Replacement Of Very Old And Damaged Pump Set No-1 And 2 With All Allied Accessories At Pocket-52 Cr Park Bps In G.K. Constituency Ac-50, Delhi-Delhi

Replacement Of Very Old And Damaged Pump Set No-1 And 2 With All Allied Accessories At Pocket-52 Cr Park Bps In G.K. Constituency Ac-50. , Dismantling Of Old Pump Set After Disconnecting From Suction And Delivery Pipeline, Decoupling With Motor, Removing Of Electric Connections From Motor And From Lt Panel Etci/C Taking Out Old Pump From Existing System Etc., Closing Of Suction & Delivery Line With The Help Of Suitable Size Dead Flange. , Providingof Horizontal Split Casing Centrifugal Pump Suitable For Potable Water Having Flanged Suction & Delivery With Ci Impeller, Ci Body, S.S. Shaft & S.S. Sleevesuitable For Head 55-60 Mtr., Discharge 198 M3 /Hr., Suction & Delivery Size 150 X125 Mm, 1475 Rpm With Suitable For Prime Mover (Motor) Of Capacity 50 Hp. Make Of Pump:- Wilo Matter & Platt/Kbl /Ksb/Lubi/Jyoti/ Djb Approved Make. Providingof 50 Hp 1475 Rpmsquirrel Case Induction Motor Suitable To Operate On 430V,3 Phase,50 Hz, Horizontal Foot Mounted Confirming To Iec:60034-1. Make Of Motor- Abb/Kirloskar Electric Co./Ksb/Jyoti/Cg Power/Djb Approved. , Dismantling And Taking Out M S Base Frame From Cc Foundation After Cutting Of Nut Bolts, Breaking The Damaged Rcc Foundation Of The Old Pump Set By The Help Of Concrete Breaker And Labour. Also Taking Out Malba From The Pump House By Manual Labour & Dumping The Same As Per Directions. , Making A Rcc Foundation Of New Pump Set Of Material Ratio 1:1.5:3 (Cement, Coarse Sand And Graded Stone Aggregates) Concrete With Foundation/Rag Bolts As Per Site Requirement. Providing & Fixing Of M.S Base Frame Of Suitable Size With Nut Bolt & Washer Etc For Pump Sets As Per Site Requirement. , Providing & Fixing Of Suitable Size Coupling For Pump Set With Suitable Size Coupling Guard & Fixing With Nut Bolt & Washer Etc As Per Site Requirement. , Supply Of Pvc Insulated Single Core Flexible Copper Cable Of Size 50 Sq.Mmmake : Grandley / Gloster/Havells/Djb Approved , Laying And Connection Ofof 50 Sq.Mm Single Core Copper Cable From Lt Panel To Pump Set With Suitable Size Lugs, Nut Bolt & Washer Etc As Per Site Requirement And With Proper Dressing And Clamping. , Installation/Fixing Of New Pump Set On New Base Frame & Rcc Foundation And Fixing Of Sluice Valves, Nrvs, Etc And Making All Electrical Connections Of Motor.( Sluice Valve & Nrv Shall Be Provided By Department). , Providingof Suitable Sizems Gap Piece, Flange,Reducer, Nut Bolts And Washer, Rubber Packing Etc. Making Suction & Delivery Connections With Pump Set With The Help Of Ms Gap Piece, Flange, Suitable Size Reducer, Nut Bolts, Rubber Packing Etc As Per Site Requirement By Using Gas Cutter, Welding Set, Manual Labour Etc. , Testing & Commissioning Of Pump Set On No Load And On Full Load As Per The Complete Satisfaction Of The Engineer –In-Charge.

INR 500 /-

INR 29100.0 /-

Refer document