Tender For Repairs To Steel Furniture At Arakkonam (Tender Id No. 2025_Mes_720379_1), arakkonam-Tamil Nadu

Tender For Repairs To Steel Furniture At Arakkonam (Tender Id No. 2025_Mes_720379_1); 1 CHAIR VARANDAH Drg No :FD 256 2 Removing of old unserviceable cane from Chair varandah, cleaning tubular surface and apply two coat of synthetic enamel white paint over a coat of red oxide and re canning with 4mm wide new plastic cane as per mat pattern,broken joints has to be welded and fix new rubber shoes for all the four legs as per drawing completely all as specifiedand as directed by the Engineer-in-Charge.Make of Cane : National Cane/Swastik/Shah 3 Removing existing unserviceable/rusted bottom oflegs(100 to 150 mm length)from chair verandah and supplying and fixing with new MS tube 12 mm dia 1.8mm thick (100 to 150mm length) duly welded and finished including two coats of synthetic enamel white paintover a coat of primercompletely all as specified and as directedby Engr-in-Charge. 4 CHAIRCBA STEEL WITH OUT ARMS Drg No:FD- 75(M) 5 Removing of existing damaged cane from seat of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah 6 Removing of existing damaged cane from back of steel chair without arms and re-canning with new plastic cane half round of size 2mm width and 4 mm for border strands only as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-Charge. Make :National Cane/Swastik/Shah 7 CHAIRCBA STEEL WITHARMS Drg No: FD-75(M) 8 Removing existing broken/damaged seat from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strandsas per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-ChargeMake :National Cane/Swastik/Shah 9 Removing existing broken/damaged back from steel tubular chair with arm and replacing with 1st class hard wood new seat frame duly canned with 2 mm width plastic cane and 4 mm for border strandsas per Godrej pattern including two coats of black enamel painting over a coat of primer as per drawing completely all as specified and as directed by Engr-in-Charge Make :National Cane/Swastik/Shah 10 Removing existing unserviceable wooden handles of chair tubular with arms and supply and fix with new wooden handles made out of 1st class Hard Teak wood & fixing with suitable screws including applying two coats of black synthetic enamel paint over a coat of primer of approved make as per drawing completely all as specified and directed by Engr-in-Charge 11 ALMIRAH LARGE STEEL/GLAZEDDrg No :FD-1031/104/67 12 Removing existing unserviceable components from Almirah large/glazed steel and supplying and fixing new components as per drawing completely all as specified and directed by the Engineer-in-Charge as elaborated below 13 MS lock of size 65mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej. 14 Shelves made out of MS sheet of 1 mm thick duly paintedwith two coats of synthetic enamel over a coat of redoxide 15 Leg(Each) of steel almirah large/Glazed made out of MS sheet 1mm thick to be welded including applying two coats of synthetic enamel paint over a coat of red oxide 16 MS clamps with bolt and nuts etc to fix the shelves 17 3way Locking alignment with rod 18 Glass panes 3.5mm thickMake : Modi Guard/Atul/Saint Gobin Note : Each portion of the door will be measured seperately).Drg No.FD-104 19 CP steel handle of size 100 mm long including provision of suitable nut and washers Make: Harrison 20 ALMIRAHMEDIUM STEEL/GLAZEDDrg No :FD-1032/104/243 21 Removing existing unserviceable components from Almirah Medium/glazedsteel and supplying and fixingfollowing new componentsas per drawing completeall as specified and directed by the Engineer-in-Charge 22 MS lock of size 65mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej. 23 Shelves made out of MS sheet of 1 mm thick duly paintedwith two coats of synthetic enamel over a coat of redoxide 24 Leg(Each) of steel almirah large/Glazed made out of MS sheet 1mm thick to be welded including applying two coats of synthetic enamel paint over a coat of red oxide 25 MS clamps with bolt and nuts etc to fix the shelves 26 3way Locking alignment with rod 27 Glass panes 3.5mm thickMake : Modi Guard/Atul/Saint GobinNote : Each portion of the door will be measured seperately).Drg No.FD-104 28 CP steel handle of size 100 mm long including provision of suitable nut and washers Make: Harrison 29 RACK SIX TIER /3 TIER STEEL Drg No:FD- 1038/106 30 Removing existing unserviceable shelves from Rack six tier steeland supplying and fixing new shelves made out of MS sheet 1 mm thick and 02 Nos V angle shall be provided at botttom of the shelves to get more strength including nuts bolts along with two coats of synthetic enamel OG paint over a coat of red oxide as per drawing completely all as specified and as directed by the Engr-in-Charge 31 Removing existing unserviceable iron angle from Rack six tier steel and supply and fix new iron angle of size 40x40 mm x 4mm thick as per drawing completely all as specified and directed by the Engineer-in-Charge 32 TABLE OFFICE OFFICER STEEL Drg No:FD- 1003/1002 33 Removing existing unserviceable components from Table office officer steel and supplying and fixing following new componentsas per drawing completely all as specified and directed by the Engineer-in-Charge 34 Top made out of Prelaminated particle board of size 1800x1200x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished incuding tightening the frame Make : Green ply/Century/Archid ply Drg No-FD-1003 35 Top made out of Prelaminated particle board of size 1620x870x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished including tightening the frame. Make : Green ply/Century/Archid ply Drg No-FD-1002 36 MS lock of size 50mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej. 37 Drawer made of 1 mm thick MS sheet duly painted with two coat of synthetic enamel over a coat of red oxide and grooves should be lubricated for smooth movement. 38 Hard rubber shoes for legs as approved by Engr-in-charge 39 TABLE OFFICE CLERK STEEL Drg No: FD-1004/84 40 Removing existing unserviceable components from Table office clerk steel and supplying and fixing following new componentsas per drawing completely all as specified and directed by the Engineer-in-Charge 41 Top made out of Prelaminated particle board of size 1200 x 610 x18 mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading all round duly polished incuding tightening the frameMake : Green ply/Century/Archid ply Drg No-FD-1004 42 MS lock of size 50mm, 6 levers of Godrej Pattern with stainless keys in duplicate. Make: Harrison/ Link/Godrej. 43 Drawer made of 1 mm thick MS sheet duly painted with two coat of synthetic enamel over a coat of red oxide and grooves should be lubricated for smooth movement. 44 Hard rubber shoes for legs as approved by Engr-in-charge 45 FOAM WITH/WITH OUT BACK Drg No : FD-77/1027 46 Removing the existing Broken/damaged seat planks of Form without back and supplying & fixing with new planks of size 1525x255x25mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directedby Engr - in-Charge 47 Removing the existing Broken/damaged seat planks of Form with back and supplying & fixing with new planks of size 1800x255x25mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directed by Engr-in-Charge Drg No : FD-78/1027 48 Removing the existing Broken/damaged back planks of Form with back and supplying & fixing with new planks of size 1800x150x19mm of 1st class hardwood teak wood with suitable full threaded nuts and bolts including two coats of french polishing as directed by Engr-in-Charge Drg No : FD-78/1027 49 Removing the existing unserviceable square tube of size25 mm x 1.8 mm thick &supplying and fixing by welding in Table office officer/clk/3x3/3x2/Dining ORs/form with/without back including two coats of synthetic enamel paint over a coat of red oxide as per drawing completely all as specified and as directed by Engr-in-ChargeNote : Welding shall be measured separately 50 Welding in repairs to Steel furniture length of welding exceeding 1cm but not exceeding 5cm all as specified and as directed by the Engineer-in-Charge. 51 Welding in repairs to steel furniture length of welding not exceeding 1cm all as specified and all as specified and as directed by the Engineer-in-Charge. 52 TABLE DINING OR’s Drg No: FD-165(M) 53 Removing of existing unserviceable top of table dining ORs and replacing the same with new 18mm thick BWR plywood and the same shall be covered with new aluminium sheet of 22 gauge thick with size of table and 50 x 75mm lapping to be given all around the table completely and shaking portion of mild steel frame to be welded and the entire steel frame be painted with two coat of synthetic enamel black paint over a coat of red oxide etc., asper drawing completely all as specified and as directed by Engr-in-Charge.Make : Green ply/Century/Archid ply 54 TEAPOY VARANDAH Drg No :FD-255 55 Removing the unserviceable top of Teapoy Verandah and replacing with new prelaminated particle Board of size (900 x 450)mm & the frame to be painted with two coat of synthetic enamel white paint over a coat of red oxide etc as per drawing completely all as specified and as directed by Engr-in-Charge.Make : Green ply/Century/Archid ply 56 PVC shoes for legs as approved byEngr-in-Charge 57 LOCKER STEEL Drg No: FD -1029/257 58 Welding the broken hinges 75mm long of lockers steel by running welding (each door) as per drawing completely all as specified and as directed by Engr-in-Charge 59 Removing existing unserviceable legs and replacing with new legs made out of 1mm thick MS sheet made to shape as shown in the drg and applying two coats of OG paint (enamel) over a coat of red oxide primer over replaced portion of Locker steelas per drawing completely all as specified and as directed by Engr-in-Charge 60 Removing old broken damaged hasp & staples of locker steel and supplying & fixing new hasp & staples of size 150 mm long made of CP steel to the shutters of locker steel all as specified & directed by Engr-in-charge 61 Removing old broken hanging rod of locker steel and supplying & fixing new hanging rod of 500mm long made out of 20mm dia chromium plated pipe of locker steel all as specified & directed by Engr-in-charge 62 CHAIR EASY STEELWITH CUSHION Drg No: FD -358 63 Removing existing unserviceable components from chair easy steel with cushion and supplying and fixing following new componentsas per drawing completely all as specified and directed by the Engineer-in-Charge 64 Foam 50 mm thick of 40 density for Seat duly stitched with rexin 65 Foam 50 mm thick of 40 density for Back duly stitched with rexin 66 Plywood 12 mm thick for Seat Make : Green ply/Century/Archid ply 67 Plywood 12 mm thick for Back Make : Green ply/Century/Archid ply 68 Arm rest made out of 1st class hard wood teakwood duly polished 69 CHAIR SCHOOL WITH HAND BOARD Drg No : TP 70 Removing existing unserviceable components from chair school with hand board and supplying and fixing following new componentsas per drawing completely all as specified and directed by the Engineer-in-Charge 71 Foam 50 mm thick of 40 density for Seat duly stitched with rexin 72 Foam 50 mm thick of 40 density for Back duly stitched with rexin 73 Ply wood 12 mm thick for SeatMake : Green ply/Century/Archid ply 74 Ply wood 12 mm thick for Back Make : Green ply/Century/Archid ply 75 Arm rest made out of 1st class hard wood teakwood duly polished 76 CHAIR COPOLYMER Drg No: TP 77 Removing existing unserviceable/broken seat from chair copolymer seat and supply and fix with new seat Nilkamal or Equivalent model No 1 Chair-II and applying one coat of black enamelled paint on steel portions as per drawing completely all as specified and as directed by Engr-in-Charge 78 LOCKER FLYING CLOTH Drg No:SD-1365 79 Removing existing unserviceable MS lock from flying locker cloth and supply and fix new 6 lever brass lock with duplilcate keys as per drawing complete all as specifiedand as directed by Engr-in-Charge Make of Lock: Godrej/Harrison/Link. 80 TABLE 900 X900X 760mm STEEL Drg No: FD-1009 81 Removing existing unserviceable top from table 900x900 mm steel and supplying & fixing new top made out of Prelaminated particle board of size 900x900 mm &18mm thick exterior grade & edges shall be covered with 4 mm thick teak wood beading duly polished as per drawing complete all as specifiedand as directed by Engr-in-Charge Make : Green ply/Century/Archid ply 82 TABLE 900 X600 X 760mm WITH /WITH OUT DRAWER Drg No: FD-1008,1007 83 Removing of old unserviceable top of table 900 x600mm w/drawer steel and supplying & fixing new top made out of 18/19 mm thick pre-laminated particle board exterior grade with one side teak veneered finish and other side having balancing white lamination & providing 4mm thick teakwood beading all around the top and the wooden frame to be duly polished complete all as specified and as directed by Engr-in-charge Make : Green ply/Century/Archid ply 84 BOOK CASE STEEL Drg No:FD-90(M) 85 Removing of old & unserviceable glass shutter including locksfrom book case steel and supplying & fixing new glass & lockwith 6 lever of approved quality wih duplicate keys 50 mm of Godrej Pattern and repairing of shutter frame glass androlling accessories before fixing of glass shutter complete all as directed and shown on drg. Make of Lock: Godrej/Link/Harrison & Make of glass : Modiguard/Atul/Saint Gobain 86 Removing of old unserviceable handle of book case steel and supplying & fixing new chromium plated handle of approved quality all as specified and shown on drg 87 File Cabinet FD-397 88 Removing of existing unserviceable lock from Filing Cabinet and supplying and fixing new 6 lever brass lock with duplilcate keys as per drawing after repairing all 4 drawers of the cabinets including replacement of sliding rollers complete all as specifiedand as directed by Engr-in-Charge Make of Lock: Godrej/Harrison/Link. 89 TABLE BED SIDE MAP (FD/E6/MAP/15 ( R) 90 Removing old unserviceable legs,rails and supplying & fixing new MS square pipe of size 16mmX16mm square & thickness of wall not less than 16mm guage including welding and painting complete all as directed & specified by Engr-in-charge. 91 Removing old unserviceable top of table bed side and supplying & fixing new top made of 16 mm thick prelaminated particle board exterior grade Make : Green ply/Century/Archid ply ISI marked one side teak face and other side balancing white as per existing shape and size including standard PVC edging (min thickness 1.6mm) shall be provided all round in tops as per existing shape with headless nails completely. 92 Removing old unserviceable drawer and supplying & fixing new upper drawer as per existing shape and size front of drawer shall be 12mm thick prelaminated particle board exterior grade Make : Green ply/Century/Archid ply and sides and back of drawer shall be made of 12mm thick commercial plywood BWR quality Make : Green ply/Century/Archid ply and bottom of drawer shall be provided with 6 mm thick commercial plywood BWR quality as per existing shape and size complete. 93 Removing old unserviceable back of table bed side and supplying & fixing new back made of 6 mm thick commercial plywood BWR Make : Green ply/Century/Archid ply as per existing shape and size complete. 94 RACK SIDE 2/3 SPACE WITH TRAY STEEL 95 Removing old unserviceable legs of rack steel and supplying & fixing new legs of MS steel and fixing iron angle completely by mean of welding and applying one coat of synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of new steel surface completely as specified and directed by Engr-in-charge. 96 Removing old serviceable steel shelves and supplying & fixing new shelves of existing shape and size made out of 20 gauge PGI sheet & fixing completely by means of bolting/welding or riveting etc including one coat of synthetic enamel paint (spray painting) over one coat of red oxide primer alongwith preparation of new steel surface complete all as specified and directed. 97 Bed hard steel Drg No : FD/E6/MAP/08 98 Removing of unserviceable/broken plywood from bed and providing new plywood of commercial type 12mm thick 7 ply of BWR grade and conforming to IS 303 of 1975 and all as as per drg & directed by Engr-in-charge.

INR 500 /-

INR 53800.0 /-

INR 26.90 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB