Tender For Providing Of Security Lights At Bop Basanti Along Indo - Bangladesh Border (Ibb) In Aor Of 57 Bn Bsf Under Shq Bsf Raiganj
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Jul 2025
0 days left
EMD
34874
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basanti → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Of Security Lights At Bop Basanti Along Indo - Bangladesh Border (Ibb) In Aor Of 57 Bn Bsf Under Shq Bsf Raiganj
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of 7 Mtrs long hot dip galvanized octagonal pole with base plate made in single section fitted with erection of the pole on provided RCC Foundation with galvanized nuts etc as required. The following specifications should be adhered for pole & accessories :-a) Pole Top dia - 70mmb) Pole Bottom dia - 130 mmc)Thickness of sheet - 3mmd) Galvanized Base plate of size - 220mm X 220 mm X 12 mme) Set of foundation nut & bolts - 04 nos EN 8 grade galavanized 700 mm length be supplied with galvaized nuts, washers, spacer plate & fixing template. The pole shall be fixed using double nuts.f) The set of GS anchor plates having thickness 4mm should be provided at all the connecting joints for providing support.g) The galvanization shouldbe more than 65 micron DFT both inernally and externally and pole should be designed for at least 169 km/hour max wind speedi)The steel used for manufacturing pole should conform to BSEN 10025 GRADE S 355JO and for base plate steel should be Fe 410 conforming to IS 226 / IS 2062. j) Suitable size bolt type treminal block connector withbakelite sheet and MCB rail in the existing junction box of the pole |
| 2 | Providing and installation of 3 Mtrs long medium GI pipe of 50 mm dia suitable for installation of post top lantern including drilling hole of suitable size in pipe alonwith providing of SMC junction of size250x250x160 mmfor cable termination fixing with circular GI strip clamp and MCB din rail for installation of one nos MCB , bolt type teminal block and earth termination etc as required. (Make and model of pipe and SMC junction box will be approved by Engg-In-Charge before instllation) |
| 3 | Supplying, Fabricating & fixing of GI bracket of size 100 mm X 50 mm X 4 mm thick (NS)channelhaving 750 mm length and provision of fixing 02 Nos LED flood lights with 02 nos hole, suitable size nut bolt with washer and each hole have 02 nos slot to move including provision of fixing of bracket on 70mm mm top dia octagonal poleetc.as required as per direction of engg-in-charge. |
| 4 | Providing, installation, testing & commissioningof120 watt LED floodlight with minimum 5 year warranty suitable foroperating voltage 220 V, 50 Hz made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protectionhaving Efficacy > 120 LPW including 10 KV SPD, connection with 3 core 1.5 sqmm PVC copper cable from LED light to pole junction box etc as required. Make Crompton / Havells/ Philips/Bajaj / Surya. |
| 5 | Providing, installation, testing & commissioningof40 watt LED post top light suitable foroperating voltage 220 V, 50 Hzfor indirect light with IP65 protection. Resistant to impact and corrosion. Glare-free and better uniformit including connection with 3 core 1.5 sqmm PVC copper cable from LED light to pole junction box etc as required. Make Crompton / Havells/ Philips/ Bajaj / Surya. |
| 6 | Providing, installation, testing & commissioningof60 watt LED street light with minimum 5 year warranty suitable foroperating voltage 220 V, 50 Hz designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED\"s with secondary optics and IP66 protection having Efficacy ≥110/120 LPW including 10 KV SPDetc as required. Make Crompton / Havells/ Philips/ Bajaj / Surya |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm |
| 8 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm |
| 9 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required( 50 mm dia ) |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 11 | SITC of outdoor/indoor type feeder panel made of 2mm thick CRCA sheet of desired size with 350mm depth suitable for 415 Volt, 3 phase 50 hz power supply complete with hinged doors, having locking arrangement and providing detachable gland plate of thickness 3mm at the bottom, earth bar/ stud, cable alley, Aluminium busbar of suitable size as per CPWD norms as required.. All sheet matel parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in Siemens Grey shade RAL 7032 and supplied with suitable pedastalframe with 4 Nos 600mm long legs with suitable apron all around. The Panel Shall beembeded in 1:3:6 cement concrete foundation of required shape and size 30 cms below ground levelincluding finishing etc as required as per direction of engg-in-charge. (Make of panel - CPRI approved only) (Drawing will be approved from department before fabrication) |
| 12 | Supply installation testing and commissioning of 100/80/63A, 25kA breaking capacity Four Pole MCCB having Ics = 100%Icu with thermal magnetic based releases,interconnections with suitable size aluminium bus bar and suitable size spreader link assemblyetc complete as required as per direction of enggineer-in-charge. make : Legrand/ Schneider / Siemens/ABB/L&T |
| 13 | Supplying and fixing 40 amps rating, 240 volts, \"C\" curve, doublepole mcbwith DIN rail suitable for inductive load of following poles in the feeder pillarboxcomplete with connections, testing and commissioning etc. as required. Make:-L&T/Havells/Schneider/C&S |
| 14 | Supplying and fixing 0.5 amps to 6 amps rating , 240 volts, \"C\" curve, Single pole MCB with DIN rail suitable for inductive load of following poles in the internal junction box of the GI pole complete with connections, testing and commissioning etc. as required. Make:- L&T/ Havells/ Schneider |
| 15 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt ) as required. |
| 16 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 17 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required. |
| 18 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 19 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), ncluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil |
| 20 | Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres. |
| 21 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 22 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 25 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 26 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted) |
AI Tender Summary
Tender Timeline
Jul 18, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender