Tender For Provision Of Certain Minor Works At Afs Amla; 1 Surface dressing in any type of soil n. exc 15 cm deep complete all as specified and as directed. 2 M&L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. (17+4) 3 M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring to receive tiles all as specified and as directed. 4 M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) over cement concrete complete all as specified and as directed. 5 M&L for paver tiles 8 to 12mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set, Jointed & pointed with neat cement slurry with white cement and matching with pigment complete all as specified and directed. 6 S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall/roof covering fixed with self tapping screw complete all as specified and directed. (150+60) 7 S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutters fixed with self tapping, screws complete all as specified and as directed. (12 +10) 8 Excavation in soft/loose soil for post holes (or similar holes) n. exc 0.5 cum getting out, removing surplus soil to a distance n. exc 50 m and making good surface in soft/loose soil complete all as specified and as directed. 9 M&L for PCC 1:3:6 type C2 (using 40mmgraded stone aggregate) as in foundation filling complete all as specified and as directed. 10 M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade st-240 complete all as specified and as directed. (320+970) 11 M&L for preparation of untreated new surfaces of steel and iron work exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat od red oxide zinc chrome primer complete all as specified and directed. (20+20+20) 12 M&L forpreoaration of old painted steel surfaces of any description not otherwise descriped over 10cm in width or girth and applying one coat of synthetic enamel paint including scaffolding where required for external painting complete all as specified and as directed. (50+20) 13 Excavation in trenches n. exc 1.5m wide & n. exc 1.5m in depth for foundation, for laying of cables etc. and getting out in soft/loose soil complete all as specified and as directed. (5+36) 14 M&L for PCC 1:3:6 type C2 (using 40mmgraded stone aggregate) as in surface channels and drains finished with extra cement smooth channel complete all as specified and directed. 15 Removing excavated material n exc. 50 m and depositing where directed at level not exc. 1.5 m above the starting point complete all as specified and as directed. (5+12+2) 16 M&L for 10mm thick rendering in cement mortar 1:4, on fair faces of beick work finished even and smooth without using extra cement complete all as specified and as directed. 17 M&Lfor 75 mm thick plain cement concrete, 1:3:6 type C1 (using 20mm graded aggregate) as in flooring top layers fair and even with expanded metal and spike rolling etc complete all as specified and as directed. 18 Excavation in trenches n. exc 1.5m wide & n. exc 1.5m in depth for foundation etc. and getting out in any type ofsoil complete all as specified and as directed. 19 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 20 S&F Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe. 410-w (Gde-E-250) quality-A complete all as specified and directed. 21 M&L for PCC 1:2:4 Type B1 (Using 20mm graded stone aggregate) as in plinth courses string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. (0.5+5) 22 M&L for Brickwork with fly ash, subclass B bricks, straight or curved on plan exc 6m meqan radius built in cement mortar 1:6 complete all as specified and directed. 23 M&L for rendering 15 mm thick in two layers, (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surfaces complete all as specified and directed. 24 M&L for preparing new surfaces of wall and applying two coat of plastic emulsion paint over a coat of perimer of plaster surfaces of any description over 10cm girth or width, not otherwise described with wall care putty including use of scaffolding complete all as specified and directed. 25 Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame)complete all as specified and directed. 26 Taking down chowkats or frames with shutter exceeding 1.5 Sqm and not eceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. 27 S&FSteel Ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. 28 S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed. 29 Supply and fix framed work such as grills, gratings, etc with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework if water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed. 30 M&L for steel door (double leaf) including box type hinges, steel handle, stopper complete with glazing bars, dovetailed or welded complete all as specified and directed. 31 S&F for Mild steel plain black sheet 1.60mm thick sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending ot turning up mitred angles, etc. as required complete all as specified and directed. 32 Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demoliion) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and sinilar suspended work complete all as specified and directed. 33 Demolition cement concrete (un reinforced) of any description fin ground floor n. exc. 15 c, thickness (below or above ground lavel) complete all as specified and directed. 34 M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. 35 M&L for sand filling (river) for floors or in foundations including watering and consolidation complete all as specified and directed 36 M&L for preparation of old painted steel surfaces of any described over 10 cm in width or girth and applying one coat of synthetic enamel paint including scaffolding where required for external painting complete all as specified and directed. 37 S&F glow sign boards(both sides) made (both sides) of retro reflective type high intensity prismatic grade sheet in single / twin colour fixed over aluminium sheet 1.5 mm thick in shape of irragular pentagon ( area exceeding 0.80 sqm but not exceeding 1.5sqm) content on board as directed, framed with 25 mm dia round pipe chromium plated stainless steel hollow section and fixed to stainless steel tubes of 40 mm medium grade (304) square / round pipe 2.4 mtr long including two nos stainless steel nuts and bolts on each side and embedded in below ground level including excavation , PCC M15 with using 20mm graded stone aggregate as in foundation of size 300mm x300mm x 450mm and making good surface complete all as specified and directed. 38 Taking down cement plaster any thicknessto walls, partitions, ceilings, etc, and include for all necessary lowering, etc., removal of rubbish off the premises, removal and depositingwhere directed complete all as specified and directed. 39 M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on internal surfaces to be finished even and smooth without using extra cement including grooving where directed complete all as specified and directed. 40 M & L for Wire netting of galvanised steel wire (chicken mesh) netting 0.91mm dia and 12mm mesh lathing to wood or metal studding, joists, etc.in walls, ceiling, stanchions, beams etc including all laps, cutting and waste, complete all as specified and directed. 41 M&L for preparing new surfaces of walls and applying three coats of white wash on the walls including use of scaffoldings complete all as specified and directed. 42 M&L for preparing old surfaces of walls and applying two coats of white wash on the walls including use of scaffoldings complete all as specified and directed. 43 M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS: 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI marked complete with onr run of PVC insulated unsheathed FRLS multistranded copper conductor cable 1.5 Sqmm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for Phase, neutral and earth wire as specified in MES SSR Part-I 1991 with provn of heavy duty PVC ganf boxes fixed on wooded block on wall for fixing of switches/socket/regulator with screws for one light/fan point controlled by one switch.complete all as specified and directed. 44 All as per item No 43 above but One 3 pin socket outlet 5 Amps on the same board with other switch complete all as specified and directed. 45 All as per item no 43 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and directed. 46 S&F switch piano flush button single pole one way 5 Amp complete all as specified and directed. 47 S&F ceiling rose surface bakelite 60x50mm 2 to 3 therminal complete all as specified and directed. 48 S&F socket outlet 2-in-1, 5 pin, 5 Amps flush type complete all as specified and directed. 49 S&F sheet metal enclosure distribution board SPN, 2 ways 240 volts, with IP 42 protection suitable for mounting MCBs all as specified and directed. 50 S&F MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed. 51 S&F LED light fitting 20W, 220V, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally pre wired and necessary mounting arrangements all as specified and directed. 52 S&F pedestal fan complete with blades, down rods, base assembly and accessories, 230 V, 450 mm sweep min air delivery 210 CFM with complete all as specified and directed. 53 Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 16 Sqmm 2 core laid in trenches or under road complete all as specified and directed. 54 Returning filling in excavated soil including spreading levelling and well ramming in layers not exceeding 25cm thick complete all as specified and directed. 55 Supply and laying HDPE DWC pipe size outer dia 63 mm, inner dia 50 mm for LT cable protection including sockets, bends etc complete all as specified and directed. 56 M&L for earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.00 mm thick buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized wire 4mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 25 mm bore (light grade) connected to machinery/equipment all as shown in electrical plate No 3 of SSR-2010 Part-I and including necessary excavation and earth work in any type of soil, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC (1:3:6) type C-1 chamber, CI Earthing Pit cover 300 x300 mm with angle iron 20 x 20 mm, 3 mm thick complete all as specified and directed.Note: (i) The unit rate includes earth lead and protection pipe upto maximum 7.5 metre from earth plate to earth point/test point.(ii) Earth pit shall be constructed minimum 0.5 metre away for earth. 57 Supply, install, commissioning and testing of split type wall mounted Air conditioner of capacity 1.5 TR (4500 K Cal/hr) single phase, (Non CFC/HCHC) suitable for 230 Volt +10%, 50 Hz, AC supply complete with cordless remote control unit, minimum BEE 3 star rating, EER of 3.2 and above complete comprising of following :-(a) Indoor unit copper coil with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising Compressor with motor, air cooled copper condenser with fan and motor and unit shall be installed out side the building/ on roof. 58 (c) Refrigerant copper pipe for suction and discharge line with foam insulation, condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) PCC (1 :2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth suitable for installation of outdoor unit or powder coated MS bracket fixed on wall as per manufacturers instruction with necessary grouting MS hold fastner, bolts, washers duly painted and making good to disturbed surfaces suitable for installing outdoor unit of 1.5 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer inclusive in quoted rate. 59 Supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of± 2.5% and of capacity 4 KVA complete all as specified. 60 S & F polycarbonate modular AC box, 4 module with modular 20 Amps single pole MCB, modular socket 16 Amp, enclosure and heavy duty ISI marked plug top (white) 16 Amp complete all as specified and directed. 61 M & L for concealed sub main wiring comprising of two single core 4 Sq mm nominal cross sectional area multistranded copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and including PVC conduits and conduit fittings complete (concealed type) and one single core 4 Sq mm nominal cross sectional area in green colour copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified and directed. 62 Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch A while deriving the Contract Sum for Acceptance.
