Tender For Material Supply Tender Mg Narega Schems 2025-2026 - Ghadla/Kankar/Jhajhra2 Mortar-soil/mud masala3 Lime from Kali kiln for masonry work4 Cement PPC5 White Cement6 Fine Aggregate Sand/Grabble7 Fly Ash8 Surkhi9 Stone Dust (In Masonry Work)10 Ballast Stone/Brick (For Other than Road work) 40mm measured stone (Grit broken by hand) (Cut voids 1/11)11 40mm stone (Broken by crusher) (Cut voids 1/11)12 20mm stone (Broken by crusher)13 12/10/6mm stone (Broken by crusher)14 Brick ballast15 Material for Road Work (Including 5 Km. Lead) 63-40mm stone crushed stone (Cut voids 1/11)16 63-40mm stone crushed stone (Cut voids 1/11)17 90-45 mm. Hand broken stone aggregate(Cut voids 1/11)18 Quarry rubbish(Cut voids 1/6)19 Gravel(Cut voids 1/6)20 Kankar(Cut voids 1/6)21 Binding material (PI 4-6)(Cut voids 1/6)22 Brick (22.5 X 11 X 7.50 cm) I st class23 II class24 Soling/ Kharanja/ Masonry stone Masonry Beradda (RR)25 Masonry Radda (CR)26 Kharanja soling (for flooring work upto 15cm height)27 Kharanja soling (for road/ Kharanja work upto 23cm height)28 Jodhpuri type stone strips/arches/cuts (length 2-3, width 10-12, thickness 2.5-3.5)29 Stone chips (Flaky Material)(3-4 Thick & Length and Width 1-2)30 Sandstone(DPC,Sill,Coping,Lintel,Tand,Almirha etc)Upto 25mm thickness31 25-40mm thickness32 Upto 40-50mm thickness33 Upto 50-75mm thickness34 Upto 75-100mm thickness35 Upto 100-150mm thickness36 Flooring/Strip Patan Katla StoneFlooring slabs upto 35mm Thick, min. 3 sqft or more Area37 Strip Patan slabs 60-75mm Thickness, min. 3 sqft or more Area38 Unpolished Rough Kota StoneUpto 900 sq.cm39 901 to 2300 sq.cm40 Above 2300 sq. cm41 Polished Kota Stone(One side polished)Upto 900 sq. cm42 From 901 to 2300 sq. cm43 Above 2300 sq. cm44 Marble Stone(Makrana Adanga 20mm thick)Upto 900 sq. cm45 From 901 to 2300 sq. cm46 Above 2300 sq. cm47 Marble Chips48 Marble Powder49 Marble Stone(Rajnagar II Quality/Local 20mm thick)Upto 901 to 2300 sq. cm50 Upto 900 sq. cm51 Above 2300 sq. cm52 Stone FrameSingle Paitaam Size 100 X 75 mm.53 Double Paitaam Size 125 X 75 mm.54 Stone Straps Up to 1.5 m Length, Minimum 40mm thick55 1.5 m to 2.40 m Length, Minimum 50mm thick56 2.4 m to 3.0 m Length, Minimum 65mm thick57 Above 3.0 m Length, Minimum 75mm thick58 Precast Tiles / Blocks Glazed Size-30X45 cm59 Mosaic Size-40mm Thick60 Vitrified Size-60X60 cm61 Interlock Tiles/Brick/Block for Road Work Cement Interlocking Block M-30grade, 60mm Thick62 Cement Interlocking Block M-30grade, 80mm Thick63 Cement Interlocking Block M-30grade, 100mm Thick64 FR PVC Insulated Copper Conductor Single Core Cable ISI Marked1.50 Sq. mm65 2.50 sq. mm66 0.50 sq. mm67 1.00 sq. mm68 4.00 sq. mm69 6.00 sq. mm70 Local wood with fittings (for doors, windows and furniture) Mango71 Acacia72 Others73 Factory made doors (30 mm thick, solid core single leaf)74 Structural steel Iron (Tor steel Fe 415/500 for reinforcement)75 Winding wire 18 gauge76 Iron girders77 Conia iron/ square bar/ leaf/ angle iron78 Barbed iron wire (Size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage79 MeshIron Mesh (24 Gauge, 14 Mesh)80 Cement Concrete Mesh Akash Patal 40 mm Thick81 Glass3 mm thick glass82 PaintEnamel Paint83 Distemper (Water Bound)84 Lime - For Painting (Aras / Kali)85 Primer (For Iron / Wood)86 Petroleum Product Diesel HSD87 Movil Oil88 Bitumen Shalitex Board (25 mm Thick)89 Plain Sheet (Plain Sheet)GI Sheet 22 Gauge (0.80 mm)90GI Sheet 24 Gauge (0.63 mm)91MS Sheet 22 Gauge (0.80 mm)92MS Sheet 24 Gauge (0.63 mm)93 Corrugated Sheet GI Sheet 1mm thick94 GI Sheet 22 Gauge(0.80 M.M.)95 Asbestos Cement Sheet 6mm(2.5/2.75X1m)96 Other Sheets PVC Sheet 1mm thick (Coloured/Plain)97 Green Yellow Literof Expo Sheet(183X90)98 Pipe GI 15mm Diameter(B Class)99 GI 20mm Diameter(B Class)100 GI 25mm Diameter(B Class)101 A.C. 75mm Diameter102 A.C. 100mm Diameter103 P.V.C. 90mm Diameter Diameter(with ring)104 PVC 110 mm. Diameter(with ring)105 PVC 140 mm. Diameter(with ring)106 PVC 110 mm.(2.5kg/sq.cm) with coupler107 Sanitary Indian W.C.108 Orrisa W.C.109 European W.C.110 Foot Rest111 Porcelain Urinal 430*350*300 mm with coupler, bracket and PVC waste pipe112 Wash-Basin 450*300 mm with coupler, bracket and PVC waste pipe113 Stone furnace (S.W.) pipe 100 M.M. diameter, 0.6 m long114 C.P.Pillar Cock (dia 15 mm) (IS Mark)115 CP Bib Cock (dia 15 mm)(IS Mark)116 125 mm diameter CP grating117 RCC NP3 Hume Pipe with Collar 1200mm Dia118 1000mm diameter119 750mm diameter120 600mm diameter121 450mm diameter122 300mm diameter123 Steel Conduit ISI Marked 20 mm. Diameter124 25 mm Diameter125 fArcol126 P.V.C. Water Tank with Cover (Conforming to IS:12701-1989)127 13/0.20 mm Twin core PVC sheathed, flat flexible copper cable128 Steel fasteners 6 mm x 75 mm129 PVC Conduit ISI Marked 25 mm Diameter130 20 mm Diameter131 Junction Box 20 mm Two way132 20 mm, One way133 25 mm Two way134 20 mm One way (PVC)135 Module GI Box for 3 modules136 for 2 modules137 Module Base & Cover Plate for 2 modules138 for 3 modules139 Modular Switch One way, ISI Marked SP 15/16 Ampere140 SP 5/6 Ampere141 Modular Socket Outlet, ISI Marked3 pin 5/6 Ampere142 6 pin 15/16 Ampere143 MCB DB2+2 way, SPN, single door144 2+4 way, SPN, single door145 2+6 way, SPN, single door146 GI Pipe (Medium Grade)15.00 mm Diameter147 40.00 mm Diameter148 Copper Wire 8 SWG (4.00 mm Diameter) (0.117 Kg/m)149 CI/MS Cover Plate, attached to frame with locking arrangement150 Diesel Road Roller 8 to 10 Ton151 Sheep Foot Roller152 Truck 9 Ton153 Tractor (25-40 HP)154 Tractor Trolley155 Tractor Water Tanker Capacity 4000 Litres Water156 Cement Concrete Mixer 5-7 Cubic Feet157 Pumping Set 15 HP158 Niddle/Plate Vibrator with Operator159 Camel Cart/Bullock Cart with Driver160 Grinding Machine with Operator (Large, Motor Driven)161 Compressor162 Hydraulic Excavater/JCB (Bucket Capacity 0.4cum)163 Dumper164 Scraper165 Shuttering of wooden planks, including poles and other materials along with TP, to be installed at site, removed after stipulated period166 Shuttering of ply, including poles and other materials along with TP, to be installed at site, removed after stipulated period167 Shuttering of iron plate Key, including poles and other materials along with TP, installation at site, removal after stipulated period168 Water and pumping expenses (filling)169 Grinding machine with operator (small, hand operated)170 Iron form for well (diameter 3m, height 75cm) along with TP, installation at site, removal after stipulated period171 Cultivator172 Installation and supply of 500 micron LDPE plastic sheet (BIS No. 10889:2004 BIS No 2508:2016 & BIS No. 16352:2015)
