Tender For Construction Of Additional Toilet For B-Type Quarter, Phase-1, Gail Township, Vijaipur; 1 DEMOLISHING BRICK WORK,RCC,CEMENT CONCRETEDemolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. 2 EARTH WORK IN EXCAVATIONEarth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas up to 1.5m depth including disposal of excavated earth, disposed earth to be levelled and neatly dressed as per direction of EIC. All Kind of Soil including ordinary Rock 3 FILLING AVAILABLE EXCAVATED EARTHFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, leadup to 50 m and lift upto 1.5 m. 4 PCC :1:4:8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 5 PCC :1:2:4Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate) 6 RCC (1:1.5:3)Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 8 CENTERING AND SHUTTERINGCentering and shuttering including strutting, propping etc. and removal of form work for all memebers 9 BRICK WORK Brick work with common burnt clay/ Fly Ash Brick- F.P.S. (non modular) bricks of class, designation 5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) 10 6 MM CEMENT PLASTER6 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 11 12 MM CEMENT PLASTER12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 12 15 MM CEMENT PLASTER15 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) 13 CERAMIC GLAZED WALL TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make: Johnson, Kajaria, Somany). 14 CERAMIC FLOOR TILES OF SIZE 300X300 MMProviding and laying Ceramic floor tiles of size 300x300 mm laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete (Make: Johnson, Kajaria, Somany) 15 VITRIFIED TILES 600X600 MMProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete. Size ofvitrifiedTile 60x60cm (Make: Johnson, Kajaria, Somany) 16 18 MM GRANITE Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 17 PVC DOOR FRAMEProviding and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 18 PVC DOOR SHUTTERProviding and fixing 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge. 19 ALUMINIUM WORKProviding and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) : Powder coated aluminium 20 4 MM FLOAT GLASSProviding and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as perthe architectural drawings and the directions of engineer-in-charge : With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 21 ALUMINIUM SLIDING DOOR BOLTSProviding and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 250x16 mm 22 ALUMINIUM TOWER BOLTSProviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm 23 ALUMINIUM HANDLESProviding and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 24 S.W / PVCGULLY TRAP P TYPE 150X100 MMProviding & Fixing S.W / PVCgully trap P type 150x100 mm 25 C.I. RECTANGULAR COVER 455X610 MM WITH FRAMEProviding & Fixing C.I. Rectangular cover 455x610 mm with frame 26 UPVC PIPE- 110 MM DIAMETERProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter 27 UPVC PIPE- 75 MM DIAMETERProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter 28 UPVC MOULDED FITTINGS/ ACCESSORIES -110 MM Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm 29 UPVC MOULDED FITTINGS/ ACCESSORIES -75 MM Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm 30 WASTE PIPEProviding &FixingofSemi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 31 FLUSHING CISTERNProviding and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.8-10 litre capacity - White 32 PTMT SHELF 450X124X36 MMProviding & Fixing of PTMT Shelf 450x124x36 mm 33 PTMT GRATINGProviding and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid. 100 mm nominal dia with 25 mm waste hole 34 NON-PRESSURE NP2/NP3 CLASS R.C.C. PIPESProviding and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe 35 MAKING THE CONNECTION OF DRAIN OR SEWER LINEMaking connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cementand making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter 36 CPVC PIPES- 20 MM NOMINAL OUTER DIA PIPESProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 20 mm nominal outer dia Pipes 37 CPVC PIPES- 25 MM NOMINAL OUTER DIA PIPESProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 25 mm nominal outer dia Pipes 38 UPVC CONNECTION PIPE WITH BRASS UNIONS -15 MM NOMINAL BOREProviding and fixing uplasticised PVC connection pipe with brass unions15 mm nominal bore 39 PVC WATER TANKProviding & Fixing of PVC water Tank 40 PVC W.C. SEAT COVER-SOFT CLOSEProviding & Fixing PVC W.C. Seat cover 41 STAINLESS STEEL SOAP DISHProviding & Fixing of SS Soap Dish 42 GLASS CORNER SHELF-WALL MOUNT BATHROOM SHELVES (9 X 9 INCH)Providing & Fixing ofGlass Corner Shelf-Wall Mount Bathroom Shelves (9 x 9 Inch) 43 GUN METAL GATE VALVE 25MMProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 44 BRASS FLOOT VALVE 25MMProviding of brass coating float valve set, 25 mm nominal bore 45 TABLE OR COUNTER TOP WASH BASINProviding and Fixing approved shade glazed vitreous China Counter top wash basin size 500 x 435 x 180mm or as required of 15mm dia cp brass Central Hole cutting & making holes in walls, floors & making good. (Make: Jaquar, Hindware, Cera, Jhonson). 46 EWC SEATProviding and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.(Make: Jaquar, Hindware, Cera, Jhonson) 47 ANGLE VALVE : 15MM NOMINAL BOREProviding and fixing C.P. brass angle valve for basin mixer, flush cistern and geyser points of approved quality (Make: Jaquar, Hindware, Cera, Jhonson)15mm nominal bore 48 C.P. BRASS OVER HEAD SHOWER WITH ARM UP TO 150 MM LONGProviding & Fixing C.P. Brass over head Shower with arm up to 150 mm long(Make: Jaquar, Hindware, Cera, Jhonson) 49 C.P. BRASS WASTE 32 MMProviding & Fixing of C.P. brass waste 32 mm 50 C.P. TOWEL RODProviding & Fixing of C.P. towel rod (Make: Jaquar, Hindware, Cera, Jhonson) 51 C.P. TOWEL RINGProviding & Fixing of C.P. towel Ring (Make: Jaquar, Hindware, Cera, Jhonson) 52 C.P. BRASS EXTENSION PIECE - 25MM TO 50MM LONGProviding & Fixing of C.P. Brass Extension Piece 25mm to 50mm long 53 C.P. BRASS TWO WAY BIB COCKProvidingof C.P. Brass two way Bib cock (Make: Jaquar, Hindware, Cera, Jhonson) 54 C.P. BRASS HEALTHFAUCET WITH UP TO 1.5 MTR LONG TUBE Providing of C.P. brass healthFaucet with up to 1.5 mtr long tube(Make: Jaquar, Hindware, Cera, Jhonson) 55 C.P. BRASS CENTRAL HOLE BASIN MIXERProviding And Fixing of C.P. brass central hole Basin Mixer with 450mm long flexible pipe (Make: Jaquar, Hindware, Cera, Jhonson) 56 C.P. BRASS WALL MIXER Providing And Fixing C.P. brass Wall Mixer with Provision for over head shower with 115mm long bend pipe (Make: Jaquar, Hindware, Cera, Jhonson) 57 C.P. CAP/FLANGE FOR ANGLE VALVE, BIB COCK, OH SHOWER ETC. Providing & Fixing C.P. Cap / flange For Angle Valve, Bib cock, OH Shower etc. 58 600X450 MM BEVELED EDGE MIRROR Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws, decorative cap and washers all complete. 59 C.P. TOILET PAPER HOLDERProviding and fixing C.P. brass toilet paper holder of standard size 60 M.S. GRILLSProviding and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 61 WATER PROOFING TREATMENT IN SUNKEN PORTIONProviding and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cementcompound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry 62 WATER PROOFING TREATMENT ON ROOFS OF SLABSProviding and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 63 SAND FILLINGSupplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (As Available Karera Sand , Chambal Sand ) 64 SS WIRE MESHProviding & Fixing of Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 65 FROSTED GLASS SHEET OF NOMINAL THICKNESS 4 MMProviding & Fixing of Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) 66 PROVIDING OF MEDIUM GRADE OF G.I. FITTINGS 15 TO 20MM DIA Providing of medium grade of G.I. Fittings 15 to 20mm dia 67 PLINTH PROTECTIONMaking plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 68 PUTTYProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over plastered surface, for application on interior/exterior on existing surface or uneven surface to prepare the surface even and smooth complete as per direction of EIC. MAKE: Birla, JK, Saint Gobain, ASIAN, BERGER. DULUX, NEROLAC, INDIGO 69 PRIMING COATSProviding & Applying priming coats of interior grade of required colour on old/new, interior/ exterior surface, one or more coats as per manufacture company specification or as per direction of EIC. All materials , labour, tools and tackles, Taxes & duties, loading & unloading transportation complete as per direction of EIC. MAKE: ASIAN, BERGER, DULUX, NEROLAC, INDIGO 70 INTERIOR PREMIUM ACRYLIC EMULSION PAINTPainting with premium acrylic emulsion paint of interior grade of required colour and of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (one or more coat) on old / new surface as per manufacture company specification or as per direction of EIC. All materials , labour, tools and tackles, Taxes & duties, loading & unloading transportation complete as per direction of EIC. MAKE: ASIAN (Apcolite Premium Emulsion), BERGER (Rangoli Total Care), NEROLAC (Beauty Gold) 71 EXTERIOR ACRYLIC EMULSION PAINTPainting with premium acrylic amooth exterior paint weather proof, fungal resistant, dust resistant of required colour and of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (one or more coat) on old / new surface as per manufacture company specification or as per direction of EIC. All materials , labour, tools and tackles, Taxes & duties, loading & unloading transportation complete as per direction of EIC. MAKE: ASIAN (Apex Ultima), BERGER (Weathercoat All Guard), NEROLAC (Excel Total) 72 SYNTHETIC ENAMEL PAINTPainting with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade: (one or more coat) on old / new surface as per manufacture company specification or as per direction of EIC. All materials , labour, tools and tackles, Taxes & duties, loading & unloading transportation complete as per direction of EIC. MAKE: ASIAN (Apcolite Premium Gloss Enamel), BERGER (Luxol High Gloss Enamel), DULUX, NEROLAC (Synthetic Hi-Gloss Enamel), INDIGO 73 EXTENSION NIPPLE FOR WATER TANKProviding and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms 74 ELECTRICAL 75 WIRING GROUP-A (UP TO 3MTRS)Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A (Up to 3mtrs) 76 WIRING GROUP-B (UP TO 4MTRS)Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-B (Up to 4mtrs) 77 WIRING FOR LIGHT/ POWER PLUGWIRING FOR LIGHT/ POWER PLUG WITH 2X4 SQ. MM FRLS PVC INSULATED COPPER CONDUCTOR SINGLE CORE CABLE IN SURFACE/ RECESSED MEDIUM CLASS PVC CONDUIT ALONG WITH 1 NO. 4 SQ. MM FRLS PVC INSULATED COPPER CONDUCTOR SINGLE CORE CABLE FOR LOOP EARTHING AS REQUIRED. 78 WIRING FOR CIRCUIT/ SUBMAIN WIRINGWIRING FOR CIRCUIT/ SUBMAIN WIRING ALONGWITH EARTH WIRE WITH THE FOLLOWING SIZES OF FRLS PVC INSULATED COPPER CONDUCTOR, SINGLE CORE CABLE IN SURFACE/ RECESSED MEDIUM CLASS PVC CONDUIT AS REQUIRED. 2 X 2.5 SQ. MM + 1 X 2.5 SQ. MM EARTH WIRE 79 SUPPLYING AND FIXINGSUPPLYING AND FIXING SUITABLE SIZE GL BOX WITH MODULAR PLATE AND COVER IN FRONT ON SURFACE OR IN RECESS, INCLUDING PROVIDING AND FIXING 3 PIN 5/6 A MODULAR SOCKET OUTLET AND 5/6 A MODULAR SWITCH, CONNECTIONS ETC. AS REQUIRED. 80 SUPPLYING AND FIXINGSUPPLYING AND FIXING SUITABLE SIZE GL BOX WITH MODULAR PLATE AND COVER IN FRONT ON SURFACE OR IN RECESS, INCLUDING PROVIDING AND FIXING 6 PIN 5/6 & 15/16 A MODULAR SOCKET OUTLET AND 15/16 A MODULAR SWITCH, CONNECTIONS ETC. AS REQUIRED. 81 SUPPLYING AND FIXINGSUPPLYING AND FIXING 3 PIN, 5 A CEILING ROSE ON THE EXISTING JUNCTION BOX/ WOODEN BLOCK INCLUDING CONNECTIONS ETC. AS REQUIRED. 82 SUPPLY, INSTALLATION,SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF THE 10 W, 2 FT. LEDTUBE LIGHT, ACCEPTABLE MAKE - PHILIPS/ BAJAJ/ HAVELLS / CG 83 SUPPLY, INSTALLATIONSUPPLY, INSTALLATION, TESTING & COMMISSIONING OF THE 200 MM SWEEP PVC EXHAUST FAN WITH STATOR EARTHING IN BLACK COLOR ACCEPTABLE MAKE - PHILIPS/ BAJAJ/ HAVELLS / CG
