Annual Maintenance Shut-Down Of Wheel Shop Equipments For 2025-26 (Maintenance Wheel Final Process Shop), Group-9 Cleaning Machine-2, Peening Machine 1&2, Wfps Conveyors., bangalore-Karnataka

Annual Maintenance shut-down of wheel shop Equipments for 2025-26 (Maintenance wheel final process shop), Group-9 cleaning machine-2, peening machine 1&2, WFPS conveyors.-1Gas cut & removal of guide rails, support angles & bottom rails at all the 3 chambers. (entry, blast and exit)3 Set 2Removal of work rotator shafts and bearings (drive and idler), ejector arm, shafts, bearings & cylinders.1 Unit 3Removal of all wear plates of blasting, exit and entry chamber & removal of inspection, entry and exit doors & cylinders.5 Unit 4Dismantling of three roto units & metering gate assembly.3 Unit 5Dismantling of bucket elevator belt assembly, top pulley, boot pulley & bearings.1 Unit 6Removal of scalping drum with screw conveyor, flange bearings, sprockets & chain.1 Set 7Repair / servicing and fitment of scalping drum with screw conveyor, new flange bearings, sprockets & new chain.1 Set 8Repair to roto chambers & replacement of damaged wear plates.3 Unit 9Repair of machine shell body (entry, blast & exit chamber)3 Unit 10Fitment of Main rails, guide rails & align with proper support of guide angles. (Rails to be fabricated with 25 mm manganese plate & guide angles fabricated by 10 mm manganese plate)3 set 11Fitment of wear plates of blasting, exit and entry chamber with proper bolting systems.03 Set 12Fitment of serviced roto units, serviced/new metering gate assembly and connect steel shots feeding hoses to metering gates & rotos with proper clamping.3 Unit 13Fabrication & fitment of steel shots feeding square & round tubes from screw conveyor to roto units. Fabrication & fitment of dust pipes from screw conveyor to ground / waste bin.3 Unit 14Fabrication & fitment of perforated sheets with 10 mm manganese plate with 10 mm drill/gas cutting holes & provide proper supports (entry, blast & exit chamber)3 Unit 15Fitment of ejector arm along with new shafts, bearings, serviced cylinders & hoses.1 Unit 16Fitment of work rotator drive and idler shaft with new bearings with proper alignment and provide cover wear plates. Fitment of Work Rotator gearbox sprocket & coupling with proper alignment.2 Unit 17Repairs to inspection, entry and exit doors, its sealing and replace new hinges & door lock handles. Replacement of entry & exit door i-beam, repair & fitment of serviced door & actuator cylinders & its accessories.5 Unit 18Repairs to damaged / worn out bottom hopper.01 No 19Fitment of roto, motor pulleys, new V-belts with after proper alignment, tensioning of drive belts & provide mesh cover for belt drive3 Unit 20Repair to damaged bucket elevator shell body. Replacement of bucket elevator rubber belt, damaged buckets, defective Gearbox, elevator top pulley, boot pulley, shaft and bearings.1 Unit 21Painting with one coat of apple green paint.1 Unit 22Testing and trial run of the machine with wheels and wheel movements from entry to exit.1 Unit 23Shifting of all removed scrap material to earmarked area2 MT. Rates are inclusive of GST.

Refer document

INR 47100.0 /-

INR 23.57 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB