Tender For Work Of Various Maintenance Works In Completed Jjm Schemes Under Rural Division Ii Ncr Alwar - Repairing Of Leakage In Existing Distribution/Risingmain/Transmission Mainac/Pvc/Hdpe Pipeline Upto1.5Mtr Depth Of Size Sas Given Below By Digging Ou, ramgarh-Rajasthan

Tender For Work Of Various Maintenance Works In Completed Jjm Schemes Under Rural Division Ii Ncr Alwar - Repairing of leakage in existing Distribution/RisingMain/Transmission MainAC/PVC/HDPE pipeline upto1.5mtr depth of size sas given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P& labour and will arrange transportation of material required from Jenstore.(Required material such as pipe piece, CID Joints shall be provided by Department free of cost). In all type Soil AC/PVC/HDPE pipe 2 50/63/75mm 3 80/90mm 4 100/110mm 5 125/140mm 6 150/160mm /180mm 7 200/225mm 8 Unlowering of submersible pump set along with lowering pipes with depth up to 120 mtr and submersible cable with safety from tube well, checking the pump set, transportation of pump set from tube well site to storeas direction,receiving repaired / new pump set from store/ divisional store , testing the same, transportation tosite and lowering back into tube well along with submersible cable, lowering pipes,specials etc and commissioning of the tube well. The job also includes cable jointing,checking of discharge of pump set,interconnection of lowering pipe from nearby distribution pipe line,checking of starter and reporting for completion of Job or fault/problem if any.(Upto 20 Km distance run by lowering machine). For three phase pump set.G.I. Double Flanged Pipe Lowering Assembly of nominal dia 9 50 mm dia 10 Repair Rewinding of Submersible motorand pump includes full servicing and rewinding (wherever required) as per manufacturers specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job 11 Above 10 HP to 12.5 HPV-8 12 Above 12.5 HP to 15 HPV-8 13 Purchase of CID Joint for leakage repair of Dia 14 65/75 mm 15 80/90 mm 16 100/110 mm 17 125/140 mm 18 150/160 mm 19 200/225 mm 20 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesstraight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steelInsersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 21 Manually Operated CI Sluice valve of Class PN-1.0 22 80 mm HW 23 100 mm HW 24 150 mm HW 25 Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. 26 3 core 4.0 Sq.mm 27 Labour Charges for removing electric fault in wiring/ making connection through lugs of motor pump set with starter at head works of water supply scheme/tubewells/openwell including cost of installation tape etc.

INR 1000 /-

INR 9960.0 /-

INR 4.98 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB