Construction Of Demonstration Hall In Harbel Garden At Dsrrau,Jodhpur , Part - A Civil Work , Surface Dressing Of The Ground Including Removing Vegetation And Inequalities Not Exceeding 15Cm Deep And Disposal Of Rubbish Lead Up To 50 Mtr. And Lift Up To 1.5 Mtr. : All Kinds Of Soil , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Ofexcavated Earth, Lead Upto 50M Andlift Upto 1.5 M , Disposed Earth To Be Levelled And Neatly Dressed : All Kinds Of Soil , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils , Excavation Work By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains Not Exceeding 1.5 M In Width Or 10 Sqm On Plan Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Gettingout The Excavated Soil Anddisposal Of Surplus Excavated Soil As Directed With A Lead In A 50 Meter Including Stacking Of Useful Material If Available : , (A) Ordinary Rock , (B) Hard Rock(Blasting Prohibited) Useful Material 30% , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth Side Of Foundation Etc. In Layers Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering Including Lead Up To 50 Meter And With All Lift. , Supplying And Filling In Plinth With River Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete Including Cost Of Sand , Banking Excavated Earth In Layers Not Exceeding 20Cm. In Depth Breaking Clods Watering, Rolling Each Layer With 1/2 Tonne Roller, Or Stone Or Steel Rammers, And Rolling Every 3Rd And Top- Most Layer With Power Roller Of 8-10 Tonne Capacity And Dressing Up In Embankments For Roads, Flood Banks Marginal Banks, And Guide Banks Etc. Lead Up To 50 Mtr. And Lift Up To 1.5 Mtr. All Kinds Of Soils ( Without Watering And Rolling ) , Supplying Chemical Emulsionin Sealed Containers Including Delivery As Specified. Chlorpyriphos/Lindane Emulsifiable Concentrate Of 20% , Diluting And Injection Chloropyrifos Emulsifiable Concentrate 20% With 1% Concentration For Pre-Constructional Anti Termite Treatment As Per Is 6313 Part Iii As Amended From Time To Time And Creating A Continuous Chemical Barrier Under And Around The Column Pits, Wall Trenches, Basement Excavation, Top Surface Of Plinth Filling, Junction Of Wall And Floor Along The External Perimeter Of Building Expansion Joints, Over The Top Surface Of Consolidated Earth Of Which Aproch Is To Be Laid Surrounding Of Pipes And Conduits Etc. Complete As Per Specification (Plinth Floor Area Only Shall Be Measured For Payment And Excluding The Cost Of Chemical Emulsion) . , Carriage Of Materials -Earth, Sand ,Line Morrum, Manure Or Sludge, The Rates Are Inclusive Of Loading And Unloading For 5 Km , Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). , Providing And Laying In Position Specified Grade Ofcement Concrete Forall Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement. M20 Grade Nominal Mix / Design Mix Providing M-25 Grade Concrete By Usingcement As Per Codal Provision Instead Ofm-20 Grade Design Mix. , Providing And Laying In Position Specified Grade Ofcement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers (If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcementfor Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. M20 Grade Nominal Mix / Design Mix Providing M-25 Grade Concrete By Usingcement As Per Codal Provision Instead Ofm-20 Grade Design Mix. , Providing And Laying In Position Specified Grade Ofcement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcementfor Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix Providing M-25 Grade Concrete By Usingcement As Per Codal Provision Instead Ofm-20 Grade Design Mix. , Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation , Footings,Strap Beam, Raft , Bases Of Columns Etc. , Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Propsand Removal Of Formwork For Upto Floor Five Level For : Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates,Anchorblocks,Sills,Chhajjas,Lintel,Beam, Plinth Beam Etc. , Add Extra For Shuttering In Circular Work (In Respective Centering And Shuttering Items) , Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Propsand Removal Of Formwork For Upto Floor Five Level For : Columns, Pillars, Posts And Struts Etc. , Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. (Original Producers Who Manufacture Billet Directly From Iron Ores And Roll The Bilets To Produce Steel Conforming To Is:1786) Thermo-Mechanically Treated Bars (Conforming Of Relevent Is Code) , Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In :Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Vlevelusing Bricks Of Designation 75 Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) , Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In: Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Random Rubble Stone Masonry With Hard Stone In Superstructure Aboveplinth Level And Upto Five Levelabove 30Cm. Thick Walls In : Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Add Extra For Facing As Per Design And Detailed Specifications Including Additional Cost Of Stones , (A) Course Rubble Facing First Sort. , (B) Course Rubble Facing Second Sort. , Supplying And Fixing Machine Cut Fine Dressedred/Pink Sand Stone Dasa Orcoping,With Full Moulding If Required Laid On Cement Mortar 1:4 Including Pointing With Admixture Of Pigment Matching With The Stone Shade. 75 Mm Thick , Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) , 1501 Cm2 To 3600 Cm2 Tiles , Above 3601 Cm2 Slabs , Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). Extraforusingsize Above 200X300mm In Glazed Tiles And For Using 400Mm X 400Mm Mat Finishedtiles In Place Of 300Mm X 300Mm Size. , Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300mm Confirmingto Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4).Extraforusingsize Above 200X300mm In Glazed Tiles And For Using 400Mm X 400Mm Mat Finishedtiles In Place Of 300Mm X 300Mm Size. , P & F 1St Quality Heavy Duty Vitrified Double Charged Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness Minimum 10Mm) With Water Absortion Less Than Or Equal 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1: 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete. Size600 Mm X 600Mm , Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesinin Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A: 35 Mm Thick . Commercial Veneer Both Side Extra For Providing Other Type Of Fittings As Mention In Annexure A ( As Approved By Ei) : Stainless Steel Fittings , Providing And Fixing Is : 3564 Marked Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide , Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxideextra If Square,Rectangular Hollow Tubelarsections Are Used Or Grill Made By Flats Only , Providing And Fixing In Position Collapsible Steel Shutters With Vertical M.S. Channels 20 X 10 X 2Mm And Bracket With Flat Iron Diagonals 20 X 5Mm. Size With Top And Bottom Rail Of T-Iron 40 X 40 X 6Mm. With 40Mm Dia Steel Pulleys/Ball Bearing Complete With Bolts, Nuts Locking Arrangements Inside And Outside Stoppers, Handles Etc. As Per Specification Including Applying A Priming Coat Of Approved Steel Primer. (To Be Measured And Paid As Per Outer Dimension). , Providing And Fixing M.S. Sheet 1Mm Thicksingle Leaf Door Shutter In Angle Iron Frame 35X35x5mm Suitabilly Diagonally Braced With 25X3mm Flat Iron Above And Below Lock Rail Of Size 50X5mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint , Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150Mm Distance. , Grading Roof For Water Proofing Treatment Withwater Proffing Compoundcement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge) Includingfinishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : , Providing & Laying Broken Glazed Titles On Roof ( Broken Glazed Tilesnot Less Than 9 Kg/Sqm) On Top Of Hot Bitumen @ 1.7 Kg/Sqm. (1.40 Kg Ofvg-40 (30/40 )Grade And 0.30 Kg/Sqm. Ofvg-10 (80/100) Grade) And Joints Filled With Cement Mortar 1 :2 (1 Cement:2 Marble Dust Mixed With Water Proofing Compund All Complete As Per Direction Of Engineer-In-Charge. , Random Rubble Dry Stone Kharanja Under Floor. , Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : , 20Mm Thick. , 12Mm Thick. , 6 Mm Thick Cement Plaster To Ceiling Of Mix1:3 (1Cement : 3-Fine Sand) , Providing And Applying White Cement Based Puttyover Plastered Surface To Prepare The Surface Even And Smooth Completenew Plastered Surface (Three Or More Coats) , Pointingonstonemasonryincementsandmortar 1:3 (1 Cement : 3 Sand) : Deep Groove Pointing , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Newwork(Twoormorecoats)Overandincludingscrappingandprimingcoatwithcement Primer. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm ). , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Togive An Even Shade :Two Or More Coats On New Work , Providing And Fixingaluminum Workfor Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285,Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And Thedirections Of Engineer- In – Charge .(Glazing And Paneling To Be Paid For Separately). For Fixed Portion Anodised Aluminum (Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. (Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer) , Providing And Fixingaluminum Workfor Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285,Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And Thedirections Of Engineer- In – Charge .(Glazing And Paneling To Be Paid For Separately). For Shutters Builtup Standard Tubular Sections Of Openable Doors ,Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required (Lockes Shall Be Paid For Separately). Anodised Aluminum (Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. (Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer) , Providing And Fixing Glazing In Aluminium Door, Window ,Ventilator Shutters And Partitions Etc. With Pvs / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge.(Cost Of Aluminium Snap Beading Shall Be Paid In Basicitem.) With Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 13.50 Kg/Sqm) , Providing And Fixing Aluminium U Shape Handle Of Size 100Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-In-Chargeanodized (Ac 15 ) Aluminium , Providing And Fixing Expanded Grill Made Of Aluminum As Per Design And Drawing Having Members Section Of Size 7.5Mm X 6.0Mm And Opening Of Size 102Mm X 99Mm To Aluminum Window/Vent With Required Screws, Y And H Aluminium Section (As Per Drawing) At The Ends And Middle Joints Respectively Complete In All Respect As Per Direction Of Engineer In Charge. Anodised Aluminum (Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. (Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer) , Providing & Fixing Factorymade 100% Solid Wpc (Wood Polymer Composite) Door Frame 90Mm X 45 Mm ( Moulded ) Single Rebated,, Made From Wood Polymer Composite (Single Extruded Process) Material Comparising Of Virign Pvc Polymer Of K Value 58-60 ( Suspemsion Grade), Calcium Corbonate And Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk) And Nor Toxic Additives Fabricated With Meter Joints After Applying Pvc Solvent Cement & Screwed With Full Body Treaded Star Headed Srews Having Minimum Frame Density Of 780 Kg/ Cbm & Manufactured By An Iso 9001 - 2015 Certified Company, Having Good Screw Holding Capacity ( Screw Withrawal Strength Of 2200 N ( Face) & 1100 N ( Edge), , Supply And Installation Of Multi Rib Proofing/Cladding Sheet Manufacture Out Of0.50Mm Tct (Total Coated Thickness) High Tensile Zinc Aluminum Alloy Coated Galvalume Steel (As Per 150Gsm Zinc Aluminum Coated 550Mpa Tuekd Strength) Confirming To Is: 1397/Astm A-792 Sheet To Have Wide Pens 30Mm High Nb At 250 Centre And Centre Width Of 1020Mm Sheets Be Casted With Regular Modified Polyster System On A Continuous With Line On Centre For Face And With A Polyster Coating Respectively Sheet Shall Have Proportionality With Siphoned Plate Made To Prevent Leakage Sheet Shall Be Fixed By More Of Sell Drilling Lift Tapping Hot Dip Zinc Coated Hox Head Fasterner Of Size 12X14x55mm Long. The Sheet Shall Be Supplied In Cost One Length And For A Minimum Up To 12Mts With All Scaffolding. Add Extra For 0.80Mm Tct (Total Coated Thickness) High Tensile Zinc Aluminum Alloy Coated Galvalume Steel Sheet In Place Of 0.50Mm Thick , Part B Sanitary Work , P & F European Type White Glazed Vitreous China Ist Quality W.C. Pan (Is:2556 Mark) With P Or S Trap Including Cutting And Making Good The Wall And Floor. , P & F Lst Quality Wvc Urinal (Is:2556 Mark) With 25Mm Dia G.I. Waste Pipe, Dome Waste Couplings, Concealed Iron Brackets Or Screws Etc Complete. Flat Back (Small) Size 456X355x265mm. , P & F Water Closet Seat Covers With Brass Hinges Complete : Solid Pvc (Isi Marked) Grade-I White For Ewc. , P&F Jet Spray For Water Closet With C.P. Copper Tube Flange Of Approved Make , P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is:2556 Mark) Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is:1703 Mark) Complete Including Cutting And Making Good The Wall : Pvc With Pvc Bend As Per Is : 7231 , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 550 Mm X 400 Mm , P&F Towel Rail Or Ring Of Approved Quality /Make:C.P. Brass Towel Ring Revolving Type , P&F Soap Dish Or Tray Of Approved Quality/ Make.C.P. Brass Heavy And Superior Quality , P&F Beveled Edge Mirror Of Special Glass Of Appd Make (Atul/Equivalent) Complet With6mm Thick Asbestos Cemetn Sheet Ground Fixed To Wooden Scrwes & Washers.Size 600 X 450Mm X 4Mm Thick , P & F Pvc Storage Tank (Is:12701 Marked Indicating The Bis License No.) Of Approved Make With Cover, 25 Mm Dia 1 M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc. Complete Of Approved Design.1000 Litres Capacity. , P & F Pvc Storage Tank (Is:12701 Marked Indicating The Bis License No.) Of Approved Make With Cover, 25 Mm Dia 1 M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc. Complete Of Approved Design. 2000.0 Ltr. , Hoisting Charges For Each Floor : For Item 2.26.5 To 2.26.8 , P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make :Gun-Metal 25 Mm Nominal Bore. , P & F G.I. Pipes (Internal Work) With G.I. Fittings (Is:1239 Mark) & M.S. Clamps Including Cutting And Making Good The Walls And Floors : Concealed Pipe In Wall Incl. With Anticorrosive Bitumen Paint. : 20 Mm Dia Nominal Bore. B Class , (B) 15Mm Dia Nominal Boreb Class , Exposed On Wall : (A) 25 Mm Dia Nominal Bore B Class , P & F G.I. Pipes (External Work) With G.I. Fittings (Is:1239 Mark) Including Trenching & Refilling Earth Etc.25 Mm Dia Nominal Bore. B Class , Providing And Fixing Unplasticized Poly Vinyl Chloride (Upvc) Swr Pipes Type `B For Sciland Waste Dischareg System (Is : 13592: 1992 Marked) Of Approved Quality/ Make. (A) 110 Mm Dia , (B) 75 Mm Dia , Providing And Fixing Unplasticized Poly Vinyl Chloride (Upvc) Swr Pipes Fittings Type B For Sciland Waste Discharge System (Is:13592 : 1992 Marked) Of Approved Quality /Make (A) Bend 87.5 Dg. 110Mm Dia , (B) Wc Connector (Bend) With Ring 110Mm Dia , (C) Vent Cowel 100 Mm 110Mm Dia , (D) Door Bend 87.5 Dg. 110Mm Dia , (E) Pipe Clip 110Mm Dia , (F) Coupler 110Mm Dia , (G) Single Tee With Door 110 Mm. Dia. , (H) Bend 87.5 Dg. 75Mm Dia , (I) Door Bend 87.5 Dg. 75Mm Dia , (J) Single Tee With Door 75 Mm. Dia. , (K) Vent Cowel 75 Mm , (L) Pipe Clip 75Mm Dia , (M) Coupler 75Mm Dia , (N) Nahni Trap With Jali 4” 110Mm Dia , (O) Multi Floor Trap 110Mm Dia , Construction Of Cement Concrete Chamber 125Mm Dia.Cp Brass Grating , P & F Square-Mouth Gully Trap `A` Grade (Is :Marked) Of Approved Make Complete With C.I. Grating, Frame & Cover Masonary Chamber In C.M. 1:6, 100Mm Thick C.C. 1:5:10 Base Concrete, 40Mm Thick C.C.M-15 Grade Coping, 12Mm Thick Cement Plaster In Cm 1:3 Complete As Per Approved Design & Type.Trap Size 150 X 100Mm, 7.2 Kg. C.I. Cover With Frame, Internal Chamber Size 300 X 300Mm. , P & F S.W. Master Trap (Inter-Cepting) `A` Grade (I.S.: 651 Marked) Of Approved Quality/Make150mm Dia , Construction Of Manhole In All Type Of Soil Inner Size 90 X 60 Cm. Thick Masonry In Cm 1:6, 10 Cm. Thick Cement Concrete 1:5 10 In Foundation, 20 Mm Thick Inside Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring,Making Channels, 80Mm Thick Stone Slab Covering With 40Mm Thick M-15 Grade C.C.Flooring , 25 Kg. Ci Cover With Frame Of 40Mm Dia, Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within 50 Mtr. Lead.Depth Upto 0.5Mtr , Construction Of Chamber In All Type Of Soil With 300 Mm Thick Masonry In Cm 1:6 M 100Mm Thick C.C. 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade C.C. Flooring , Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inside Size 300X300mm Depth Upto 0.5M & 5Kg C.I. Cover With Frame , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii(4 Kg. /Cm.) Approved Quality /Makeincluding Joining The Pipe With Solvent Cement Rubber Ring And Lubricant : (A) 110Mm. Dia. , (B) 160Mm. Dia. , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: (A) Coupler (Socket) 110Mm Dia , (B) Bend 87.5 Degree 110Mm Dia , (C) Bend 45 Degree 110Mm Dia , (D) Pipe Clip 110Mm Dia , Providing Laying & Jointing R.C.C. Class Np-2 Non-Pressure Pipes (Is:458 Mark) Of Approved Make With Collars, Jointed With C.M.1 : 2 Or Having Spigot And Socket Ends With Flexible Rubber Rings Joint Including Testing Of Joints Etc. Complete .300Mm Dia Internal , Providing And Fixing Premium Quality Cp Brass Fittings Complete As Per Direction Of Engineer Incharge : Swan Neck Pillar Cock 15 Mm Nominal Size , Long Body Bib Cock 15 Mm Nominal Size , Angular Stop Cock With Long Thread 15 Mm Nominal Size , Revolving Type Towel Ring , Providing & Laying C.C. 1:3:6 (Stone Agreegate 20Mm Nominal Size) All Around Pvc Pipe Including 7.5 Cm Thick Bed Concerte [Width & Height =Dia Of Pipe In Cm+15Cm] Excluding Cost Of Pipe & Excavation Of Trenches Etc. Pvc Pipe 160 Mm Dia , Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick C.C Bed Of 1:5:10, M-15 Gradec.C Floor &Rcc Slab Covering With M15 Grade C.C. Floor,50 Mm Thick Stone Slab Partition Walls, 20 Mm Thick Plaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Stone Foot Rests Of Approved Design ,Two No. 450 Mm Dia Each Ferro Cementcover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr:-Size 230 X110 X150 Cm.(For 20 Users)With 115 Mm Thick Rcc (M-20) Slab With Tor Steel Reinforcement 10Mm F @15 Cm C/C Bothways Including Shuttering Complete In All Respect.
