Tender For Renovation Of Existing Poly House Located At Multipurpose Farm, Keralapuram, Diglipur
Tender Value
7.99 Lakhs
Estimated cost
Bid Submission
25 Jul 2025
0 days left
EMD
15994
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
diglipur → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Existing Poly House Located At Multipurpose Farm, Keralapuram, Diglipur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavationnot exceeding 30 cm in depthbut exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lif upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | All kinds of soil |
| 3 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 4 | 250x16 mm |
| 5 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 100 mm |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 9 | 75 mm diameter |
| 10 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 11 | Coupler75 mm |
| 12 | Single tee with door75x75x75 mm |
| 13 | Bend 87.5°75 mm bend |
| 14 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 15 | On steel work |
| 16 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 18 | 25 mm nominal dia Pipes |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work |
| 20 | 40 mm dia nominal bore |
| 21 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 22 | 40 mm nominal bore |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 24 | 40 mm nominal bore |
| 25 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of Stone Aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 26 | Providing and fixing CPVC union socket of approved quality, Colour and make etc complete. |
| 27 | 25mm dia CPVC union socke |
| 28 | Providing and fixing 200 GSM anti fungal UV treated poly film approved quality and make, and fixing it on the roof as per the requirement. |
| 29 | Providing and fixing of UV treated 40 mesh insect proof nylon net of approved quility and make, and fixing it on all side of the poly house. As per direction of engineer-in-charge. |
| 30 | Supplying and fixing 100 GSMwooven fabric weedmat black in colour. As per direction of engineer-in-charge. |
| 31 | Supply and fixing of UV treated 80 GSM 50 % green shade net all over the structure including all labour charges etc complete etc complete as per direction of engineer-in-charge. |
| 32 | Supply and fixing aluminium channel with zigzag opening including all labour charges etc complete for tightening the UV film, shade net in insect net etc complete as per direction of engineer-in-charge. |
| 33 | Supply and instalation of 26 LPH jain butterfly mist sprinkler etc complete as per direction of engineer-in-charge. |
| 34 | Supplying,installation and commissioning of 1 HP capacity self priming monoblock pumpset high head ( kirlosker or equivalent make) with necessary accessories etc complete as per the direction of engineer-in-charge. |
| 35 | Supply and instalation of 25 cum sand filter etc complete as per direction of engineer-in-charge. |
| 36 | Supply and instalation of 12 cum screen filter etc complete as per direction of engineer-in-charge. |
| 37 | Providing and fixing uPVC Gutter (160mm x 110mm) including all necessary accessories (uPVC socket, uPVC clamp, uPVC elbow, uPVC elbow drop, uPVC stop end etc) as per direction of Engineer-in-charge. |
| 38 | Providing and installation of 16 mm LDPE lateral pipe with all fittings and accessories for fixing mist spinkler. |
| 39 | Steel work in built up G.I pipe tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 40 | Electric resistance or induction butt welded tubes. (G.I pipes). |
| 41 | Providing and fixing CPVC ball valve approved quality. |
| 42 | 25 mm nominal bore |
AI Tender Summary
Tender Timeline
Jul 17, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender