|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm with depth n exc. 50 mm but not exc 100 mm deep and cleaning surfaces incl removal of material up to a distance exc 50 mtrs and depositing serviceable materials complete all as specified and directed. |
| 2 | M&L forPremix bituminous, macadam with 4% binder content (using paving bitumen)by weight of total mix laid,rolled andcompaced to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. |
| 3 | Preparing ofold black topsurface by wire brushes for removing caked, mud etc sweepiing with brooms and finally fanning the cleaning surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 4 | M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 Kg/ Sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surface complete all as specified and directed. |
| 5 | M&L forBituminous premix asphaltic semi dense concrete 40 mm thickconsolidted thickness with 5.5% binder paving bitumen any penetration content by weight by total mix, rolled and compacted to required camber and gradient using mechanical self propelled paver and rolled with Mechanical vibratory power roller 8 to 12 tones capacity complete all as specified and directed. |
| 6 | S&F for cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all including dismantling of old road furniture complete all as specified and directed.Make : DARK EYE, Model : DA 978 / OSCAR, Model No : OS 776. |
| 7 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 8 | M&L for repair to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying evenly a priming tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in screened & graded road metal and rolled with Vibromix/Tandam 10-12 tonne power, watering and well ramming (including supply of road metal), complete all as specified and directed. |
| 9 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with mechanical brooms and remove all loose dust etc with air compressor having black top surfaces and applying evenly a priming/tack coat withcold emulsion RS-1 for Appling evenly a priminng@ 5Kg per 10 Sqm on bituminous surfaces complete all as specified and directed. |
| 10 | Demolitionof stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 11 | M&L for 100mm thick cement concrete 1:4:8type D-2 using (40mm graded stone aggregate) for sub base complete all as specified and directed. |
| 12 | M&L for machine pressed precast concrete interlocking paver block glossy finish, any shape & size with grey cement & pigment confirming to IS 15658-2006 of 60 mm thickness M-35grade, complete all as specified and directed.Make:- Kansal/Coral/Ultra/ hindustan.Notes:- (a) The make, colour shade, size & pattern of paver blocks shall be as approved by GE in writing before procurement.(b) Blocks shall be laid from one end keeping gap of 1 to 2 mm between blocks and the gap shall be filled with sand all as directed by Engr-in- Charge. |
| 13 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 14 | S&F in repair reflective road studs of size 100x120x20mm (minium weight 130 gms) most effective night guidance even under the most adverse weather conditions. Top quality, dynamically designed studs having excellent quality standards, can bear load upto 25 tonnes. The studs are visible and can also be heard and felt, due to the rumble when a vehicle crosses over them. Roads studs in different colour to delineate both the carriage way at the center and at the edges of roads made out of in rigid ABS plastic. The special material composition in ables the studs to bear severe impacts. The specific reflective panel of studs provides very high reflectively including epoxy complete all as specified and directed.Make : Road star/Sinor/STC/3M/Suneyez/Darkeye |
| 15 | S&F in repair solar studs of size 125x125x25mm made from aluminium alloy and construction. Solar powered by nanocrystal solar panel, type of battery rechargeable minimum 2.5V, 500MAH, LED both sides (3 each side) display colour red, visual distance approx 800 mtr in working temperature (10 degree to 70 degree centrigrade) with starting intensity 300 Lux to 600 Lux. Minimum approx weight 900 gms, water resistance made up high compressive material can sustain over 10 tonnes with one year replacement warranty complete all as specified and directed.Make : Road Star/Sinor/STC/Kohinoor/3M/Suneyes /Dark eye |
| 16 | S&F for 75mm dia 900mm over all length powder coated metal tubular delinator, duly pasted with three coloured high intensity prismatic reflective tape. Embedded in PCC Block of size 30x30x30cmin cement concrete 1:2:4 using 20mm stone graded aggregate including necessary form work and earth work complete all as specified and directed.Make : Road Star/Sinor/STC/Kohinoor/3M/Suneyes /Dark eye |
| 17 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
