Civil Works Pertaining To Construction Of 4 - Bay Shed At 400 Kv S/S Mandsaur.; 1 4 - bay shed at 400 KV S/s Mandsaur. 2 3004838 4.1.2.3 (SOR w.e.f 01.12.2020) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 3 30048344.1.1.3(SOR w.e.f 01.12.2020)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 - Grade concrete 4 3005781 11.12 (SOR w.e.f 01.12.2020) Providing and fixing glass strips 40 mm wide and 4mmthickin jointsofterrazo/cementconcrete floors. 5 30048434.2.1.3(SOR w.e.f 01.12.2020)Providingandlayingcementconcretein retaining walls,returnwalls,walls(any thickness) including attachedpilasters,columns, pillars,posts,struts,buttresses, stringorlacing courses, parapets, coping, bed blocks, anchor blocks,plainwindowsills,filletsetc.uptofloor twolevel, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate M 15 - Grade concrete 6 3004848 4.3.2(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form work for : above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 7 30049245.16.1(SOR w.e.f 01.12.2020)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlapsshallbeprovidedasper requirementof IS13920forductiledetaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacerbars (chairs)shall bepaid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on ReinforcementCouplersfor Mechanical Splices of Bars for Concrete Reinforcement - Specification) : Mild steel and Medium Tensile steel bars. 8 3004929 5.16.6 Thermo mechanically treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 9 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering,finishing andreinforcement- All work up to plinth level : M-20 Grade Concrete 10 30048935.9.1(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level 11 3004994 6.5.2(SOR w.e.f 01.12.2020)Brickworkwithwellbruntopen bhatta,bricks,crushing strengthnot less than 25kg /cm2 and water absorptionnot morethan20%in foundationandplinthi/ccuringetc complete. Cement Mortar 1:6 (1 cement: 6 sand). 12 30047962.27.1(SOR w.e.f 01.12.2020)Supplying and filling in plinth under floorsincludingwatering ramming consolidatinginlayersnotexceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding20cmin thicknessand dressing complete. (Note:- maximum thickness ofthislayertobeprovided shall be 30cm) 13 30048865.2.1(SOR w.e.f 01.12.2020) Reinforced cement concrete work (with 20 mmnominalsizegraded stoneaggregate) in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering,shuttering,finishing and reinforcement: M-20 Grade Concrete 14 30049005.9.6(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Columns,P i l l a r s , Piers, Abutments, Posts and Struts. 15 30048875.3.1(SOR w.e.f 01.12.2020)Reinforced cementconcrete work (with 20 mmnominalsizegraded stoneaggregate) inbeams,suspendedfloors,roofs having slope ofanydegreelandings, balconies, shelves,chajjas, lintels,bands,plain windowsills, staircasesandspiral staircases above plinth level and upto floor twolevel excludingthecostofcentering, shuttering,finishingand reinforcementin concrete grade. M-20 Grade Concrete 16 30048975.9.3(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. 17 3004899 5.9.5(SOR w.e.f 01.12.2020) Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers 18 30049135.9.19(SOR w.e.f 01.12.2020)Centering and shuttering including strutting, propping etc. and removal of form for:Weather shade, Chajjas, corbels etc., including Edges. 19 30049295.16.6(SOR w.e.f 01.12.2020) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlapsshallbeprovidedasper requirementof IS13920forductiledetaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacerbars (chairs)shallbepaid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on Reinforcement CouplersforMechanical Splices of Bars for Concrete Reinforcement - Specification)Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 20 30050006.7.2.2(SOR w.e.f 01.12.2020)Brick work with fly ash with lime bricks (FALG Bricks) conforming…....... Of brick masonary separately. 21 30050176.15.2.2(SOR w.e.f 01.12.2020) Half brick masonry with fly ash lime Gypsumbricks(FALG bricks) conformingtoIS:12894,insuper structure above plinth and upto floor two level. Having 75 kg/cm2 average compressive strength. Cement mortar 1 : 4 (1 cement : 4 sand) 22 300514111.2 (SOR w.e.f 01.12.2020)52 mm thick cement concrete flooring with concrete hardenertopping,underlayer40mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cementor aspermanufacturersspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 23 3005920 11. 78.1.1 (SOR w.e.f 01.12.2020)Providingandlayingvitrifiedfloortiles Multi/Doublecharged(Minimumtoplayer thickness2.0mm) Neno Polishedselfdesign,in different sizewithwater absorptionless than 0.05%andconforming toIS:15622of approved makeinallcolours&shades,quality/premium qualityinflooringlaidon12mmthickcement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete In light shade glossy/ rustic /stain finished Size 600X600 mm thickness 9-10 mm 24 3005926 11. 79.1.1 (SOR w.e.f 01.12.2020)Providingandlayingvitrifiedfloortiles Multi/Doublecharged(Minimumtoplayer thickness2.0mm) Neno Polishedselfdesign,in different size with water absorption less than 0.05%andconformingtoIS:15622 of approved make in all colours& shades, 1st quality/ premium qualityinskirtinglaidon12mmthickcement mortar 1:4(1cement :4sand) including grouting the jointswithwhitecementandmatching pigments etc. complete In light shade glossy/ rustic /stain finished (a) Size 600X600 mm thickness 9-10 mm 25 300587511.49 (SOR w.e.f 01.12.2020) ProvidingandfixingCeramicglazedwalltiles 300x450mmor more(havingthickness6to7 mm)of1stquality conforming toIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bedofCementMortar1:3(1Cement:3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. 26 3005874 11.48 (SOR w.e.f 01.12.2020)ProvidingandlayingCeramicglazedfloortiles 300x300mmor more(havingthickness6 to 7mm) of 1st quality conforming toIS : 15622 of approvedmakeinany coloursandshadelaidon 20 mmthickCementMortar1:4(1Cement:4 sand)including pointingthejointswith white cement and matching pigment etc., complete. 27 300615613.8(SOR w.e.f 01.12.2020) 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 28 3006147 13.2.2(SOR w.e.f 01.12.2020) 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 sand) 29 300614913.3.2(SOR w.e.f 01.12.2020)20 mm cement plaster of mix : 1:6 (1 cement : 6 sand) 30 3006152 13.5.1(SOR w.e.f 01.12.2020) 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 sand) 31 3000216 88NSORProviding & fixing 35 to 40 mm thick Polished Cuddappa stone slab for tiers of cup board, ward robe and shelf below kitchen platform fixed with 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointing with cement slurry mixed with suitable plgment to match the approved shade of stone complete including cutting, rubbing, polishing, T&P, taxes, labour, transportation etc, complete as per direction of engineer -in-charge. 32 3005439 9.113.1 (SOR w.e.f 01.12.2020) Providingandfixingaluminium handles ISImarkedanodised (anodiccoatingnot lessthangradeAC10asperIS :1868) transparentordyedtorequiredcolouror shade with necessary screws etc. complete: 125 mm 33 30054359.110.5 (SOR w.e.f 01.12.2020), Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparentordyedtorequiredcolouror shade with necessary screws etc. complete: 150x10 mm 150x10 mm 34 3005436 9. 110.6 (SOR w.e.f 01.12.2020), Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparentordyedtorequiredcolouror shade with necessary screws etc. complete: 100x10 mm 100x10 mm 35 3005429 9.109.1(SOR w.e.f 01.12.2020), Providing and fixing aluminium sliding doorboltsISImarked anodised(anodic coatingnotlessthangradeAC10as per IS:1868)transparentordyedtorequired colourorshadewith nutsandscrewsetc. complete: 300x16 mm 36 300747921.3.1(SOR w.e.f 01.12.2020)Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 37 30051459.1.2(SOR w.e.f 01.12.2020)Providing wood work in frames of doors, windows,clerestorywindows and other frames, wrought framed and fixed in position withholdfastlugsorwithdash fastenersofrequireddia andlength(hold fast lugs or dash fastener shall be paid for separately). Sal wood 38 3005212 19.18.2(SOR w.e.f 01.12.2020)Providing and fixing ISI marked flush door shuttersconformingto IS:2202(PartI) decorative type, core of block board constructionwithframeof1stclasshard wood and well matched teak 3 ply veneering with vertical grains or cross bandsandfaceveneersonbothfacesof shutter. 30mmthickincludingISImarked Stainless Steel butt hinges with necessary screws. 39 300624413.67.1(SOR w.e.f 01.12.2020)Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 40 30052779.48 (SOR w.e.f 01.12.2020) Providing 40x5 mm flat (iron hold fast 40 cmlong)(0.628kg) includingfixingto.frame with 10 mm diameter bolts, nuts and woodenplugsandembeddingsincement concreteblock30x10x15cm1:3:6mix(1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 41 3006206 13.41(SOR w.e.f 01.12.2020)Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 42 3006220 13.53(SOR w.e.f 01.12.2020)Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 43 3006211 13.46(SOR w.e.f 01.12.2020)Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 44 3005670 10.6.1 (SOR w.e.f 01.12.2020)Supplyingandfixingrollingshuttersof approved make, made of required size M.S.lathsinterlockedtogetherthrough their entire length and jointed together at theendby endlocks mountedon speciallydesignedpipeshaftwith brackets,sideguidesandarrangements forinsideandoutsidelocking withpush and pull operation complete including the costof providingandfixingnecessary 27.5cmlongwiresprings manufactured fromhightensilesteel wireofadequate strength conformingtoI.S.4454-part-1 and M.S. top coverofrequired thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover. 45 3005270 9.43.1 (SOR w.e.f 01.12.2020)Providing and fixing M.S. grills ofrequired pattern in frames of windows etc. withM.S.flats,squareorroundbars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. 46 3006241 13.65(SOR w.e.f 01.12.2020)Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 47 3006034 12.32.2(SOR w.e.f 01.12.2020)110 mm diameter (minimum wall thickness 2.2 mm) 48 300589911.66 (SOR w.e.f 01.12.2020) Providingandlayingfactorymademachine pressedprecast cementconcreteinterlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness,M-30 gradewithgreycementand pigment all as specified. Madeby block making machine with strong vibratory compaction, laid inrequired colour and patternover andincluding50mmthick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 49 3007210 18.28(SOR w.e.f 01.12.2020) Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank+K7078(Unit:-L= Litre) 50 3006923 18.6.2.1(SOR w.e.f 01.12.2020) , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in-Charge..Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes. 15 mm dia 51 3006925 18.6.2.3(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in-Charge..Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes. 25 mm dia 52 3006926 18.6.2.4(SOR w.e.f 01.12.2020)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in-Charge..Concealed work including cutting chases and making good the walls etc...15 mm nominal outer dia .Pipes.32 mm dia 53 3006931 18.7.5 (SORw.e.f 1.12.202) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..40 mm nominal outer dia .Pipes. 40mm dia 54 3006929 18.7.3 (SORw.e.f 1.12.202) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,..having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work..40 mm nominal outer dia .Pipes...25 mm dia 55 18.12.1.2(SORw.e.f 1.12.202) Providing and fixing gun metal gate valve with C.I wheel of approved quality ( scrwed end)..32 mm dia 56 18.12.1.1 (SORw.e.f 1.12.202) Providing and fixing gun metal gate valve with C.I wheel of approved quality ( scrwed end)..25 mm dia 57 300721118.29 (SORw.e.f 1.12.202)Providing and fixing brass bib cock of approved quality..15 mm nominal bore 58 300737319.31 (SORw.e.f 1.12.202) Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 59 300660917.7.1 (SORw.e.f 1.12.202) Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required..Single half stall urinal with 5 litre.P.V.C. automatic flushing cistern. 60 3006598 17.2.1(SOR w.e.f 01.12.2020)Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :..W.C. pan with ISI marked white solid plastic seat and lid 61 3007319 19.9.1.1(SOR w.e.f 01.12.2020) Constructing brick masonry manholeincementmortar1:4 ( 1 cement : 4 sand ) R.C.C. top slabwithCement Concrete 1:2:4 mix(1 cement : 2 sand: 4 graded stone aggregate 20 mmnominalsize),foundation concrete 1:2:4 mix(1 cement : 2 sand:4gradedstone aggregate20mmnominalsize) inside plastering 12mm thick withcementmortar1:3 (1 cement:3sand)finishedwith floating coat of neat cement and makingchannelsin cement concrete1:2:4(1cement: 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cementcompleteas per standard design :. Inside size 90x80 cm and 45 cm deep includingC.I. coverwith frame (light duty) 455x610 mm internal dimensions total weight ofcoverandframetobenot less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks 62 300662017.11.2(SOR w.e.f 01.12.2020) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :..White Vitreous China Wash basin size 630x450 mm with a single 15 mm.C.P. brass pillar tap. 63 300737419.32.1(SOR w.e.f 01.12.2020) Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete :..100 mm dia 64 300737519.32.2(SOR w.e.f 01.12.2020)Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete :..150 mm dia 65 3006851 17.87(SOR w.e.f 01.12.2020) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 66 300682217.67(SOR w.e.f 01.12.2020) Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 67 3006847 17.83.2(SOR w.e.f 01.12.2020) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour...600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 68 300575121.1.1.2(SOR w.e.f 1.12.20) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :.. For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) 69 3007474 21.1.2.2(SOR w.e.f 01.12.2020)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) 70 3000132 NSORProviding & fixing Armstrong or equivalent make False Ceiling with Glass reinforced Gypsum, 12mm thick semi perforated designer tile of size 600x600mm False Ceiling sytem A-class, fire resistant, RH 95, NRC 0.3 to 0.4 with 15mm select GI powder coated T grid system with black reveal suspended from existing roof by 4 mm GI wire hanger etc. complete duly approved at 1200mm maximum centre to centre. Flush fitting 1200mm cross Tees to be interlocked between main runner at 600mm centers to form 1200 x 600mm modules, cut cross Tees longer than 600 mm at 1200mm cross Tees to form 600 x 600mm grid to support ceiling tiles complete, care should be taken to leave the recesses as per required arrangement of illuminaries, including transportation etc. complete and as directed & approved by Engineer-in-charge. 71 3005695 10.41.1Steel work in built up M.S tubular section ( round, square or rectangular hollow tubes etc.) trusses/ frame work etc. 72 300600212.15(SOR w.e.f 01.12.2020) Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 73 300600312.16.1(SOR w.e.f 01.12.2020)Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : Ridges plain (500 - 600mm). 74 300958037.4 SOR PWD wef 01.12.2020 ElectricalEarthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required 75 3009581 37.5 SOR PWD wef 01.12.2020 Electrical Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum 76 3009135 27.9.1.2 (SOR w.e.f 1.12.2020) Single pole MCB SP 6Amp to 32Amp 10kA rating 77 3009137 27.9.1.4(SOR w.e.f 1.12.2020) Triple pole & neutral 6amp to 16amp rating 78 3009143 27.9.3.2(SOR w.e.f 1.12.2020)MCB TP 6amp to 32 amp 10kA rating 79 3009144 27.9.3.4(SOR w.e.f 1.12.2020)MCB TP 50amp to 63 amp 10kA rating 80 300019367bNSOR Supply & fixing accepted standard steel sheet enclosures of Havells, Anchor, Crompton or equivelant make ( dust protected) for TPN Distribution Boards including Bus Bar, Neutral Link, din bar suitable for incorporating MCB surface / Flush mounting type including cost of all material, labour, taxes, transportation etc. complete..Upto 6 MCB per pole 81 3008124 4.1.1.1(SOR w.e.f1.12.2020)Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary short point. (Using flush type normal accessories) Primary short point 82 30081254.1.1.2 (SOR w.e.f1.12.2020)Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary short point. (Using flush type normal accessories)Primary medium point 83 3008126 4.1.1.3 (SOR w.e.f1.12.2020)Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Light point/fan points. Primary short point. (Using flush type normal accessories)Primary long point 84 3008133 4.1.4.1 (SOR w.e.f 1.12.2020) (SOR w.e.f 1.12.2020)Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- Call bell/buzzer points Short point. (Using flush type normal accessories) (a) Short point 85 3008254 9.1.1.3(SOR w.e.f 1.12.2020)Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :- On separate board Long point ( Using flush type normal accessories) Long point 86 30081604.3.1( SOR PWD w.e.f . 01.12.20) Electric Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification 2x2.5 Sq.mm. (Using modular accessories)..2x2.5 Sqmm (Using flush type normal accessories) 87 3009408 30.6.2 SOR PWD wef 01.12.20 ElectricSupplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required.380mm sweep RPM 900 /1400 88 300928829.3.3 SOR PWD wef 01.12.20 Electric Supply and fixing as per specification call bell/buzzer of approved make with necessary materials complete. Ding dong bell 89 300939230.1.2 SOR PWD wef 01.12.20 ElectricSupplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m*3/min and service value >= 4.00 as per BEE.. 90 3009431 31.3.3 SOR PWD wef 01.12.20 ElectricalSupply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. 91 3009305 29.7.5 SOR PWD wef 01.12.20 Supply and fixing in position LED lamp of approved make..9 watt 250Volt 92 300930329.7.3 SOR PWD wef 01.12.20 Supply and fixing in position LED lamp of approved make.. 5 watt 250Volt 93 30047962.7.1, SOR PWD wef 01.12.20Supplying and filling in plinth under floorsincludingwatering ramming consolidatinginlayersnotexceeding 20cm in depth and dressing complete. With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding20cmin thicknessand dressing complete. (Note:- maximum thickness ofthislayertobeprovided shall be 30cm) 94 30047922.24, SOR PWD wef 01.12.20Filling available excavated earth (excludinghardrock/Ordinary rock)in trenches, plinth, sides of foundations etc. in layersnotexceeding20cmin depth,consolidatingeach deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
