supply of Investa Make H2so4 Unloading Pump And Spares-1 100009948 DRIP TRAY, P/N: 37, MOC: SS-304 2 100131662 BOLT (JAM NUT-IMPELLER ADJ.) SET, P/N: 35 3 100131663 BOLT (BEARING COVER-FRAME) SET, P/N: 34 4 100131664 NOZZLE, P/N:33 5 100131665 BOLT (SBCVR-BEARING FRAME) SET, P/N: 32 6 100131666 STUD / NUT (SBCVR-GLAND) SET, P/N:31 7 100190254 STUD/NUT-CASING SET, MOC: SS 316, P/N: 30 8 100131668 GASKET CASING TO STUFFING BOX COVER, P/N: 28 9 100131669 BEARING LOCK WASHER, P/N:26 10 100131670 OIL SEAL, OUTBOARD, 22X32X7 11 100131671 OIL SEAL, INBOARD, 30X72X8, P/N:24 12 100131672 KEY COUPLING, P/N:23 13 100131673 OIL BREATHER, P/N:22 14 100131674 DEFLECTOR, P/N:21 15 100020762 O-RING, PART NO: 20, MATERIAL: BUNA RUBBER 16 100001672 BEARING COVER, PART NO: 19, MATERIAL: C.I. 17 100131675 STATIONARY Unit, P/N: 18, MOC: Ceramic 18 100131676 IMPELLER SEAL RING, P/N: 17 19 100001882 BEARING LOCK NUT, PART NO: 16, MATERIAL: STEEL 20 100131677 BEARING OIL DRAIN PLUG, P/N: 15 21 100131678 BEARING FRAME, P/N: 14 22 100026254 RETAINING RING/CIRCLIP, PART NO: 13, MATERIAL: STEEL 23 100190253 BEARING OUTBOARD (3305), MOC: STEEL, P/N: 12 24 100190257 STATIONARY GASKET, MOC: PTFE, P/N: 11 25 100131679 OUT SIDE FLANGE, P/N: 10 and 10A 26 100131680 BEARING, INBOARD, 6306, P/N: 9 27 100131681 IMPELLER KEY, P/N:8 28 100030925 SLEEVE GASKET, P/N: 7A, MATERIAL: PTFE 29 100029909 SHAFT SLEEVE, P/N: 07, MATERIAL: ALLOY 20 30 100190255 ROTARY UNIT, P/N: 06, MOC: GFT, 31 100033664 SUPPORT FOOT, P/N: 5, MATERIAL: C.I. 32 100030316 SHAFT, P/N: 04, MATERIAL: SS-316 33 100190237 SULPHURIC ACID UNLOADING PUMP WITH MECHANICAL SEAL ALONG WITH BASE FRAME, WITHOUT MOTOR, PUMP TYPE: HORIZONTAL CENTRIFUGAL - SINGLE STAGE, IMPELLER TYPE: SEMI OPEN OR OPEN FLUID HANDLED: 98 % CONCENTRATED COMMERCIAL GRADE SULPHURIC ACID, DESIGN FLOW RATE: 10M3/HR DESIGN HEAD: 10MWC DESIGN TEMP: 60 DEG CENTIGRADE, M.O.C: CASING : CN7M (ALLOY - 20) IMPELLER : CN7M (ALLOY - 20), BACK PLATE: ALLOY 20 (CN7M), SLEEVE: ALLOY 20 (CN7M), SHAFT: ALLOY 20 (CN7M), SHAFT SS316, BEARING HOUSING: CAST IRON, FASTENERS: STEEL, MECHANICAL SEAL: TEFLON BELLOW TYPE GFT FACE V/s WITH CERAMIC, SUITABLE for an EXISTING MOTOR DETAILS: POWER: 3.7KW, RPM: 2875, FRAME: ND100L, VOLTS: 415+/- 10%, FREQUENCY: 50HZ, DUTY: S1 34 100190252 BASE FRAME FOR PUMP AND MOTOR
