Tender For Furnishing Of Branch => Limited I Interior Furnishing Works (Branch) II False Ceiling Works (Branch) III Interior Furnishing works (ATM) 1 PARTITION WORKS: Partition works shall be done with following specification: Al square frame of section 1.5x1.5 fixed in position with 2.5 to 3 long steel neetle fold screw. The vertical and horizontal members being placed at 2 c/c as per site condition as directed. Panel for solid partition fixing 8 mm water proof plyw- ood, conforming to IS:303 commercial ply of Greenply Archid, Century make on both sides of frame work with fevicol SH and headless nails of 17 nos of 1.25 length and securing the cover with 1.5 long steel nettled fold screw. Making the plywood surface level before fixing the laminate/veneer. 1 mm th laminate/ mica fixing on inside of panel with 1.5 mm th. Groove in the panel as per the design with provision of the openings in the panel for switch boards, box and cuts in frame for carrying conduits if necessary, and fixing 1.0 mm laminate on the outside face of shade and colour a per UBI colour scheme given in the tender specification with 8mm glass to be given in the design. The open edge are to be blocked by teak wood bead of required size and design. a Entrance with Door glazed Partition: Providing and fixing Entrance Door partition in above specification with entrance door of size (5x7) double leaf glazed with 12 mm toughened glass with all fittings mounted on floor machine & pivot complete. 60 sft i BM room partition with 8mm glass. 210 sft (BM Cabin) b Low Height Partition: Providing and fixing low height partition in above specs with laminate on both sides and top of each partition fixed with 10mm glass of 1x2 firmly secured on SS D brackets. 80 sft (Officer cubicle, S/w counters, Wicket gate) c Cash Cabin Partition (7Ht.): Providing and fixing partition in above specification with glass on side partition, front of cabin fixed with 12 mm glass having U opening in the glass to handle cash & papers. 110 sft (Cash cabin, S/w front) d Partition with both side laminate including doors (7/full Ht): Providing and fixing partition in above specification with 1mm laminate on both sides as per design in color and shade of Union Bank of India. 90 sft (Strong room partition, UPS/Store Doors) e Partition with laminates pasted on cement board. Providing and fixing partition in above specification with 10 mm glass. 35 sft 2 DOOR FIXTURES: Providing and fixing of door fixtures. a) Door handle mortise type Godrej, Door set make 2 nos b) Door Stopper (Hyper, Amber, Shakti) 2 nos c) Floor Machine (Hyper, Amber, Shakti) 2 nos d) Door closure (Hyper, Amber, Shakti) 2 nos e) SS handle 12 long (Door set, Amber, Shakti) 2 nos 3 WALL PANELLING: Providing and fixing wall panel in column/entrance area of banking hall up to a height of 9 with 10/12 mm thick ply of Century, Greenply, Archid make conforming to IS:303 commercial ply fixed on wooden frame work laid grid of 2x2 pasted with 1mm thick laminate of color/ shade as per UBI scheme as given in tender specification. 110 sft (Columns, Entrance) 4 BM TABLE: Fabricating and fixing in position in Branch Managers room, table of size 60x 3 x 26 with drawers etc. shelves etc. complete with locks, clip catchers as per the plan made up with 18, 12, 10mm th ply conforming to best quality IS:303 commercial ply with 1 mm thick laminate as given in tender specification fixed on the top and exposed face. Inside face shall be pasted with 0.7 mm off white liner mica. 1 nos 5 OFFICERS TABLE: Fabricating and fixing in position in Officers room, table of size 43x 26 x 26 with drawers etc. shelves etc. complete with locks, clip catchers as per the plan made up with 18, 12, 10mm th ply conforming to best quality IS:303 commercial ply with 1 mm thick laminate as given in tender specification fixed on the top and exposed face. Inside face shall be pasted with 0.7 mm off white liner mica. 1 nos 6 CABINET: Providing and fixing File cabinet of size as per drawing made of 18, 12 mm plyboard with all the necessary fixtures like handles, lock, clip catcher etc. all the exposed surface are to be pasted with mica 1.0 mm of color as given in the specification scheme. All back side shall be pasted with 0.7 mm off white mica. The back side of cabinets wherever visible shall have mica as that of Union Bank of India color scheme. a Storage cabinet size (16 deep x high) 50 sft b Side table credenza of size 16x3 (BM table, S/w, Cash Cabin) 40 sft 6 COUNTERS: Providing, fabricating and supplying and fixing in posit- ion service counter as per the plan made with 18 mm, 12 mm, and 6 mm ply of approved make and quality with a counter top of 3 width at a height of 26 from the floor, with a length of 5 or as directed/as per the site conditions, and each unit shall be provided with drawers, key board, shuttered shelves etc. complete. All exposed surfaces to be fixed with 1.0mm thick laminate and inside faces like drawers, table, side table inside and back face shall be pasted with 0.7mm off white liner mica. The back side of the cabinet, side tables wherever visible shall have mica same as that of the color scheme with all necessary handles, locks, night latch, hinges, keyboard tray etc complete. The rate includes 12 mm glass in the counter front. The counter to be provided with box to house CPU, and wire managers as required. a Single Window Counters: 10.0 rft b Cash Cabin Counter: 5.5 rft 7 DROP BOX: Providing & fixing in position Drop Box made out of 12mm th. Ply & 1 mm th. Laminate on external surface with openable door with clear glass with hinges locking arrangements painting internally with enamel paint complete as per design & direction. (Size 13 x 2 x 9) 1 nos 8 CUSTOMER WRITING LEDGE: Providing & fixing writing desk made in 18 mm thk commercial ply for all structure work 1 mm. thick laminate finish with Hardware etc. complete. (Size-3 X 2 X 26) 1 nos 9 SUGGESTION BOX: Providing & fixing in position Drop Box made out of 12 mm th. ply & 1 mm th. laminate on external surface with openable door with clear glass with hinges locking arrangements painting internally with enamel paint complete as per design & direction. (Size 13 x 2 x 9) 1 nos 10 NOTICE BOARD: Fabricating & fixing notice board of minimum size 50x30 using 12mm soft board covered with approved colour unitex carpet cloth & with 25mm x 25mm wooden frame work on all sides with 2 coats of polish including cost of all materials etc 1 nos 11 GLASS FILM: Providing and pasting frosted type Garware, 3M make film on the glass partition as directed. 140 sft 12 BANK LOGO: Providing and pasting frosted type Garware, 3M make film / Bank logo on the glass partition as directed. (Entrance Door, S/w counter, Cash cabin glass) 6 sft 13 Providing & fixing at top of cash counter anodized aluminium framed grill (minimum anodic coating of Grade AC 15) of approved shape, pattern and design including cutting, bending, hoisting and erecting with fixing clips or hold fasteners or bolts and nuts as required etc as per the design & drawing etc 50 sft 14 Providing & fixing site information panel as per UBI design enclosed, the cost shall include all materials, fixing at site etc complete. 1 nos 15 VENETION BLINDS: Providing and supplying vertical blinds for windows in Banking hall in colour and design as directed. Make: Mac, Vista Levlor, Marvel 20 sft 16 Providing and placing of 12mm th polished edges glass 18 sft top of given size as required of Saint Gobain make. 17 Providing and fixing in position shutter box in ACP 3 mm thick composite Aluminium laid on Al. section frame work of approximate 2 x 1.5 section at 2 0 c/c both ways, ACP sheets in silver colour as per Indian Bank colors in in line level and joints filled with silicon sealant complete as directed. 110 sft TOTAL II FALSE CEILING WORKS (BRANCH) S.No. Item/Description Qty Unit 1 ARMSTRONG CEILING 2x2: Providing and fixing false ceiling at all heights of 600x 600x12mm Armstrong mineral fibre ceiling tiles of type BIZA RH-90 laid on armstrong prelude XL exposed grid systems with 9mm wide T - Section flanges colour white. The frame work comprises of main runner spac- ed at 1200 mm C/C. Hangers (GI wire) to be fixed by the approved roof plugs, screws etc. The last hanger at the end of each main runner should not be greater than 450 mm from the adjacent wall. Flush fitting 1200 long cross tees (with double stitching) to be interloc- ked between main runner at 600mm enter from 1200 x 600 mm modules. Cut cross T section longer than 600 mm to be supported independently 600x600 mm module to be formed by fittings 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Peri- meter trim to be armstrong wall angle secured to walls at 450 mm maximum centres. 530 sft 2 GYPSUM BOARD CEILING: Providing and fixing false ceiling as per approved plan with Gypsum board (India Gypsum, Lafarge) 12 mm th on frame consisting of main and cross runners of GI section of 2.5 size @ 2.85 kg/12 feet and 1.75 @ 2.9 Kg/12 feet connected with screws to form a grid of not more than 2x2. Opening for lights and fans to be provi- ded. The ceiling height shall not be less than 96 from the floor. The rate includes all exra frame work required to hold the concealed light fixtures, jointing with comp- ound and fibre tape 3mm gypsum punning/ plastering and 3 coats of Asian/Nerolac Acrylic emulsion paint. 340 sft TOTAL III FURNISHING WORKS - ATM Sr. No. Element Specifications Qty Unit 1 False Ceiling Armstrong Ceiling: Providing and fixing false ceiling at all heights of 600x600x12mm Armstrong mineral fibre ceiling tiles of type BIZA RH-90 laid on armstrong prelude XL exposed grid systems with 9mm wide T - Section flanges colour white. 45.00 sft 2 Wall Panelling with ACP Sheets Providing and fixing in position wall panelling in ACP 3 mm th composite Aluminium laid on Al. section frame work of approximate 2x1.5 section at 20 c/c both ways, ACP sheets in silver colour as per UBI colors in line level and joints filled with silicon sealant complete as directed. 145.00 sft 3 Partition works Providing and fixing in position partition made of ACP 3 mm thick in matching colour as per UBI scheme complete as directed. 55.00 sft 4 Shutter box Providing and fixing in position shutter box in ACP 3 mm thick composite Aluminium laid on Al. section frame work of approximate 2 x 1.5 section at 2 0 c/c both ways, ACP sheets in silver colour as per Indian Bank colors in line level and joints filled with silicon sealant complete as directed. 30.00 sft 5 Front Toughened Glazed partition with Door Providing & fixing fully glazed partition with powder coated Aluminium section (Jindal make) on all four sides till 7-0 height & above 7-0 it will be fully fixed partition till top height with floors spring, brush finished steel handles hinges, door handle lock etc.Size:- 3-0 x 7-0 45.00 sft 6 Floor Machine Providing and fixing of hydraulic floor machine in the entrance doors. Make: Hyper, Amber, Shakti 1.00 nos 7 Mortise lock with handle Providing an dfixing of mortise lock with handle in the UPS room door. Make: Doorset, Godrej. 1.00 nos 8 Steel handle Providing and fixing SS handle at the entrance door. 1.00 nos 9 Film Pasting of film on the front glass door 24.00 sft 10 Bank logo Pasting of Bank logo on the front glazed partiton and the door. 1.00 nos 11 Aircon Louvers 6 wide Powder Coated Aluminium Aircon Louvers 1.00 sft
