Construction Of Badminton Court At Govt Primary School Thanger 2Nd Call- 1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : 2 Providing and laying in position cement concreteof specified gradeexcluding the cost of centering and shuttering . All works upto plinth level 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregates) 40 mm nominal size (crushed) 3 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 4 Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Reinforcement for R.C.C work including straightening, cutting, bending , placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. 6 Centring and shuttering including strutting,propping etc. and removal of Edges of slabs and breaks in floors and walls under 20 cm 7 Supply & fixingof 40mm wide PVC strips for joints 8 Providing & laying PP (polypropylene ) tileapproved by FIBA with minimum thickness of 15.5 mm and weight not less than 500 gm/ tile and other specification like Ball Rebound, slip resistance, force reduction as per parameters approved by FIBA. The contractor shall have to provide the unconditional warrenty of 8years from the OEM or its Authorised Distributor in India andget the sample of tile Tested from NABL Accrediated lab before payment 9 Providing of fixing of fixed height adjustable poles (minimum 3inch) with net with line marking 10 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth 11 Steel work welded in built up section framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer. 12 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 13 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coat on new work 14 Supply and laying of PVC insulated and PVC sheathed / xlpe aluminium power cable of 1.1 KV grade of following sizes on surface / direct in ground including sand cushioning protective covering and refilling the trench as required as per direction of Engineer Incharge 16 sq. mm 2 core 15 Supply and laying of PVC insulated unsheathed bright annealed bare copper industrial cablefor voltage grade upto 1100V as per IS694:19903 core4 sq. mm 16 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 17 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door SPN MCBDB 18 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral 32 Amp 19 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral 63 Amp 20 Installation, Testing and commissioning IP 67 Flood lights 200 wattminimum Luminous flux of luminaire 120 Lm/w, Colour temperature of 5700K, Neutral white, CRI > 80, 50,000 operating hours with PCLens and necessary wire for connection and other accessories required for fixing lights on existing Poles. Firm has to submit originallity certificate of material from OEM or Authorized Distributor with 05 years of warranty. 21 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machinewith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge 22 Providing and fixing ACP main board 3mm thickness on 1 x 1 inch tubular frame with writing of Name of stadium etc as per direction of engineer incharge 23 Supplying, installation, testing and commissioning of 150/150 Liters of water Cooler having full stainless steel body, cooling capacity 150ltr/hour and storage capacity 150 ltralongwith PVC connecting pipes and earthing as required.Warrantee.:- 3 Years from the date of completion of work. . 24 Supplying, installation, testing and commissioning of following type of water purifiers alongwith PVC connecting pipes as required (RO + UV + UF mineral control with TDS control ) Warrantee.:- 3 Years from the date of completion of work 25 Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 3 Years from the date of completion of work 26 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank 27 Providing and fixing G.I. pipes complete with G.I. fittings (external work)15 mm dia. nominal bore medium 28 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete15 mm nominal bore 29 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)15 mm nominal bore 30 carriage of sand by mt 31 carriage of Stone Agg. for a distance by mt 32 Provision for supply and Installation ofPedestal for Inaguration made of MS Frame 40 x 40 x 2.6 mm with 4 mm thick ACP Sheet as base of size 4 x 6 and Acrylic Inaguration Plate Acrylic sheet cover as per direction of Engineer Incharge
