|
| 1 | Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.CAT-AAA |
| 2 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 16 sqmm 4 core |
| 3 | S&Fof 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. |
| 4 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.807 (B)25 A SPN |
| 5 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) |
| 6 | Supply and wiring of submains with 4 nos. 4 sq mm & with 1 no earth wire of 2 No. 2.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour andT & P etc. required for proper completion of the work as directed by Engineer in charge. |
| 7 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 8 | Supply and fixing of single unit neon aviation obstruction light (GEC-ZH750) / Bajaj BJAOL-1 complete withtransformer and neon spiral etc. at the top of the building complete in all respect.... |
| 9 | S/F of 16 mtr. High Mast shaft of approved make with rising system hot dip glavanized inside & outside dip, heaving pole sheet thickness 3mm. Top dia mimimum 150 mm. Bottom dia 360 mm. Base plate 35 mm. thick suitable for wind velocity as per IS 875 Part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 Point suspension system with steel wire rope 6mm. dia, double drum winch, including making suitable foundation as per manufacture drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc. complete in all respect. |
| 10 | supply of 150 Ltr Capacity Usha Make Model No. SS 150/150 with refrigerator R-22 having cooling capacity 150 Ltr with extra large stainless steel body with water tap 02 no. complete in all respects. |
| 11 | Supply of 4 KVA Stabilizor range 140-280 with plug top complete in all respects. |
| 12 | Installation and Commossioning charge of water cooler including connection complete in all respects App. |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm, having thermal stability for hot & cold water supply, complete in all respect. |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25 mm, having thermal stability for hot & cold water supply, complete in all respect. |
| 15 | Supply and Fixing of Brass stop cock of approved make complete in all respects. |
| 16 | Supply and Fixing of wash Pipe of 15 mm for wasage water drain from water cooler . |
| 17 | |Construction of 2.0 mtr.X1.5mtr. X10Mtr. cage made of 50mmx 50mm X 5mm angle Iron with10 HWG welded wire mesh of size 1\" X2\"Gavalinized GI sheet of 24 HWG on roof top and side to protect the coller from rain the foundation of cage shall be 0.15 m in 1:2:4 cemetn concerete bae and brick work. Work including labour material for proper completion of work. |
| 18 | Supply of hosting of sintax or equivalent high density polythylene seamless ofpoece mound tank complete in all respect. |
| 19 | Supply and fixing of power plug with 20 Amp./250 voltflush type modular switch and 5 pin 20 A/250 volt flush type universal modular socketswitch on concealed M.S boxincluding supply of all material, labour T&P etc. required for proper completion of work. |
| 20 | S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve |
| 21 | S&F of6 Amp. to 32Amp. DP MCB (10 KA) C Curve |
| 22 | S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site byEngineer in charge. |
| 23 | S/L of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer –Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.501(a) 6Sqmm 2core - |
| 24 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 25 | Supply and fixing of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on Angle Iron Bracket complete with all respects. |
| 26 | Supply of 1HP submersible pump set with starter UPIN 65m head (Pluga/Crompton Greeves /KSB) |
| 27 | Supply and fitting of 4sqmm 3 core copper wired cable (ISI mark) complete in all respect |
| 28 | Installation of 1.0 HP submersible motor pump with 32mm G.I. Lowering, submersible cable 4sqmm & installation of starter including supply of labpur, T&P etc complete in all respect Jal Nigam |
