|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. P-11, Sl.No.10 |
| 2 | Brick work with 1st class bricks in cement mortar (1:6)(6:1) in ground floora) In ground floor Page-15 Sl.No.8/a |
| 3 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor.a) In ground floor Page-16 Sl.No.16 |
| 4 | Supplying,hosting,fitting and fixing R.C.C. precast thin lintels, 75 mm. thick (1:2:4) conforming to the specification laid down in C.B.R.I. data sheet No.1 with stone chips, sand, cement and reinforcement (both main and distribution) bars upto 1.00 percent as per drawing and specification including placing in situ and supporting arrangement for taking the load of super-imposed brick work and striking of the same when directed. (ii) Other than TATA/SAIL/RINL. P-42, Sl.No.34/II |
| 5 | Plaster (to wall, floor, ceiling etc)with sand & cement mortar including rounding off or cham- fering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing & drip course where necessary (I)20mm thick plasterwith 6:1 cement mortar Page-189, Sl.No.1/i/b |
| 6 | (I)15mm thick plasterwith 6:1 cement mortar Page-189, Sl.No.1/ii/b |
| 7 | (I)10mm thick plasterwith 4:1 cement mortar Page-189, Sl.No.1/ii/c |
| 8 | Neat cement punning 1.5mmthick in wall, dado, window, sills, floor,drain etc.P-192, Sl.No.15 |
| 9 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete A) UPVC Pipes (ii) 110 mm. Dia. |
| 10 | a) Plain Tee(ii) 110 mm. Dia. P-212, Sl.No.21 |
| 11 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works,using cement @1.75 kg./sq.m. all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement.(iii)35 mm. thick P-48, Sl.No.6 |
| 12 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer(b) 1500 litre capacity P-37, Sl.No.6S&P. |
| 13 | Labour for hoisting plastic water storage tank.(ii) Above 1500 litre upto 5000 litre capacity.(a) Upto 1st story from G.L. P-37, Sl.No.10S&P. |
| 14 | Labour for punching hole in plastic water storage tank upto 50 mm dia. P-38, Sl.No.13S&P. |
| 15 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (ii) 15 mm dia. medium quality |
| 16 | (ii) 20 mm dia. medium quality |
| 17 | (ii) 25 mm dia. medium quality,P-2, Sl.No.1,A,B,C,S&P. |
| 18 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (viii) 20 mm dia P-5, Sl.No.5S&P. |
| 19 | Supplying, fitting and fixing gunmetal wheel valve of approved brand andmake tested to 21 kg per sq. cm. (for water lines only). (viii) 20 mm dia P-5, Sl.No.5S&P. |
| 20 | Supplying & Fixing of 1HP self priming pump Make KSB, peribloc-1 |
| 21 | (b) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. Page-200, Sl.No.1/b |
| 22 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)Page-200, Sl.No.2 |
| 23 | GST |
| 24 | Cess |
