}

Tender For Construction Of Compound Wall To Mayanamburial Ground Panaiyur In Ward No 4 In Edaikazhinadu Town Panchayat., Chengalpattu-Tamil Nadu

Town Panchayats has published Tender For Construction Of Compound Wall To Mayanamburial Ground Panaiyur In Ward No 4 In Edaikazhinadu Town Panchayat.. Submission Date for this Tender is 21-07-2025. Wall Construction Tenders in Chengalpattu Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

50194438
Tender For Construction Of Compound Wall To Mayanamburial Ground Panaiyur In Ward No 4 In Edaikazhinadu Town Panchayat.
Tender
Indian
Tamil Nadu
Chengalpattu
21-07-2025

Tender Documents

Tender Details

Tender For Construction Of Compound Wall To Mayanamburial Ground Panaiyur In Ward No 4 In Edaikazhinadu Town Panchayat.; 1 Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. (I.No.61) 2 Collection supply and filling of Stone Dust of approved quarry including cost andConveyance of all materials to site and all labor charges for filling etc., Complete. 3 Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. 4 Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. a)for Column upto ground level 5 b) for plint beam 6 Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. 7 Reinforced Cement Concrete 1:1.5:3 (One cement one and half fine aggregate and three course aggregate) mix using 20mm HBG ISS metal for all RCC items of works excluding centering and shuttering and cost of reinforcement grill but including curing the sameand also fixing fan clamps and fixtures in RCC works whereever necessary as directed by the departmental officer etc., completea) upto Grade Beam 8 Above Grade Beam 9 Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best countryBricks of size 8 ¾”x 4 ¼”x 2 ¾”from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications. 10 Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 11 Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm 12 Supplying and fixing of M.S grills & Grill gate of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer members which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications 13 Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Key Value

Document Fees
Refer document
EMD
INR 15000.0 /-
Tender Value
INR 15 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail