Tender For Interior Works At Mettugadda Branch => Limited; 1.0 PARTITIONS: Providing and fixing partition in position as per design with 50mmx50mm solid wood finished section frame work @ 600mmc/c both ways screwed to the floor and ceiling with M.S.Cleats and to be treated with anti termite oil. The measurement will be taken up to the false ceiling visible height in case of full height partition. The frame work will be claded with 9mm thick BWP plywood both sides and to be finished with 1.0mm laminate as per design with approved band adhesive. extra frame work to be fixed for fixing glass. In the glazed partition 12mm thick. modiguard/Saint Gobain clear float glass with Etching/sand blusting/granular blasting to be provided duly fixed with White beach/White ceader lipping 50mmx 25mm all complete duly natural polished and Melamine finish. Incase of Full height Partly glazed partition some portion to be raised as per drawing. The work should be completed as per specification, design & approval of the Architect. For the door 32mm solid core BWP flush door with a frame work of White beach/White ceader size 75mm x 62.5mm with necessary hold fast fixed to the wall/partition. Finished with 1.0MM laminate and lipping in all sides and 40mmx40mm white beach/white ceader wooden molulding to be provided along the periphery of the door frame. Supplying and fixing door accessory as door closure, brass hinges, Cylindrical/ Night latch locks and s.s.handle etc. 1.1 MAIN ENTRANCE FULL GLASS PARTITION 145.25 SFT Providing and fixing in position partly glazed Full Height Glazed Partition work as shown in the drawings in frame work at 50x100mm thick beach wood frame, glass 12mm thick toughened glass work as shown in the drawings with melamine polish, item including all necessary accessories, all labour charges, all taxes, complete for the finished item of work. 1.2 PARTLY GLAZED FULL HT. PARTITION AT MANAGER CABIN 164.63 SFT Providing and fixing in position partly glazed Full Height Partition work as shown in the drawings including door as shown in the drawings in frame work at 2’ x 2’ grid (horizontally and vertically) comprising of 2” x 2” saal wood Section and / or as per frame work shown in the drawings with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved shade and colours as hown in drawings. 1.3 SOLID PARTITION AT CASH COUNTERS, UPS AND RECORD ROOM WITH DOORS 283.27 SFT Providing and fixing in position solid full height partition ( 2½” thick) in frame work with saal wood vertical members at 2’ c/c and 3 horizontal members at equal distance comprising of 2” x 2 saal wood section with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved make and shade as shown drawings. complete for finished of work in all respects. 1.4 PARTLY GLAZED HALF HT PARTITION 192.00 SFT Providing and fixing in position partly glazed low height partition ( 2½” thick) in frame work with saal wood vertical members at 2’ c/c and 3 horizontal members at equal distance comprising of 2” x 2 saal wood section with 9mm thick BWP plywood on both sides finished with 1mm thick laminates of approved make and shade as shown drawings. Item to include 12mm thick glass Saint gobain make (clear / frosted) to be fixed as shown drawing. The exposed edges of the glass to be finished in mirror polish. Beech wood runner should be melamine polished in matching colour of laminate etc., complete for finished of work in all respects. 1.5 COVER FOR ROLLING SHUTTER 138.25 SFT Providing, fabricating and fixing cover for rolling shutter made of 2”x2” sal wood frame work spaced at 18” c/c both directions, fixing 19mm thick BWP Grade plywood and 1mm thick laminate (only out side) of approved shade with necessary locking arrangements. Separate flap door should be made for rolling shutter to operate. The Shutters should be provided with locking arrangement. 1.6 12MM THK TOUGHENED GLASS 65.00 SFT Providing & Fixing in position 12 mm thick toughened Glass at cash counter & Work Station Counters front side, including all necessary items, labour charges, all taxes etc., Complete for the finished item of work in all respects. 1.7 GRILL WORK AT CASH COUNTER TOP 44.00 SFT Aluminium Grill – Providing & Fixing of Aluminium Grills Glazed at Cash Counter. Made out of 2” x 2” hollow square frame section as directed. Work includes antirust coat & two coats of first quality enamel paint. All necessary Items, all taxes, Labour charges, etc., complete for finished of work in all respects. 2 DOORS 2.1 MAIN ENTRANCE DOOR 42.00 SFT Providing and fixing glass door for entry with 100mmx75mm beech frame wood work duly fixed with the partition/wall with hold fast duly polished. A white beach wood frame work size100mmx50mm as all round frame work with a decorative handle of 600mm of approved brand, floor spring Locks, etc all complete. 100mmx50mm thick stiles to be fixed on the frame 3 sides. 12mm thick toughened etched glass and Indian Bank logo frosted design with necessary sand blasting/granular blasting to be provided and edge should be machine bevelled polished. The work to be completed as per design and specification of the Architect all complete. The wooden portion to be duly melamine polished. 2.2 ATM ENTRANCE DOOR 21.00 SFT Fully glazed Ivory coloured powder coated Aluminum Shutter, hinged & mounted on floor spring of ISI make, with opaque film over Glass Door. There should be provision of standard MS rolling shutter finished with Red coloured Enamel paint of Asian/ British/ Berger of equivalent make. The rail of Rolling Shutter and top should be camouflaged by wooden box panelling whose exterior side to be finished with laminate as per above details. 2.3 MANAGER DOORS 42.00 SFT Providing, fabricating and fixing door frame in 2”x3” steam beach wood and fixing with frame of all round 5 x 2 steam beach wood frame of approved make. The door shall be glazed with 8 mm thick float glass fixed with beach wood beading of 12mm thick and having etching work (Etching cost considered @40/sft). Glazing portion of door shall be done in the same line / pattern as of the partition to which it is fixed. All open edges of door shall be leaped with beach wood beading and all wood to be finished with melamine polish. The door shall be fitted with door closer of approved make, 3 nos of heavy brass hinges, brush steel finish 6 lever mortise lock (set of three keys) and heavy door stopper, Union Bank of India bank logo of approved bank and all other fittings and fixture etc. complete and as per design and approval of Engineer-in-charge. 3.0 TABLES: Providing and fixing in position MANAGER table of size 6’-0” x 3’-0”, work station table (5-0x2-0), including Built in Storage (Credenza) by using 25 mm thick BWP plywood for top and 18mm thick BWP plywood for all other horizontal and vertical members Including Telescopic CPU Stand/ ready made keyboard tray shall be provided of approved model and make. Footrest made with T.W. member of size 4” x 1 ½” “finished with French polish. All exposed plywood surfaces to be finished with 1mm thick laminate of approved make & shade and all exposed edges of table top & ply verticals to have 1” x ¼” beech lipping. All exposed beech sections to be melamine and Internal surfaces to have white enamel paint as directed. Item to include plywood boxing, all necessary hardware and fittings in Stainless Steel finish, lipping to all edges etc. complete for the finished item of work in all respects. 3.1 MANAGER TABLE (6-0 x 3-0) WITH TABLE TOP GLASS 1 NO 3.2 WORK STATION TABLES (5-0 x 2-6) 2 NOS 3.3 WORK STATION TABLES (4-6 x 2-6) 5 NOS 4 SIDE UNIT 2 NOS Providing and fixing Side Unit/Back unit having top 18 mm thick plywood finished with 1mm thick laminate. The drawers to be made out of 19mm thick Make BWP plywood in the front cladded with 1.0mm laminate sides to be made out of 12mm thick BWP plywood and bottom made out of 6mm thick BWP plywood duly painted in matching tone and it should play on drawer sliding channels. The shutters to be made out of 19mm thick BWP plywood and should play on drawer sliding castors on powder coated channels. The necessary locks, handles, etc to be provided. 75mmx12mm wooden skirting to be provided duly polished as per matching tone all along the visible areas. Inside of the unit to be enamel painted in matching tone. All the exposed edges of the boards/ plywoods to be covered with wooden lippings/mouldings duly polished all complete. The work to be completed as per approval and specification of the Architect 5.0 CASH COUNTER (5-0 WIDTH) 1 NO Providing and fixing top 19mm thick plywood finished with 1mm thick laminate, and all other front & side of cash counter made out of 19mmthick BWP plywood as per design cladded with 1.0mm thick laminate on side and front & the edges to be finished with necessary white beach or white ceader lippings, mouldings, etc. Special 150mm drawer to be made for the cash with dividers of 12mm thick BWP plywood The front of the drawer made out of 19mm thick BWP plywood finished with 1.0mm laminate, sides 12mm thick BWP plywood and bottom to be made of 6mm thick BWP plywood. The inside and sides of the drawer to be duly polished. The drawers and shutters to be provided with necessary drawer sliding channels, hinges, locks etc. A foot rest to be provided made out of 19mm thick BWP plywood duly polished. Inside of the unit to be polished in the matching tone. All visible areas to be covered with white beach of white ceader lippings, mouldings with natural polish. Wire manager, CPU trolly, keyboard tray, tea tray to be provided 75mmx12mm white beach white ceader skirting to be provided with natural polish in all visible areas and 18mm thick Plain Glass to be provided at counter 2nd top customer face. counter top at 1100 mm level. The work should be completed as per specification. Size: 8-0 x 7-6 x 8-3 .... more in document
