Tender For Repair / Maintenance Of Sunken Portion Of Kitchen, Ductshaft, Bathroom Etc In Zone-Ii Area Under Age B/R-Ii Of Ge Jaipur.; 1 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed. 2 M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 3 M&L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. 4 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete allas directed. 5 M&L for Renewing Non skid ceramic tile in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles in 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note : Quoted rate shall inclusive of new tile required. 6 M&L for coloured glazed ceramic tiles 450mm X 300mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed 7 M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed 8 S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge 9 S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge 10 S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge 11 S&F 40 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge 12 Taking up or down 15mm bore steel tubing and connections from vertical shafts upto 28m height incl necessary T&P required including cleaning for refixing or removalcomplete all as specified and directed. 13 ,---ditto--- all as per item No. 12 above but 20mm bore tubing complete all as specified and directed. 14 ,---ditto--- all as per item No. 12 above but 25mm bore tubing complete all as specified and directed. 15 ,---ditto--- all as per item No. 12 above but 40mm bore tubing complete all as specified and directed. 16 Fixing only 15 mm bore old steel water tubing and connections in new or old positions fixed to walls, ceiling or in floor etc of vertical shafts upto 28m height incl necessary T&P required incl new fittings complete all as specified and directed. Note : (i) Steel tubing obtained from dismantling shall be used under this item(ii) Quoted rate shall be included new fitting 17 ,---ditto--- all as per item No. 16 above but 20mm bore tubing complete all as specified and directed. 18 ,---ditto--- all as per item No. 16 above but 25mm bore tubing complete all as specified and directed. 19 ,---ditto--- all as per item No. 16 above but 40mm bore tubing complete all as specified and directed. 20 S&F in repairs vitreous china wash hand basin, white, flat back of size 630 x 450 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. 21 S&F in repairs vitreous china wash hand basin,l white, flat back of size 450 x 300 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. 22 Supply only 15mm bore pillar tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed. 23 S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. 24 S&F in repair SS Grating doom 125 mm dia with or without waste hole complete all as specified and as directed. 25 S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. 26 S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed 27 S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and including waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed. 28 S&F in repair 32mm bore (dia of discharge pipe) waste coupling of stainless steel (half or full threaded) complete all as specified and directed. 29 S&F urinal spreader of Stainless steel any colour for fixing with 15 mm dia pipe complete all as specified and directed. 30 Labour only for carefully dismantaling the existing complete plumbing and sanitary sanitary fitting comprising of WHB with brackets, pillar tap, bathroom corner set, shower rose, wall mixture, EWC, angle cock, looking mirror, waste pipe, PVC connection, flushing cistern, washbasin, bib tap, coupling, grating, towel ring/rod, health faucet etc from toilet & bathrooms and refixing the same after sunken treatment of bathroom and toilet including new CP brass screws complete all as specified and directed. 31 M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 incl mixed with and incl liquid water proofing compound @ 150 ml per bag of cement. (ii) Applyying two coats of pitch free polyurethane elastomeric single compound liquid membrane with UV resistence, approx thickness oflayer (1-2mm)(in two coat of min 600 micron each ) with coverage of 0.94 kg per sqm in each coat complete all as specified and directed by Engineer-in-charge with following specification of liquid membrane (i) Elongation 400%ASTMB-412 (ii) Tensile strength-2.10 Mpa ASTMD-412 (iii) Crack bridging at low temp-1.5mm ASTMC-836including preparation of surface and filling cement concrete 1:4:8 type D2 (40mm graded aggregate) ,including demolition existing sunken treatment complete all as specified an as directedNote :-(i) liquid membrane water proofing membrane shall be laid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii)Above aspects are deemed to be included in quoted rate and 50mm PVC spout pipe for excess drainage board. (iv) Liquid waterproofing also included under this item only Note : Floor area only will be measured for payment purpose. 32 Supply & fixing in repair vitreous china squatting pan, Orissa patteren, size 580 x 440 mm, white, with integral foot rests including P or S trap (excluding flushing cisteren and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete but including trap set in concrete incl seat and cover for pedestal pan, flush pipes to pedestal pan, including all joints and making good to the floor complete all as specified & directed. 33 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. 34 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. 35 S&F in repairs PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed. 36 S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 37 S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 38 Taking down eaves gutters, sanitary PVC pipes and rainwater pipes, cast iron pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 39 S&F 100mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ 40 S&F 75mm bore Cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and directed.Note: Payment of each lead joint paid seperately under respective item of BOQ 41 Extra over of 100mm bore cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed. 42 Extra over of 75mm bore cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed. 43 S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. 44 S&F 110 mm bore UPVC (SWR) pipes (type A conforming to IS-13592) single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. 45 S&F 110 mm dia UPVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed. 46 S&F 110 mm dia UPVC (SWR) bends with oval access door any radius complete all as specified and as directed. 47 S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. 48 S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. 49 S&F 100mm bore cast iron bends (any radius) with ducks foot or heel rest complete all as specified and as directed. 50 S&F 75mm bore cast iron bends (any radius) with ducks foot or heel rest complete all as specified and as directed. 51 S&F 75mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. 52 S&F 100mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. 53 S&F 100mm bore cast iron ‘P’ or ‘S’ trap including fixing complete all as specified and as directed. 54 M& L in repair for 75mm bore Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. 55 S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old tank complete all as specified in SSR Part I and directed by Engr in charge. 56 S&F in repair 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed 57 S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed 58 S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. 59 Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick, 18 guage of Grade SS-304, kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. 60 Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed 61 M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. 62 M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping of 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified complete all as specified and directed.Note : (i) Payment for providing grooves shall be made separately under respective item of BOQ 63 M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge 64 M&L for preparing newly plastered surfaces of wall, AC sheet, RCC jallies etc and applying two coats of distemper with distemper oil emulsion white or tinted complete all as specified and directed. 65 S& F in repair of pipe supporting clamping System consists of Profile Bracket + continous Slotted C Channel + U Bolt rubber sleeve mounted, system for 03 Nos 110mm dia PVC pipe in Toilet Duct for soil water down take pipe from terrace to ground floor running Vertical fixed line with wall distance 4.Pipe support clamping made of 1.Profile Bracket having wall distance 100mmof low carbon Hot Roll Gauge Corrected (HROP D) Steel (IS 1079) material size 32mm x 3 mm with ribs and notch are Hot Dip +Zn AI flake coated with flange bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DNI 6921 and SS 304 Hex Flange Nut BSW 5/16x 18x8x13 with serration as per DIN 6923 flange nut are Zn AI flake coated. 2. Slotted C Channel B3 Type to be used of Size 508mm (20 ) made of low Carbon continuous slotted C channelwith ribs made of Low Carbon Hot Roll Gauge Corrected (HROP D) steel (IS 1079) are hot Dip+Zn AL flake coated with material thickness of 3mm. 3. U bolt R/M are made of Low Carbon Mild steel with Rod diameter 7mm approx;Zn Al Flake coated with noise absorbing transparent rinbbedsilicon rubber sleeves;with flange nut BSW 5/16x 18x8x13 with serration as per DIN 6923set having natural serration-Zn AI coated flake.Material Qty one unit:1 Profile bracket(wall distance 4)-02 Nos. 2. Slotted C Channel ofSize 508mm (20)- 01 Nos 3. U Bolt rubber sleeve mounted for 110mm dia PVC Pipe Dia -3 No.4. Fixing Nail Zn coated ofthickness 6.5mm and length 63mm (2 1/2)-4 Nos(Pipe Support clamping unit fixing to be done at every metre diatane in the duct as specified in the Technical drawing of CE Jaipur Zone TD No. TD/2022/01) 66 S& F in repair of pipe supporting clamping System consists of Profile Bracket + continous Slotted C Channel + U Bolt rubber sleeve mounted, system for 07 Nos GI Pipe- 15-40mm from terrace to ground floor running Vertical fixed line with wall distance 4. Pipe support clamping made of 1.Profile Bracket having wall distance 100mm of low carbon Hot Roll Gauge Corrected (HROP D) Steel (IS 1079) material size 32mm x 3 mm with ribs and notch are Hot Dip +Zn AI flake coated with flange bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DNI 6921 and SS 304 Hex Flange Nut BSW 5/16x 18x8x13 with serration as per DIN 6923 flange nut are Zn AI flake coated. 2. Slotted C Channel B3 Type to be used of Size 508mm (20 ) made of low Carbon continuous slotted C channelwith ribs made of Low Carbon Hot Roll Gauge Corrected (HROP D) steel (IS 1079) are hot Dip+Zn AL flake coated with material thickness of 3mm. 3. U bolt R/M are made of Low Carbon Mild steel with Rod diameter 7mm approx;Zn Al Flake coated with noise absorbing transparent rinbbedsilicon rubber sleeves;with flange nut BSW 5/16x 18x8x13 with serration as per DIN 6923set having natural serration-Zn AI coated flake.Material Qty one unit:1 Profile bracket(wall distance 4)-02 Nos.2. Slotted C Channel ofSize 508mm (20)- 01 Nos 3. U Bolt rubber sleeve mounted for 15-40mm dia GI Pipe -7 No. 4. Fixing Nail Zn coated ofthickness 6.5mm and length 63mm (2 1/2)-4 Nos (Pipe Support clamping unit fixing to be done at every metre distance in the duct as specified in the Technical drawing.Refer CE Jaipur Zone Tecnical Drawing No. TD/2022/01) 67 S&F 110 mm uPVC (SWR) vent cowl complete all as specified and directed. 68 S& F in repair of pipe supporting clamping System consists of Profile Bracket + continous Slotted C Channel + U Bolt rubber sleeve mounted, system for one PVC 110mm dia in Toilet Duct for soil water down take pipe from terrace to ground floor running Vertical fixed line with wall distance 4.Pipe support clamping made of 1.Profile Bracket having wall distance 100mmof low carbon Hot Roll Gauge Corrected (HROP D) Steel (IS 1079) material size 32mm x 3 mm with ribs and notch are Hot Dip +Zn AI flake coated with flange bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DNI 6921 and SS 304 Hex Flange Nut BSW 5/16x 18x8x13 with serration as per DIN 6923 flange nut are Zn AI flake coated. 2. Slotted C Channel B3 Type to be used of Size 508mm (20 ) made of low Carbon continuous slotted C channelwith ribs made of Low Carbon Hot Roll Gauge Corrected (HROP D) steel (IS 1079) are hot Dip+Zn AL flake coated with material thickness of 3mm. 3. U bolt R/M are made of Low Carbon Mild steel with Rod diameter 7mm approx;Zn Al Flake coated with noise absorbing transparent rinbbedsilicon rubber sleeves;with flange nut BSW 5/16x 18x8x13 with serration as per DIN 6923set having natural serration-Zn AI coated flake. Material Qty one unit:1 Profile bracket(wall distance 4)-02 Nos. 2. Slotted C Channel ofSize 508mm (20)- 01 Nos 3. U Bolt rubber sleeve mounted for 110mm dia PVC Pipe -1 No. 4. Fixing Nail Zn coated ofthickness 6.5mm and length 63mm (2 1/2)-4 Nos(Pipe Support clamping unit fixing to be done at every metre distance in the duct as specified in the Technical drawing of CE Jaipur Zone TD No. TD/2022/01) 69 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule A/BOQ
