Civil Work Of Soil Testing Laboratory I.E Tile Work Septic Tank Sanitary Fitting Work Some Work Etc. In District Reasi In Panchayat Gran Brotrian -B Block Reasi, Reasi Under Capex Budged For The Year 2025-26.- 1 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil : 2 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.2 Ordinary Rock 3 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 4 coarse sand : 4 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 6 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 7 Reinforcement for RCC work including straightening , cutting, bending, placing in position and binding all complete 8 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). 9 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. 10 2mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand). 11 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished withfloating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as perstandard design : 12 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete: In colour such as White, Ivory, Grey, Fume Red Brown. 13 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 14 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 15 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 16 Centeringand shuttering including strutting propping etc and removal ofform for suspended floors, roofs, landing, balconies and access platform 17 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS : 8931and weighing not less then 690 gms 18 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 19 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 20 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 21 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. 22 Providing andfixing of Chlorinated ployviny chloride (CPVC) pipe having thermal stability for hot and coldl water supply including CPVCplain and Brass threded fitting. This includes jointing of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 15mm 23 Providing andfixing of Chlorinated ployviny chloride (CPVC) pipe having thermal stability for hot and coldl water supply including CPVCplain and Brass threded fitting. This includes jointing of pipe and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 20mm 24 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid 25 Providing and fixing Anodized aluminum (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285 fixed with dash fastener of required dia and size (dash fastener to be paid separately). 26 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.1 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) 27 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 28 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap 29 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes- 75mm diametre 30 Providing and fixing glazed shutters for doors, windowsand clerestory windows using 10kg/sqm (4mm thick) shutterglass panes including black enamelled lSI marked M.S. 30mm butt hinges with necessary screwspaid seperately thickness 30mm(second class deodar wood) 31 Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked 32 Providing and fixing 30 mm thick wire gauze shuttersusing galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws :In first class Kail wood 33 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . two or more coats on new workover and under coat of suitable shade with ordinary paint of approved brand and manufacture 34 Applying priming coat:13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 35 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.9.10.3 Second class deodar wood 36 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 37 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, includingapplying priming coat of approved steel primer.10.26.1 M.S. tube 38 Construction of CIB (including Concrete/Brick Pedestal of size 3X2, plastering, painting all complete job asper the direction of Engineering In-charge. 39 Carriage of material from source to site of work by MT including loading, unloading and stacking complete. 40 Cement 3.00 KM by MT. 41 Sand 10.00 KM by MT. 42 Stone aggregate 10.00 KM by MT. 43 Brick 85.00 KM by MT. 44 Bajree10.00 KM by MT.
