Tender For Addn/Altn Of Md Accn Of Chandimandir Mil Stn; 1 B&R ITEMSExcavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out soft and loose soil, complete all as specified and directed 2 Hackingoutoldbrokenglass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty complete all as specified and directed. 3 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 4 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing unserviceable tiles to store and rubbish off the premises of MOD landcomplete all as specified and directed. 5 Removing excavated materialexceeding250 m but not exceeding500 m and depositing where directed, complete all as specified and directed . 6 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. 7 Demolition of existing brick tiles or terracing tiles single layer on roof grouted in cement mortarcomplete all as specified & directed. 8 Demolition of Mud in roofs, any thickness,including plastering and leeping(whether full thickness removed or only a part there of, complete all as specified & directed. 9 Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed all as specified and directed. 10 Demolition of un-reinforced cement concrete exceeding 15cm thick on any description and in any positionnot other wise specially provided for and removing all demolished material/debris to 1.50Km from the site and depositing where directed complete all as specified and directed. 11 Demolition of cement concreteis reinforced(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed . 12 Demolition of brick work masonry, built in cement mortar including dismantling all quions,arches, pillars etc complete all as specified and directed . 13 Demolition of RCC louvers / jalli in shaft & other similar places &debris removed from site upto distance 2km from site, height upto 15m , including all scaffolding and neccessary safety arrangement complete all specified and directed. 14 Taking down cement plaster on brick/stone walls etc including raking out joints, hackingfor key scrubbing down with water etc complete all as specified and directed . 15 Taking down chowkhats/frames exceeding 1.5 Sqm but n.exc 4 Sqm including shutters (without taking off shutters from the frames complete all as specified and directed . 16 Taking down chowkhats/frames excnot exceeding 1.5 Sqm including shutters (without taking off shutters from the frames) including grill etc complete all as specified and directed. 17 Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqmcomplete all as specified and directed. 18 Taking up ordown steel tubingand connections 15mm bore complete all as specified and directed. 19 Taking up ordown steel tubingand connections 20mm bore complete all as specified and directed. 20 Taking up ordown steel tubingand connections 50 mm bore complete all as specified and directed. 21 Material and Labour for Non Skid ceramic colouredtiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick cement mortar (1:4) screed bed for floor finishes complete all as specified and directed . 22 Material and Labourfor Non Skid ceramic colouredtiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in skirting,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement plaster (1:3) on vertical surfaces of brick workcomplete all as specified and directed . 23 Material and LabourforGlazed ceramic coloured printed tilesin vertical surfaces of size 300 x 450x 7mm set and jointed in neat cement slurryover 10 mm thick rendering in CM 1:4for receiving the tiles complete all as specified and directed . 24 Material and Labourfor non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15 mm thick screed bed for floor finishes in CM 1:4 complete all as specified and directed . 25 Materials and labour for 16-18mm thickgranite (of any type) work (table rubbedand polished) in steps, jambs, pillars, window-cills, cooking plateformand like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . 26 Providing edge moulding to 16-18 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. complete all as specified and directed . 27 Providing Cement Concrete 1:2:4 type B-0 (using 12.5 mm agg.) in seismic and other similar bands, shelves, post holes , hold fast , pcc blocks, coping, benching,roof kerbs of mud stops, rounded or chamfered on edges and like including necessary form work etc complete all as specified and directed . 28 Material and Labourfordubbing out average 20 mm thick cement plaster (1:4) on irregular faces of walls/RCC surfaces (Roof, Chajja, Facia etc)complete all as specified and directed . 29 Material and Labourformild steel TMT bars 10mm dia & over, cut to length, bent to shape reqd including cranking, bending spirally for columns, hooking ends & binding with and includingMS wire annealed not less than 0.9 mm dia welding as required at site as directed and specified etc complete all as specified and directed . 30 Material and Labourforbrick work with sub class B bricks class designation 100, straight/curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed . 31 Material and Labourforbrick work with sub class B bricksclass designation 100 straight/curved on plan to any radius built in cement mortar (1:4) as in half brick thick walls complete all as specified and directed . 32 Material and labour for 10mm thick rendering for fair face brick work Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . 33 Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished fair and even with using WPCcomplete all as specified and directed .Note :- (WPC shall be paid separately ) 34 Material and LabourforRendering 5 mm thick on fair faces of concrete surfaces, fininshed even and smooth without using extra cemnt on ceiling in cement mortar 1:3 complete all as specified and directed . 35 Complete removal of existing treatment on wall complete all as specified and directed . 36 Material and Labourforapplying wall care putty of 1.5 mm thick in two layres including rubbing the surface in each layers of wall putty with sand paper on application of wall putty,complete all as specified and directed . 37 Material and Labourforcement concrete type B1 1:2:4 (20 mm graded aggregate ) in surface channel and drains ,complete all as specified and directed . 38 Material and Labourfor concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested , in cement concrete 1:3:6 type C-2, including demolition of exiting pipe ,complete all as specified and directed . 39 Refixing of shutters in the same opening includingtaking down and easing and adjusting, exc 1.00 sqm and not exc 2.00 sqm complete all as specified and directed . 40 Supply and fixing offactory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thickMS sheet, including necessary fixing lugs, hinges, lock strike plate,thress hold bar/flat etc. and one shop coat of primer complete all as specified and directed by Engineer-in -charge. 41 Supply and fixing of pressed steel frames of size 105 x 60mm for doors with one/more rebates including necessary fittings, lugs, hinges, lock strike plate and one shop coat of primer complete all as specified and directed . 42 Plain cement concrete 1:3:6 type C-1using 20 mm gradedstone aggregate as in roof kerbs or mud stops and benching, rounded or chamfered on edges ,filling under hollow MS chowkat complete all as specified and directed . 43 Supply and fixing of 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both side complete, all as specified and directed . 44 Supply and fixing of 35 mm thick second class hard woodglazed and skelton shutters open rebated prepared to receivedglass gauge etc,( without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part-1, section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and directed . 45 Supply and fixing of Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed Stainless Steel wire staples complete all as specified and directed . 46 Supply and fixing of as in repair of Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with Stainless Steel wire staples complete all as specified and directed . 47 Material and Labour forpreperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paintover & including one coat of prime complete all as specified and directed . 48 Material and Labour for preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paintfor choukhat frame complete all as specified and directed . 49 Material and Labour for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed . 50 Material and Labour for onecoat of synthetic enamel paint on the old wooden surfaces of any description exc 10 cms width/girth including preparation of surfaces complete, all as specified and directed . 51 Material and Labour for onecoat of synthetic enamel paint on the old steel surfaces of any description exc 10 cms width/girth including preparation of surfaces complete, all as specified and directed . 52 Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified as per Manufacturer broucher. 53 Supply and fixing of Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter , complete all as specified and directed . 54 Supply and fixing of 100 mm Aluminiumhandles cast type anodised complete all as specified and directed . 55 Supply and fixing of magnetic catcher cum silencer CP and fixed with standard steel screws, complete all as specified and directed . 56 Supply and fixing of 40mm dia, supboard knobs fixed with nut,screw and washer of mild steel, bright finished, complete all as specified and directed 57 Supply and fixing ofContinuous piano type hinges having flap width 40mm when open mild steel, bright finish or electrogalvanised complete all as specified and directed . 58 Supply and fixing of 100 mm long Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed . 59 Supply and fixing of100 mm size but hinges medium weight cold rolled stainless steel complete all as specified and directed . 60 Supply and fixing of 200 mm size Aluminium , barrel tower bolt of extruded section complete all as specified and directed. 61 Supply and fixing of Aluminium handle, cast type anodized of size 150 mm, complete all as specified and directed . 62 Supply and fixingin repair 25mm dia Stainless Steel curtain rod withfancy brackets/end brackets/fennels andfixing stopsetc complete all as specified and directed. 63 S&F in repair plate rack of stainless steel of size 750X600X250 mm with steel shelves and hanging arrangements for utensil made out of not less than 0.63 mm thick sheetcomplete all as specified and directed. 64 Supply and fixingin repair Kitchen Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 915mmx460mm bowl size 410x330x160mm complete all as specified and directed . 65 Supply and fixingin repair 110mm dia PVC Rain water pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed . 66 Supply and fixing of110 mm bore PVCbends of any radius complete all as specified and directed . 67 Supply and fixing of PVC(SWR) gully traps125/110 mm dia setting and jointing with cement solvent complete all as specified and directed . 68 Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including pvc seat cover complete all as specified and directed . 69 Supply and fixingin repair 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, valve, float and handle including bracktes complete all as specified and directed . 70 Supply and fixing in repair Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down with iron pipe or brass ferrule, suitable for 15 mm bore pipe complete, all as specified and directed . 71 Supply and fixing ofPVC connections, 15mm bore size, 450 mm lengthwith PTMT nut etccomplete all as specified and directed . 72 Supply and fixing in repairtowel rail 600mm long ofPTMT fixed with and including chromium plated screws and wooden / plastic cleats (minimum weight 190gms),complete all as specified and directed . 73 Supply and fixing in repair towel ring ofPTMT fixed with and including chromium plated screwswith pvc rawl plugs complete all as specified and directed . 74 Supply and fixingin repair of brass chromium plated shower rose, 125mm size with long swivel plush CP arm complete all as specified and directed . 75 Supply and fixing in repairs ofangle stop cock, fancy type 15mm bore, chromium plated complete all as specified and directed . 76 Supply and fixingin repairHealth faucet stainless steel body with 1.20metre stainless steel connection pipefor 15mm bore with fittings,complete all as specified and directed . 77 Supply and fixingin repair central hole washbasin CP Brass mixer 15mm bore dia pipe for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . 78 Supply and fixing in repair CP brass Wallmixer system with L bend including provn for Over Head shower , 15mm bore chromium plated fancy type ,complete all as specified and directed . 79 Supply and fixing of corner glass shelf assembly 5.5 mm thick glass 300x300mm wide bevelled edge/ hatching of edgesfixed with stainless steel D brackets with railing complete all as specified and directed . 80 Material and Labour for Plain cement concrete 1:5:10 (using 40mm graded brick aggregate)as in sunken filling and mass concrete complete all as specified and directed . 81 Supply and fixing of in repair looking mirror fancy type decorative patternof size 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and directed . 82 Material and Labour for 50 mm thick PCC 1:3:6 type C-1 (20 mm graded stone aggs) as in plinth protection / ramp including finishing surfaces even and smooth without using extra cementcomplete all as specified and directed . 83 Supply and fixing rotational moulded water storage tank (cylindrical vertical with closed top ) triple layered hoisted and fixed in position capacity 500 ltrs with 20mm dia PTMTfloat valveand tank nipple etc including dismantling existing water tank complete ,all as specified and directed. 84 Material & Labour mild steel workin framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanksand similar work conforming to Fe 290 Gde E-165, complete ,all as specified and directed. 85 Material & Labour150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete,all as specified and as directed . 86 Supply and fixing of factory made solid panel PVC board 20mm thick with 2 mm thick prelaminated PVC sheet on front face and 2 mm prelaminated PVC sheet on back with particle board core fixing in frame at site to the cup board shutter, shelves and kitchen cabinet complete all as specified and directed. 87 Supply and fixingin repair 18/19 mm thick plywood, grade BWP, type BB fixed with screws to timber frame work, for shelf in cupboard and kitchen cabinet including wooden clit and all necessary fittings complete all as specified and directed. 88 Supply and fixingof stainless steel butt hinges 75 mm long medium weight with stainless steel screws complete ,all as specified and as directed . 89 Supply and fixing of stainless steel finish ,fancy type handles 75 mm size complete ,all as specified and as directed . 90 Supply and fixing100 mm long Aluminium anodised barrel tower bolts of extruded section complete ,all as specified and as directed . 91 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws,and including making good dismantled portion with PCC (1:2:4) type B-1 & cement mortae (1:3) , complete all as specified and directed . 92 Supplying and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and directed . 93 Supply and fixing of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern,(apperture of grill should not be more than 75 mm) with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including aluminium U channel and all neccessary fittings ,all complete as specified and directed . 94 Supply and fixing 4mm thick figured (frosted)glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square not exceeding0.5 Sqm in each pane complete all as specified and directed . 95 Supply and fixing 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square not exceeding 0.5 Sqm in each panes complete all as specified and directed . 96 Supply and fixing of Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. 97 Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. 98 Supply and fixing of 300mm, ordinary rat tail rod pattern springs including roller and roller platecomplete including welding on chowkhat complete all as specified and directed. 99 Material & Labour for 100 mm thick PCC (1:4:8 ) type C-1 using 40 mm graded stone aggregate as in sub basecomplete ,all as specified and directed. 100 Material & Labour for 25 mm thick PCC (1:2:4 ) type B-0 using 12.5 mm graded stone aggregate as in sub base (as levelling coarse) complete ,all as specified and directed. 101 H.D.P.E Double wall Corrugated(DWC) pipes (ISI marked) 150 mm bore SN-8 Class as per IS 16098 part II for non pressure underground drainage and sewerage applications with specials including cost of special O rubber ring couplers etc. ,laid intrenches on concrete bed to level/gradient jointing with appropriate class fittings as per manufacturers instructions including jointing accessories and fittings complete, all as specified and directed. 102 Material and Labour forExtra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tracement, including forms, moulds, mi- tred/stopped ends etc. complete ,all as specified and directed. 103 Providing precast cement conrete type B1 1:2:4, 20mm graded aggregate, set in cement mortar 1:6 in landing, cover slabs (for man holes etc), shaft cover at roof level, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete ,all as specified and directed. 104 Material and labour forintegral water proofing compound ISI marked complete all specified and directed . 105 Material and labour for Preparing surface of wall and applying 15mm thick rendering in cement mortar 1:4with integral water proofing compound on wall surface including applying two coats ofEpoxy Resin coating Polymer modified cementation coating as per manufacturers instructionsas on wall over the plaster surface (in shaft area) , height upto 15m including all necessary scaffolding & safety equipment etccomplete all as specified and directed. Note : Above coated rates are inclusive of scaffolding, safety equipment, liquid water proofing compound and epoxy rasin coating.Note :- Epoxy rasin coating shall be done by authorised applicator. 106 M&L for preparation of surface to remove all lose material, clean by wire brush and clean with water apply two coat of dampproof compounent,brush bond , as per manufacturer instruction. Apply second coat perpendicular direction to first coat and after 4 - 6 hours dry of first coaton wall or similar area complete all as specified and as directed by Engr-in-Charge.Note :- Dampproof coating shall be done by authorised applicator. 107 Material and labour for Distempering with 1st quality nanotechnology based nano water based premiumacrylic distemper (ready mixed) having VOC content less than 50 gms/litre with unique chemical composition of finest quality are durable,water repellent,becteria resistant, thermally insulating, elastometric, and it should protect the wall from the damaging effects. The paint should be water repellent property , in addition to its polymer composition that prevents dust settling on the wall, including preparation & priming coat,of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coats on wall ( smart periodicals )complete all as specified and directed. 108 Material and labour for Finishing walls with Acrylic Smooth exterior paint of required shade ,nanotechnology based nano water based electomeric finish two coat over and above one coat of water based electomeric primer not containing toxic material likew Pb, Cr, Zn, biocides/ organocides; having defect -free nano - particle withinhibiting characteristics having bacteria killing rate above 40% and high anti - fungal properties, with super- hydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1%. 40 micron DFT of top coat . including scaffolding , surface pre paration & cleaning etc.Two or more coats on wall (smart periodical) complete all as specified and directed.Note :-(i)Distempering shall be done by authorised applicator. (ii)All necessary scaffolding, safety equipment and all other tool & material inclusive in above item qouted rates. 109 Material and labour for for two coat oil bound distemper over a coat of primer on ceiling surface including preparation of new plastered surface complete all as specified and directed 110 Complete removal of existing treatment on ceiling surface and applying two coats of oil bound distemper over a coat of primer on old surface complete all as specified and directed . 111 Material and labour for two coats of white wash on ceiling surface including preparation of old surfaces complete all as specified and directed. 112 Material and labour in repair PVC(SWR)Nahani traps/ floor trap 100mm dia with gratingincluding jointing to wastepipe and setting/ fixedin cement concrete type B-11:2:4 fixedas complete all as specified and directed . 113 Supplying and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mmincluding brackets, CP Waste coupling dia & PVCwaste pipe 32 mm borecomplete all as specified and directed . 114 Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding brass elbow, T and all necessary brass fittings like T, bend & socket for fixing with GI tube complete all as specified.Note: Pressure test shall be conducted by the contractor to check leakage in pipe before plastering/tiling over the pipe. 115 Supplying and laying of 25 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding brass elbow, T and all necessary brass fittings like T, bend & socket for fixing with GI tube complete all as specified.Note: Pressure test shall be conducted by the contractor to check leakage in pipe before plastering/tiling over the pipe. 116 Supplying and laying63 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified and directed . 117 Supplying and laying63 mm bore PVC(SWR)bends of any radius complete all as specified and directed . 118 Supplying and laying 63 mm PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and directed . 119 Supplying and fixing in repair 25 mm Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed . 120 Supply and fixing two way bib taps brass, (includingfixing arrangement of health foucet) fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed, complete all as specified and directed. 121 Material and labour Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required, superficial area not exceeding 150 square centimeter and depth of hole as 1 centimeter complete all as specified and directed . 122 Supply and fixing PVC (SWR) pipes single socketed inany length withrubber ring joints of pressure rating 6kgf/cm2fixed complete to laid in trenches, floor etc,110mm bore single socketed in any lengthof pressure rating 6kgf/cm2, complete all as specified and directed. Note : (i) Smoke test shall be carried out to check the leakage at joints. (ii) Joint of pipe with RCC slab (in case of floor trap/ P trap shall be water sealed with crack repair compound. 123 Supply and fixingin repairPVC (SWR) of pressure rating 6 kgf/cm2 ) Junction (single T) equal or unequal with access door for 110 mm bore pipe, fixed as complete all as specified and directed. 124 Material and labourPCC 1:2:4 type B0(12.5 mm graded stone aggs) as in levelling course, sub base and roof padding, finish even and smooth including mixed withWPC,complete all as specified and as directed .Note : WPC mearusered and paid seperately. 125 Material and labour applying bituminous primer @ 0.40 ltrs per square meter including APP based polymeric membrane minimum weighing 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application,on roof surface and junction of parapets etc., and adjoining vertical surfaces andincluding , cleaning & preparation of surface complete allover as specified and directed.Note : Rates are applicable up to 4 storey building. 126 Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. complete all as specified and as directed . 127 Supply and fixing Anodised aluminium snap grid size of grid 605x605 frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including6mm thick in ceiling flat or sloping Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws→ building boards fixed or laid/inserted to timber/GI/Aluminium frame work fixed with screw as per manufacturers instructions, including dismantling of ceiling complete all as specifiedand directed. 128 Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifiedand directed. 129 Material and labour Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick cement screed in Cement Mortar1:4 , including rubbing and polishing complete all as specified and as directed . 130 Material and labour forgrinding, rubbing and polishing on exiting marbled mosaic floor / Kota stone floor complete all as specified and as directed . 131 Material and labour for PVC (SWR) P’ trap 110 mm, setting and jointing with solvent cement complete all as specified and as directed . 132 Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed . 133 Material and labour for providing water proofing treatment to sunken floors all as given below:-(a) Making fillet of size 25 x 25 mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of acrylic polymer cementious coating for water proofing , two parts of cement and 6 parts of fine sand by weight.(b) Sealing of joints of pipe with Epoxy putty .(c) Cleaning the concrete surface by brushing and watering and applying a coat of acrylic polymer modified cementitious slurry consisting of one part of acrylic polymer cement and two parts of cement by weight. The coating shall be carried out upto 300 mm above FFL and shall be allowed to dry for 4-6 hours.(d) Applying a coat of acrylic polymer cementious coatingbrush topping 1.5mm thick consisting of one part of acrylic polymer cement , two parts of cementand twoparts of silica sand byweightand cured for 2 days.(e) Applying 15mm thick plaster in CM 1:4 mixed with liquid intergral cement water proofing compound @ 100ml per 50 Kg cement on treated surface. 134 INTERNAL ELECTRIFICATIONTaking down copper/aluminium point wiring (light,fan,sockets or power) complete including fixtures and fittings such as switches,ceiling rores sockets etc.,removing materials to storefor keeping in safe custody or for taking credit (credit for items should be made as per conditions separately) and making good disturbed surface,complete all as specified and directed. 135 Taking down ceiling fan/ exhaust fan/ wall fan , sealing cable end, dismantling blades and removing fan and blades to store for safe custody, complete all as specified and directed 136 M&L for Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out,complete all as specified and directed. 137 Material and labourfor Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. 138 Material and labourfor Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 139 Material and labourfor sand filling in trenches for cushioning ofUG cable 8 cm before layingand 15 cm thickafter laying of cable of cableand streching of cable including compacting after filling complete all as specified and directed. 140 Point wiring using approved colour coding as per IS ,with stranded copper conductor1.5 sqmm (nominal area ) single core , flame retardant low smoke and low halogen FRLSHPVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked multi stranded copper conductor including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunken/flush boxesof any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSHflame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly complete for theone light point / fan point/ bell point controlled by one switch , complete all as specified and directed .Note :- 1. Cutting/chasing of wall etc. is not included in the quoted rate of this item and is to be measured and paid separately. 2. Modular metal flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted.3. Only switch socket and fan regulators to be measured and paid separately4.Cost of appropriate size of Eye/Bottle thimbles made up of brass/copper used for connection in switches / sockets to be included in the quoted rate of this item. 141 All as per item no. 140 above, but for one socket outlet 3/5 pin, 5 amps on same board. 142 All as per item no. 140 above, but for one socket outlet 3/5 pin, 5 amps on independent board. 143 All as per item no. 140 above, but for one socket outlet 3/5 pin, 15 amps on independent board size of cable 2.5 sqmm for phase and neutral and 2.5 sqmm as earth wire asspecified 144 Supplying & fixing for modular type switch type, single pole, 230 volt one module , 6 Amps all as specified and directed. 145 Supplying & fixing for modular type switch type, single pole, 230 volt one module , 16 Amps all as specified and directed. 146 Supplying & fixing for modular type socket outlet 2 in 1, 3/5 pin 6 Amps, two module, 230 Volts compete all as specified. 147 Supplying & fixing for modular type socket outlet 2 in 1, 6/16 pin 6 Amps, two module, 230 Volts compete all as specified. 148 Supplying & fixing forCeiling rose surface backlite 65 x 50 mm size three terminal, complete all as specified and directed. 149 Supplying & fixing for modular type fan regulator, single pole, 230 volt two module, all as specified and directed. 150 Supplying & fixing for modular type bell push, single pole, 230 volt one module, all as specified and directed. 151 Material & Labour for disconnection of power supply and taking downcarefully by unscrewing from boards fitting and fixture such as allMCB DB,junction box, panel of any size completeMCCB,MCB complete all as specified and directed. 152 Supplying & fixing ofsheet metal enclosure for MCB DB SPN 240 volts, 12 way double door fitted with bus bar, neutral link, earth barcomplete as specified and directed 153 Supply and fixing of MCB SPN40-63 Amps 230 volts having breaking capaciy 6 KA , C curve ISI,complete all as specified and directed 154 Supply and fixing ofMCB SPN6-32Amps 230 volts having breaking capaciy 6 KA , C curve ISI,complete all as specified and directed. 155 Supply and fixing of Lamp holder, PVC/Polycarbonate type with back plate suitable forbatten fittings complete all as specified and directed. 156 Supply and fixing of slim LED batten with poly carbonate housing and diffuser with elegantly designed end caps 1X 20 W, 220 V, AC connecting up with three core flexible of suitable size from ceiling rose complete as specified and directed. 157 Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable sizecomplete as specified and directed. 158 Disconnecting and taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc, removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed. 159 Supply and fixing ofLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 160 Material & Labourof Sub main wiring using approved colour coding as per ISwith two runs of 10 sqmm PVC insulated, unsheathed cable FRLSH,flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor with one run of 6 sqmm (green colour) PVC insulated, unsheathed cable FRLSH,flame retardant low smoke and low halogen1100 volts grade , ISI marked with multistranded copper conductor connected to common earth dolly with thimbles, drawing into & including PVC Concealed conduit of suitable size ,ISI marked with all accessories onwallsand making good of disturbed surfaces including all conduit fittings, clamps, gutties etc complete all as specified and directed.Note: (i) Three runs (Two for main & one for earth) each of one RM of 6.00 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose. (ii) Cable required for connection to DBs shall deemed to be included and shall not be measured and paid separately. 161 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 162 Material & labour for earthing complete with galvanized steel earth plate electrodesize 600x600x6.0mm thick buried directly in groundvertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanizedearth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 20 mm bore connected to main earth wire on pole or control board or main switch and GI pipe lightgrade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 (20 mm graded stone aggregate), excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion complete all as specified and directed..Note : Quoted rates deemed to include the cost or excavation and earth work PCC Chamber, funnel cover etc. 163 Supplying &Fixing ofElectric bell, AC 230 volt, single pole complete all as specified & directed. 164 Supplying &Fixing of MCCB 4 pole, 3 phase 415 volts of capacity 125 Amp, 16 KA with adjustable thermal and magnetic release complete with proper copper thimble all as specified and directed. 165 Fixing onlyceiling fan 1200 mm sweep as retrieved from item no. 134 , Energy Saving models, Pearl white / white in colour 350 RPM, 220 volt 50 Hz complete with canopy, down rod. Fan blade, Fan hook box type for hanging with complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . 166 Fixingonlyexhaustfan(M.D. supply) of 300 mmand connecting up including provision of cable from ceiling rose/connector to fanas retrieved from item no. 134 , operating voltage at 220-240 V with all mounting accessories. Cutting hole for air ducting of exhaust fan in Circle / square shape or as per site requirement into or through concrete walls built in cement mortar of superficial area suitable for 300mm exhaust fan including making good of disturbed areain cement mortar 1:3 or cementconcrete 1:2:4type B-l and cover hole as required complete all as specified and directed. 167 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp including bracket upto 1.5 meter length as per suitable fittings including clamps,GI bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,complete all as specified and directed. 168 Supplying &Fixing of Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto125 Amp, 415 Volt& outgoing 4 way having IP 43 protection complete all as specified and directed. 169 Supplying &Fixing of sheet metal enclosure of size of5 X 3 and 200mm depth of sheet thickness not less than 2mm including painting, grouting and making good of the surface matching with the existing surfacewith locking arrangement and provision of 8 nos of glass of size 75mmx 150mm in front door for measuring meter reading flush to wall for fixing of 08 Nos energy meter including taking down carefully energy meter including connection complete all as specified & directed. 170 XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 volts grade,cross-sectional area 35 sqmm,31/2 core ,complete all as specified and directed. 171 Supply and Laying un-reinforced precast concrete cable cover class LV, type 1 flat size 250mmX150mmX40mm,complete all as specified and directed. 172 EXTERNAL WATER SUPPLY Excavating in trenches, n exc 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for laying pipes and cables etc. not exceeding 10 sq m on plan andnot exceeding 1.5 m in depth and getting out as in any type of soil, complete all as specified and directed 173 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed 174 Removing excavated materialnot exceeding 50m and depositing where directed at a level not exceeding 1.5 m abovethe starting point complete all as specified and directed 175 Taking up or down steel tubing and connections, including cleaning for refixing or removal to storefor following sizes:- 176 25 mm bore 177 Refixing old steel tubingof 20mm bore GI pipe.and connections in new or old positionincluding cleaning internally and externally, any grade in wall/floor/ceiling including all type of new fittings i.e. sockets, Tee unionelbow etc all as specified and directed 178 Supply , fixing & laying only of 25 mm bore GI tubing, medium grade, with one socket both end threaded in any length including cutting, threading connection in new or old position and all type of GI new fittings for laid in trenchesall as specified and directed. 179 Supply , fixing & laying only of 25 mm bore GI tubing, medium grade, with one socket both end threaded in any length including cutting, threading connection in new or old position and all type of GI new fittings for laid in wall/ceiling/floor, complete all as specified and directed. 180 25 mm boreGI pipe 181 20 mm bore GI pipe 182 15 mm bore GI pipe 183 Taking out unserviceable gun metal globe & supply and fixing of gun metal globe or gate valve, with iron wheel head, screwed both ends andfixed in for 25 mm bore iron pipe complete all as specified and directed. 184 Schedule of Credit
