|
| 1 | ACETONE | AS per attached Technical Specifications |
| 2 | ACID RESISTANT HAND GLOVES | AS per attached Technical Specifications |
| 3 | ALUMINIUM THIMBLE 35 SQ MM | AS per attached Technical Specifications |
| 4 | ANABOND RTV 666, 100 GM TUBE | AS per attached Technical Specifications |
| 5 | ARALDITE 36GM | AS per attached Technical Specifications |
| 6 | BAKELITE SHEET 4x2 FOOT,2MM THICK | AS per attached Technical Specifications |
| 7 | BAKELITE SHEET 4x2 FOOT,3MM THICK | AS per attached Technical Specifications |
| 8 | BAKELITE SHEET 4x2 FOOT,6MM THICK | AS per attached Technical Specifications |
| 9 | BATTERY 1.5V AAA SIZE | AS per attached Technical Specifications |
| 10 | BATTERY AAR6 DRY CELL | AS per attached Technical Specifications |
| 11 | BIMETAL HOLE SAW CUTTER 50MM | AS per attached Technical Specifications |
| 12 | BRASS BOLT 3by8 x 16G x 2 INCH FULL THREADED WITH NUT WASHER | AS per attached Technical Specifications |
| 13 | BRASS BOLT3by8 x 16G x 3 INCH FULL THREADED WITH NUT WASHER | AS per attached Technical Specifications |
| 14 | BRASS BOLT 6 x 1.25 x 15 MM FULL THREADED WITH NUT WASHER | AS per attached Technical Specifications |
| 15 | BRASS PLAIN WASHER ID - 8 MM, OD - 17 MM | AS per attached Technical Specifications |
| 16 | BRUSH FOR BATTERY TERMINALS CLEANING | AS per attached Technical Specifications |
| 17 | CLEAR BULB 100 WATTS | AS per attached Technical Specifications |
| 18 | CONCRETE DRILL BIT 16 MM | AS per attached Technical Specifications |
| 19 | CONCRETE DRILL BIT 4 MM | AS per attached Technical Specifications |
| 20 | COPPER THIMBLE 1.5 SQMM -PIN TYPE | AS per attached Technical Specifications |
| 21 | COPPER THIMBLE 1.5 SQMM -FORK TYPE | AS per attached Technical Specifications |
| 22 | COPPER THIMBLE 1.5 SQMM -RING TYPE | AS per attached Technical Specifications |
| 23 | COPPER THIMBLE 10 SQMM -RING TYPE | AS per attached Technical Specifications |
| 24 | COPPER THIMBLE 120 SQMM -RING TYPE | AS per attached Technical Specifications |
| 25 | THIMBLE CU 16 SQMM -RING TYPE | AS per attached Technical Specifications |
| 26 | COPPER THIMBLE, 2.5 SQMM -FORK TYPE | AS per attached Technical Specifications |
| 27 | COPPER THIMBLE, 2.5 SQMM -PIN TYPE | AS per attached Technical Specifications |
| 28 | COPPER THIMBLE, 2.5 SQMM -RING TYPE | AS per attached Technical Specifications |
| 29 | COPPER THIMBLE 4SQMM -RINGTYPE | AS per attached Technical Specifications |
| 30 | COPPER THIMBLE 4 SQMM -PIN TYPE | AS per attached Technical Specifications |
| 31 | COPPER THIMBLES 50 SQMM-RING TYPE | AS per attached Technical Specifications |
| 32 | COPPER THIMBLE 6 SQMM -PIN TYPE | AS per attached Technical Specifications |
| 33 | COPPER THIMBLE,6.0 SQ.MM-RING TYPE | AS per attached Technical Specifications |
| 34 | COTTON HAND GLOVES | AS per attached Technical Specifications |
| 35 | CRC 2-26, SPRAY BOTTLE, 300ML | AS per attached Technical Specifications |
| 36 | CUT RESISTANT HAND GLOVES, CUT LEVEL 4 | AS per attached Technical Specifications |
| 37 | CUTTING WHEELAG4 - CUTTING WHEEL DIA-100 MM, THICKNESS-1 MM | AS per attached Technical Specifications |
| 38 | ELECTRICAL SAFETY HAND GLOVES SUITABLE FOR 33KV SYSTEM | AS per attached Technical Specifications |
| 39 | GENERIC WIRE CABLE STRIPPER ELECTRICIAN KNIFE,6 INCH | AS per attached Technical Specifications |
| 40 | GRINDING GOGGLES | AS per attached Technical Specifications |
| 41 | HALOGEN LAMP ROD-TUBE 1000 W | AS per attached Technical Specifications |
| 42 | HALOGEN LAMP ROD-TUBE 500 W | AS per attached Technical Specifications |
| 43 | HEATING ELEMENT 1500 W | AS per attached Technical Specifications |
| 44 | HEXA BLADE DOUBLE EDGE, 25 MM | AS per attached Technical Specifications |
| 45 | HT TAPE INSULATION ROLL | AS per attached Technical Specifications |
| 46 | HYDROMETER | AS per attached Technical Specifications |
| 47 | INSULATING VARNISH | AS per attached Technical Specifications |
| 48 | LED HAND LAMP,12 W WITH 10 METER CABLE | AS per attached Technical Specifications |
| 49 | LINE TESTER LENGTH 125MM | AS per attached Technical Specifications |
| 50 | LOCTITE 495 , PART NO- 41052, 20 GRAM BOTTLE | AS per attached Technical Specifications |
| 51 | M SEAL 75GM | AS per attached Technical Specifications |
| 52 | MACHINE SCREW WITH NUT WASHER, 3 MM DIA, 2.5 INCH LENGTH | AS per attached Technical Specifications |
| 53 | MACHINE SCREW WITH NUT WASHER, 4 MM DIA, 2.5 INCH LENGTH | AS per attached Technical Specifications |
| 54 | MCB SINGLE POLE, 25A, 250V AC | AS per attached Technical Specifications |
| 55 | MS PLAIN WASHER ID - 8 MM, OD - 17 MM | AS per attached Technical Specifications |
| 56 | MS WOODEN SCREWS 1.5 INCH | AS per attached Technical Specifications |
| 57 | MULTIMETER LEAD, 1.1KV, 20 A | AS per attached Technical Specifications |
| 58 | ADD ON AUXILIARY BLOCK, 1 NC CONTACT, CONTACT RATING 10 AMPS | AS per attached Technical Specifications |
| 59 | ADD ON AUXILIARY BLOCK, 1 NO CONTACT, CONTACT RATING 10 AMPS | AS per attached Technical Specifications |
| 60 | NOSE PLIER 6 INCH | AS per attached Technical Specifications |
| 61 | NUT WASHER FOR MACHINE SCREW 3BY16 INCH | AS per attached Technical Specifications |
| 62 | CABLE TIE 150MM | AS per attached Technical Specifications |
| 63 | CABLE TIE 200MM | AS per attached Technical Specifications |
| 64 | CABLE TIE 250MM | AS per attached Technical Specifications |
| 65 | CABLE TIE 100MM | AS per attached Technical Specifications |
| 66 | NYLON CABLE TIE 400MM | AS per attached Technical Specifications |
| 67 | CELLO TAPE WHITE TRANSPARENT 2 INCH | AS per attached Technical Specifications |
| 68 | PACKING TAPE 3 INCH BROWN | AS per attached Technical Specifications |
| 69 | PAINT BRUSH 2 INCH | AS per attached Technical Specifications |
| 70 | PAINT BRUSH 4 INCH | AS per attached Technical Specifications |
| 71 | PENDENT HOLDER5AMP | AS per attached Technical Specifications |
| 72 | PETROLLEUM JELLY | AS per attached Technical Specifications |
| 73 | PRECISION SCREW DRIVER KIT | AS per attached Technical Specifications |
| 74 | PROVAR ANTI TRACK Z906, 500ML BOTTLE | AS per attached Technical Specifications |
| 75 | PVC BOARD SWITCH BOX - 10 X 8 INCH | AS per attached Technical Specifications |
| 76 | PVC BOARD SWITCH BOX-7x4 INCH | AS per attached Technical Specifications |
| 77 | PVC INSULATION TAPE | AS per attached Technical Specifications |
| 78 | SCREW DRIVER WITH INSULATED SLEEVE 100, 150, 200, 250 MM - SET OF 4 PCS | AS per attached Technical Specifications |
| 79 | SINGLE CORE FLEXIBLE COPPER CABLE, SIZE 1.5 SQR. MM | AS per attached Technical Specifications |
| 80 | SINGLE CORE FLEXIBLE COPPER CABLE, SIZE 2.5 SQMM | AS per attached Technical Specifications |
| 81 | SINGLE POLE MCB C-SERIES 32A, 240V, 50HZ, 10KA | AS per attached Technical Specifications |
| 82 | SLIDE WRENCH 12 INCH | AS per attached Technical Specifications |
| 83 | 3 PIN PLUG TOP 15 AMP | AS per attached Technical Specifications |
| 84 | 3 PIN SOCKET 5 AMP | AS per attached Technical Specifications |
| 85 | SOLID CARBIDE DRILL BIT- 2, 2.5, 3, 3.5, 4 MM - SET OF 5 PCS | AS per attached Technical Specifications |
| 86 | SUNMICA SHEET 7 x 4 INCH | AS per attached Technical Specifications |
| 87 | SUNMICA SHEET 8.5 X 10.5 or 8 X 10 INCH | AS per attached Technical Specifications |
| 88 | SWITCH 5 OR 6 AMP | AS per attached Technical Specifications |
| 89 | PTFE THREAD SEAL TEFLON TAPE, WIDTH- 12.05 MM X LENGTH- 25 M | AS per attached Technical Specifications |
| 90 | TOOL KIT BAG | AS per attached Technical Specifications |
| 91 | WIRE STRIPPER6 INCH | AS per attached Technical Specifications |
| 92 | 9 VOLT BATTERY CELL | AS per attached Technical Specifications |
| 93 | PVC INSULATED MULTI STRAND SINGLE CORE FLEXIBLE COPPER CABLE 1.00 SQMM | AS per attached Technical Specifications |
| 94 | MCB 1 AMP SINGLE POLE, 220V DC | AS per attached Technical Specifications |
| 95 | MCB 2 AMP SINGLE POLE, 220V DC | AS per attached Technical Specifications |
| 96 | MCB, TYPE C2, 2P, 2A, 220 V DC | AS per attached Technical Specifications |
| 97 | MCB 2P, 250 V DC, 10 A | AS per attached Technical Specifications |
| 98 | MCB 2P,220V DC, 16A | AS per attached Technical Specifications |
| 99 | ETHERNET CABLE CAT 6 | AS per attached Technical Specifications |
| 100 | PHASE FAILURE RELAY, MINILEC, ALVD2 | AS per attached Technical Specifications |
| 101 | THERMAL OVER LOAD RELAY, MN5, 30 TO 50 AMP | AS per attached Technical Specifications |
| 102 | MOTOR PROTECTION RELAY MPR200NX - 32 TO 88A | AS per attached Technical Specifications |
| 103 | ELECTROSOL E- PART NO- RXSOL-16-1090-025 -PACK OF 50 LTRS | AS per attached Technical Specifications |
| 104 | 2 CORE X 1.5 SQMM PVC INSULATED COPPER CONDUCTOR FLEXIBLE PVC SHEATHED CABLE, 1100 VOLT | AS per attached Technical Specifications |
| 105 | SOCKET 15 OR 16 AMP, 3 PIN, PIANO TYPE | AS per attached Technical Specifications |
| 106 | M6 - 1x20 MM, HEX BOLT 12.9 GRADE ALLOW STEELFULL THREADWITH NUT - PACK OF 1 KG | AS per attached Technical Specifications |
| 107 | M6 - 1x40MM HEX BOLT 12.9 GRADE ALLOW STEELFULL THREAD WITH NUT - PACK OF 1 KG | AS per attached Technical Specifications |
| 108 | ANCHOR BOLT 12MM x 150MM | AS per attached Technical Specifications |
| 109 | BATTERY TERMINAL - P | AS per attached Technical Specifications |
| 110 | BATTERY TERMINAL - N | AS per attached Technical Specifications |
| 111 | CARBIDE DRILL BIT 10MM | AS per attached Technical Specifications |
| 112 | CARBIDE DRILL BIT 12MM | AS per attached Technical Specifications |
| 113 | CENTRE PUNCH 150MM | AS per attached Technical Specifications |
| 114 | CIRCLIP PLIER EXTERNAL SIZE- 300 MM | AS per attached Technical Specifications |
| 115 | COMBINATION PLIER 8 INCH | AS per attached Technical Specifications |
| 116 | COPPER THIMBLE 10 SQMM-FORKTYPE | AS per attached Technical Specifications |
| 117 | COPPER THIMBLE 16 SQMM - U TYPE FORK TYPE | AS per attached Technical Specifications |
| 118 | COTTON TAPE ROLL 25 MM X 25 METER | AS per attached Technical Specifications |
| 119 | CRIMPING TOOL PLIER TYPE 1.5-6 SQMM | AS per attached Technical Specifications |
| 120 | DANGER SIGNBOARD, SIZE 8x10 INCH FOR 400 KV | AS per attached Technical Specifications |
| 121 | DANGER SIGNBOARD, SIZE 8x10 INCH FOR 33 KV | AS per attached Technical Specifications |
| 122 | DANGER SIGNBOARD, SIZE 8x10 INCH FOR 11 KV | AS per attached Technical Specifications |
| 123 | DANGER SIGNBOARD, SIZE 8x10 INCH FOR 415V | AS per attached Technical Specifications |
| 124 | DANGER SIGNBOARD, SIZE 8x10 INCH FOR 240V | AS per attached Technical Specifications |
| 125 | DANGER SYMBOL, SKULL AND BONE BOARD - 10x10 INCH | AS per attached Technical Specifications |
| 126 | DRILL CHUCK SIZE 1-13 MM WITH SDS ADAPTOR AND KEY SET- FEMALE | AS per attached Technical Specifications |
| 127 | EAR MUFF, TWIN HEADBAND DESIGN, SOFT CUSHION | AS per attached Technical Specifications |
| 128 | ELECTROLYTE POTASSIUM HYDROXIDE FOR ALKALINE NI-CD BATTERY | AS per attached Technical Specifications |
| 129 | ELECTROLYTE SULPHURIC ACID FOR LEAD-ACID BATTERY, SPECIFIC GRAVITY 1250 | AS per attached Technical Specifications |
| 130 | ANGLE GRINDER AG-4, 750W, MAX SPEED- 12000 RPM, DISC DIA- 100MM | AS per attached Technical Specifications |
| 131 | EPOXY PAINT BLUE | AS per attached Technical Specifications |
| 132 | EPOXY PAINT WHITE | AS per attached Technical Specifications |
| 133 | EPOXY PAINT RED | AS per attached Technical Specifications |
| 134 | FLAT FILE ROUGH 12 INCH | AS per attached Technical Specifications |
| 135 | FLAT FILE SMOOTH 12 INCH | AS per attached Technical Specifications |
| 136 | PU FOAM SPRAY SEALANT, 750ML BOTTLE | AS per attached Technical Specifications |
| 137 | GI NUT AND BOLTS WITH WASHER FULL THREAD, SIZE- DIA- 8MM, LENGTH - 45MM | AS per attached Technical Specifications |
| 138 | GI NUT AND BOLTS WITH WASHER FULL THREAD, SIZE-DIA- 6MM, LENGTH - 45MM | AS per attached Technical Specifications |
| 139 | GI NUT AND BOLTS WITH WASHER FULL THREAD, SIZE-DIA- 4MM, LENGTH - 45MM | AS per attached Technical Specifications |
| 140 | GI NUT BOLT M10 x 50 WITH NUT AND WASHER, FULL THREADED | AS per attached Technical Specifications |
| 141 | GI NUT BOLT M12 x 50 WITH NUT AND WASHER, FULL THREADED | AS per attached Technical Specifications |
| 142 | HEAVY DUTY SOCKET - 1BY2 SQ DRIVE, 19 MM,LENGTH - 100MM | AS per attached Technical Specifications |
| 143 | HSS BOLT 12x1.75X60 MM WITH NUT AND WASHER | AS per attached Technical Specifications |
| 144 | HSS BOLT 12x1.75X75 MM WITH NUT AND WASHER | AS per attached Technical Specifications |
| 145 | HSS BOLT 6x1.25x15 MM FULL THREAD WITH NUT AND WASHER | AS per attached Technical Specifications |
| 146 | ISOPROPYL ALCOHOL | AS per attached Technical Specifications |
| 147 | HOLE PUNCH SETFOR GASKETS - 8,10,12,16,20,24,30,36MM SET OF 8 PCS | AS per attached Technical Specifications |
| 148 | LED INDICATION LAMP, UNIVERSAL TYPE, 24-240V AC DC, YELLOW | AS per attached Technical Specifications |
| 149 | LED INDICATION LAMP, UNIVERSAL TYPE, 24-240V AC DC, GREEN | AS per attached Technical Specifications |
| 150 | LED INDICATION LAMP, UNIVERSAL TYPE, 24-240V AC DC, RED | AS per attached Technical Specifications |
| 151 | LED INDICATION LAMP, UNIVERSAL TYPE, 24-240V AC DC, BLUE | AS per attached Technical Specifications |
| 152 | LOCK 7 LEVER | AS per attached Technical Specifications |
| 153 | MCB 16 AMP DOUBLE POLE | AS per attached Technical Specifications |
| 154 | MCB SINGLE POLE, 20A, 250V AC | AS per attached Technical Specifications |
| 155 | MCCB THREE POLE, 415V, 32A | AS per attached Technical Specifications |
| 156 | MEASURING TAPE 5 MTR | AS per attached Technical Specifications |
| 157 | MCB, DOUBLE POLE, 6 AMP, C- SERIES | AS per attached Technical Specifications |
| 158 | NITRILE COATED HAND GLOVES, PUNCTURE LEVEL 3, TEAR LEVEL 3, CUT LEVEL 5 | AS per attached Technical Specifications |
| 159 | NYLONE ROPE 1BY2 INCH | AS per attached Technical Specifications |
| 160 | ON DELAY TIMER, 1MIN-60MIN, 24V DC OPERATED | AS per attached Technical Specifications |
| 161 | PAINT REMOVER THINNER | AS per attached Technical Specifications |
| 162 | HEAVY DUTY PIPE WRENCH, LENGTH-300MM | AS per attached Technical Specifications |
| 163 | HEAVY DUTY PIPE WRENCH, 24 INCH | AS per attached Technical Specifications |
| 164 | REVERSIBLE RATCHET 1BY2 INCHSQUARE DRIVE | AS per attached Technical Specifications |
| 165 | SHUT DOWN REFLECTIVE REDIUMSIGN BOARD SIZE- 15x30 CM | AS per attached Technical Specifications |
| 166 | SIDE CUTTING PLIER- 150MM | AS per attached Technical Specifications |
| 167 | SINGLE POLE MCB C-SERIES 6A, 240V, 50HZ, 10KA | AS per attached Technical Specifications |
| 168 | SLIDE WRENCH ADJUSTABLE SPANNER 18 INCH | AS per attached Technical Specifications |
| 169 | 5- PIN SOCKET 15 OR 20 AMP | AS per attached Technical Specifications |
| 170 | SOCKET 18 MM,1BY2 SQUARE DRIVE | AS per attached Technical Specifications |
| 171 | SOLID STATE TIMER , MODE- SAS-P, 220 VDC, TIMING RANGE3-300 SECS | AS per attached Technical Specifications |
| 172 | SWITCH -15 OR 16AMP | AS per attached Technical Specifications |
| 173 | 1.5 SQMM TERMINAL BLOCK | AS per attached Technical Specifications |
| 174 | TERMINAL BLOCK 2.5MMFOR DIN RAIL | AS per attached Technical Specifications |
| 175 | TERMINAL BLOCK 4MM FOR DIN RAIL | AS per attached Technical Specifications |
| 176 | TIME DELAY ON PICK UP, RANGE-0.4-30 SEC, 220VAC, 36000VA, BREAK-360VA 1NO AND 3NC | AS per attached Technical Specifications |
| 177 | TURPENTINE OIL | AS per attached Technical Specifications |
| 178 | PNEUMATIC RUBBER HOSE PIPE- 1BY2 INCH | AS per attached Technical Specifications |
| 179 | 240 VAC CONTACTOR 2NO AND 2NC WITH ADD ON BLOCK 2NO AND 2NC | AS per attached Technical Specifications |
| 180 | RUST REMOVER | AS per attached Technical Specifications |
