|
| 1 | Box cutting or filling in Road embankment in all sorts of soil including sperading …...when and where necessary. (a) Depth up to 150 mm. P-237(road), l.No.3.16(a) |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm.... (Payment to be made on measurement of finished quantity) p-2 , sl.no- 4/A. |
| 3 | Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled ... layers when more than one layer is used) completes as per direction.(a) Single brick flat soling (thickness 75 mm.) Page-226, Item.No.1 |
| 4 | Hire and labour charges for shuttering with centreing and necessary staging... of works. (upto roof of ground floor).P-27, Sl.No.12(f) |
| 5 | Nominal Mix (3:1.5:1 Cement concrete with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor. a) Pakur Variety P-26, Sl.No.10 |
| 6 | Panel shutters of door and wind ow, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(a) ordinary teak wood P-117, Sl.No.1 |
| 7 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick P-205, Sl.No.-1 |
| 8 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) ….using cement @1.75 kg./sq.m. all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement.(iii)35 mm. thick P-48, Sl.No.6 |
| 9 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 10 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. P-105, Sl.No.15 |
| 11 | Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15….. horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. P-115, Sl.No.4 |
| 12 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC DoorShutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost…….. PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor P-125, Sl.No.15 |
| 13 | GST |
| 14 | Cess |
