Power Government Departments Closing in 0 days TDR #50268878

Tender For Procurement Of Spares For 36 Inch Gravimetric Coal Feeder And Other Miscellaneous Spares Of 10E10 Coal Mill Under Bm Dept. At Bktps.

Issued by Government Departments · bakreswar, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2025
0 days left
EMD
33582
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
bakreswar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Procurement Of Spares For 36 Inch Gravimetric Coal Feeder And Other Miscellaneous Spares Of 10E10 Coal Mill Under Bm Dept. At Bktps. , Housing For Bearing Of Inlet Span Roller Additional Data: Drg No.: Mkb/Bktpp/103 , Roller Bearing Housing Of Load Cell For Coal Feeder Gravimetric 36 As Per Sketch No-Wbpdcl/Bktpp/Bm/70 , Inlet Span Roller # # For Coal Feeder 36 Grv Additional Data: As Per Sample. , Driving Roller Pin With Nut,Washer,Bush For 36 Gravimetric Coal Feeder As Per Sketch No.- Wbpdcl/ Bktpp/Bm/203 , Roller,Weigh Span,For Coal Feeder # Additional Data: As Per Fig-1 , Housing,Nde Bearing ,Driving Shaft Of 36 Gravimetric Raw Coal Feeder Additional Data: Drg No- Mkb/Bktpp/106 , Guide Tube Od60mmxid26mmx145mm L $For Ball Mill 10E10 Material: Ms , Operating Nut For Ball Mill As Per Sketch No.-Wbpdcl/Bktpp/Bm/77 , Gearbox To Driving Pulley Coupling Additional Data: Of 36 Gravimetric Coal Feeder As Per Sketch No:Wbpdcl/Bktpp/Bm/193 , Belt Scrapper Rubber Pad For Coal Feeder Gravimetric 36 As Per Sketch No.-Wbpdcl/Bktpp/Bm/173 , Upper Side Clamp For Push Rod Bellow For Mill Loading System Upper Side Clamp For Push Rod Bellow ( Size: 178Mm When Fully Compressed) , Lower Side Clamp For Ball Mill 10E10 Size: 196Mm When Fully Compressed , Swivel For Ball Mill 10E10 As Per Sketch No.-Wbpdcl/Bktpp/Bm/174 ; Material-En-9,Flame Hardened , Bearing Assembly As Per Sketch No.-Wbpdcl/Bktpp/Bm/42# For Coal Feeder Inlet Knife Gate , Locking Plate Of Friction Grip Ht Bolt For Ball Mill 10E10 As Per Sketch Wbpdcl/Bktpp/Bm/138 , Seat Ring Material:Ss-304 As Per Sketch No.-Wbpdcl/Bktpp/Bm/102# For I/L Knife Gate For Ball Mill 10E10 , Oil Seal,Tc 20X35x7-22Nok , Push Rod Assly For Ball Mill 10E10 Additional Data: As Per Sample. , Screw, Soc Hd Cap,M12x60, Ft,Gr 10.9,Ht As Per Is:2269,Din 912,Iso 4762, Thread: Iso Metric (Coarse) 6G As Per Is:4218, Material: High Grd Alloy Steel-Property Class-10.9 As Per Is: 1367, Full Thread , Bolt With Nut For Ball Mill 10E10 As Per Sketch No.-Wbpdcl/Bktpp/Bm/62

BOQ

Name of Work: Procurement of Spares for 36\" Gravimetric Coal Feeder and other Miscellaneous Spares of 10E10 Coal Mill under BM dept. at BkTPS.
Sl. No. Item Description
1HOUSING FOR BEARING OF INLET SPAN ROLLERAdditional Data:DRG NO.: MKB/BKTPP/103
2ROLLER BEARING HOUSING OF LOAD CELL FOR COAL FEEDER GRAVIMETRIC 36\"AS PER SKETCH NO-WBPDCL/BKTPP/BM/70
3INLET SPAN ROLLER ## FOR COAL FEEDER 36\" GRVAdditional Data:AS PER SAMPLE.
4DRIVING ROLLER PIN WITH NUT,WASHER,BUSH FOR36\" GRAVIMETRIC COAL FEEDERAS PER SKETCH NO.- WBPDCL/ BKTPP/BM/203
5ROLLER,WEIGH SPAN,FOR COAL FEEDER #Additional Data:AS PER FIG-1
6Housing,NDE bearing ,driving shaftof 36\" gravimetric raw coal feederAdditional Data:DRG NO- MKB/BKTPP/106
7GUIDE TUBE OD60MMXID26MMX145MM L $FOR BALLMILL 10E10MATERIAL: MS
8OPERATING NUT FOR BALL MILLAS PER SKETCH NO.-WBPDCL/BKTPP/BM/77
9GEARBOX TO DRIVING PULLEY COUPLINGAdditional Data:OF 36\" GRAVIMETRIC COAL FEEDER AS PER SKETCHNO:WBPDCL/BKTPP/BM/193
10BELT SCRAPPER RUBBER PAD FOR COAL FEEDERGRAVIMETRIC 36\"AS PER SKETCH NO.-WBPDCL/BKTPP/BM/173
11UPPER SIDE CLAMP FOR PUSH ROD BELLOW FOR MILLLOADING SYSTEM UPPER SIDE CLAMP FOR PUSH ROD BELLOW ( SIZE: 178MM WHEN FULLY COMPRESSED)
12LOWER SIDE CLAMP FOR BALL MILL 10E10SIZE: 196MM WHEN FULLY COMPRESSED
13SWIVEL FOR BALL MILL 10E10AS PER SKETCH NO.-WBPDCL/BKTPP/BM/174 ;MATERIAL-EN-9,FLAME HARDENED
14BEARING ASSEMBLYAS PER SKETCH NO.-WBPDCL/BKTPP/BM/42# FOR COAL FEEDER INLET KNIFE GATE
15LOCKING PLATE OF FRICTION GRIP HT BOLT FORBALL MILL 10E10AS PER SKETCH WBPDCL/BKTPP/BM/138
16SEAT RING MATERIAL:SS-304AS PER SKETCH NO.-WBPDCL/BKTPP/BM/102# FOR I/LKNIFE GATE FOR BALL MILL 10E10
17OIL SEAL,TC 20X35X7-22NOK
18PUSH ROD ASSLY FOR BALL MILL 10E10Additional Data:AS PER SAMPLE.
19SCREW, SOC HD CAP,M12X60, FT,GR 10.9,HTAS PER IS:2269,DIN 912,ISO 4762, THREAD: ISO METRIC (COARSE) 6g AS PER IS:4218, MATERIAL: HIGH GRDALLOY STEEL-PROPERTY CLASS-10.9 AS PER IS: 1367, FULL THREAD
20BOLT WITH NUT FOR BALL MILL 10E10AS PER SKETCH NO.-WBPDCL/BKTPP/BM/62

AI Tender Summary

OUR REF NO 50268878
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 11-08-2025
Authority
Authority Name West Bengal Power Development Corporation Limited
Work Description Procurement Of Spares For 36 Inch Gravimetric Coal Feeder And Other Miscellaneous Spares Of 10E10 Coal Mill Under Bm Dept. At Bktps. , Housing For Bearing Of Inlet Span Roller Additional Data: Drg No.: Mkb/Bktpp/103 , Roller Bearing Housing Of Load Cell For Coal Feeder Gravimetric 36 As Per Sketch No-Wbpdcl/Bktpp/Bm/70 , Inlet Span Roller # # For Coal Feeder 36 Grv Additional Data: As Per Sample. , Driving Roller Pin With Nut,Washer,Bush For 36 Gravimetric Coal Feeder As Per Sketch No.- Wbpdcl/ Bktpp/Bm/203 , Roller,Weigh Span,For Coal Feeder # Additional Data: As Per Fig-1 , Housing,Nde Bearing ,Driving Shaft Of 36 Gravimetric Raw Coal Feeder Additional Data: Drg No- Mkb/Bktpp/106 , Guide Tube Od60mmxid26mmx145mm L $For Ball Mill 10E10 Material: Ms , Operating Nut For Ball Mill As Per Sketch No.-Wbpdcl/Bktpp/Bm/77 , Gearbox To Driving Pulley Coupling Additional Data: Of 36 Gravimetric Coal Feeder As Per Sketch No:Wbpdcl/Bktpp/Bm/193 , Belt Scrapper Rubber Pad For Coal Feeder Gravimetric 36 As Per Sketch No.-Wbpdcl/Bktpp/Bm/173 , Upper Side Clamp For Push Rod Bellow For Mill Loading System Upper Side Clamp For Push Rod Bellow ( Size: 178Mm When Fully Compressed) , Lower Side Clamp For Ball Mill 10E10 Size: 196Mm When Fully Compressed , Swivel For Ball Mill 10E10 As Per Sketch No.-Wbpdcl/Bktpp/Bm/174 ; Material-En-9,Flame Hardened , Bearing Assembly As Per Sketch No.-Wbpdcl/Bktpp/Bm/42# For Coal Feeder Inlet Knife Gate , Locking Plate Of Friction Grip Ht Bolt For Ball Mill 10E10 As Per Sketch Wbpdcl/Bktpp/Bm/138 , Seat Ring Material:Ss-304 As Per Sketch No.-Wbpdcl/Bktpp/Bm/102# For I/L Knife Gate For Ball Mill 10E10 , Oil Seal,Tc 20X35x7-22Nok , Push Rod Assly For Ball Mill 10E10 Additional Data: As Per Sample. , Screw, Soc Hd Cap,M12x60, Ft,Gr 10.9,Ht As Per Is:2269,Din 912,Iso 4762, Thread: Iso Metric (Coarse) 6G As Per Is:4218, Material: High Grd Alloy Steel-Property Class-10.9 As Per Is: 1367, Full Thread , Bolt With Nut For Ball Mill 10E10 As Per Sketch No.-Wbpdcl/Bktpp/Bm/62
Basic Detail
Tender No WBPDCL/BkTPS/OT/E3788/25-26
Bidding Type Tender
Location
City bakreswar
State West Bengal
Key Dates
Publish Date 21 Jul 2025
Submission Date 11 Aug 2025
Open Date 13 Aug 2025
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 33582
Exemption Available
Document List
ad600e0b-3004-4b39-a7f6-1d7a8c6997ad.html
BOQ_1972221.xls
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 21, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 11, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 13, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ad600e0b-3004-4b39-a7f6-1d7a8c6997ad.html

xls

BOQ_1972221.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders