Tender For Drilling Of New Borewell And Motor Pumpset At 6Th Ward Devaiyee Kalam,10Th Ward Pannakaranpatti And 8Th Ward Anniyapur Ramasamy Kalam In Palayam Town Panchayat.; 1 Geology survey charges etc 2 Drilling of 150 mm Dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labour charges etc 3 Upto 150m 4 From 151M -180M 5 From 181M -210M 6 From 211M -240M 7 Supply and fixing of 200mm dia PVC casing pipe including cost of materials and all labour charges etc., 8 Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % 9 3 H.P Three Phase Submecible Motor50 lpm x 200 m Head 10 2 H.P Single Phase Submecible Motor20 lpm x 150 m Head 11 Supply and delivery of Submecible Cable ,PVC Pipe, GI Pipe and PVC,GI specials including cost for materials and all labour charges forcompleted 12 Bore cover 13 Bore Kitty 14 32mm diaUPVC Column pipe 15 3 H.P.Three Phase Pannel board 16 2 H.P.Single Phase Pannel board 17 PVC Insulated and Sheathed 3core Flat Type 4 Sqmm Submersible Copper Cable 18 32 mm dia G.M Non return Valve 19 32 mm dia G.M Gate Valve 20 1000 Litre HDPE Tank ISI / ISO 21 20mm dia G.I.Coupling 22 20mm dia C.P.Tap 23 32mm dia G.I.Elbow 24 32mm dia G.I.Coupling 25 32mm dia G.I.Union 26 32mm dia G.I.HexNipple 27 32mm dia G.I.Bend 28 32mm dia G.I.Pipe 29 Adopter 30 Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 31 Upto 5 HP 32 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum 33 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 34 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification 35 Plastering walls with cement mortar 1:5 (One part ofcement and five part of M-sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete. 36 Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete 37 Supply and fixing of cudapah stone slab 50mm thicknees for cupboard arrangement including polishing etc., complete and as directed by departmental officers 38 Painting the new walls two coats over one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers 39 Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc complying with standard specification 40 Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1 x 1/8 copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD No.129) 41 Supply and fixing ofTNEB meter board suitable for 32A single phase service connection with 32A fuse uni (500V) 32A neutral link and earth link (1x1/8copperflat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EBmete to fuse unit with 1No 40 Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection (SD No.126) 42 Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains (SD No.67) 43 Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class B) suitably bent at both ends with necessary angle iron up right and end supports for mains (SD No.72)
