl of not less than 95 percent or as stipulated using vibratory compactor including cost of water etc., complete with lead up to 1 Km and all lifts as directed. |
| 3 | Dismatling the stone masnory in cement morter including stacking the material with all lifts etc . Complete as directed |
| 4 | Excavation in hard rockof all toughness by blasting including boulders above 0.6 m dia (0.113cum) minimizing damage to side slopes of excavation n water prism area by adopting any one or combination of line drilling / pre - spillting / smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour , leveling bed etc,.complete with lead up to 15 m an dall lifts as directed. |
| 5 | Providing drilling holes for anchor bars etc complete with all leads and lifts . i |
| 6 | Providing, fabricating and placing in position reinforcement steel for RCC works including cuttin, bending, hooking, laying in position and tying M.S./ HYSD / TMT / bars for reinforcement of R.C.C. work as per detailed drawing etc. complete as directed. |
| 7 | Providing & fixing in position M.S. side channels of size 150 x 100 x 100 mm for fixing M.S. Nededles of K.T. Bandhara as per detailed drawing and design including hold fast of 12 mm diameter M.S.Bars as per specification including oil paint in two coats with additional anticorrosive paint with all laeds and lifts etc. complete. |
| 8 | Straight Needle K.T . Weir Gate Manufacturing- Manufacuring with QAP & fabrication of KT weir needle gates - striaght type size 2.15 x 0.5M - 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & welding electrodes AWS E6013 for general weld joints. It includes all materials, Lobour charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 9 | Providing and laying in situ C.C. of grade M-15of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 10 | Providing and laying in situ C.C. of grade M-15of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requring heavy or special type o fshuttering for works of gallery, sluice , spillway creast, spillway downstream face, energy dissipating structures, intake structuires, training walls, piers, abutments etc. with Concrete mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 11 | Disposing unwanted excavated material upto 1.00km from site of work etc complete. |
| 12 | Providing and fixing 90 cmx 60 cm Granite plateengraving 10 cm . Height letter, figures including painting the letters/ figures with approved colours and shades etc complete. |
| 13 | Testing charges |
| 14 | Royalty Charges |
AI Tender Summary
Tender Timeline
Jul 21, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender