Plumbing Related Works In Different Lakes Located In Gota Ward Of Nwz.(Arc)-1.) Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04B001A) 2.) Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04B002A) 3.) Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In all sorts of soil and soft murrum. a 0 to 1.5 meter depth. b 1.5 to 3 meter depth. c 3 to 4.50 meter depth. d 4.50 to 6.00 meter depth. 4.) Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. (4006) 5.) Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete (04008A) 6.) MS work : Providing, fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bright Bars, Angles, MS Sheet, Girder, Beam, cattle trap. eep threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest relevant IS codes for the work of steel structures like staircases, ilings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap, windows, pipe rack, rungs, false ceiling frame work, Roof canopy, fencing posts, M.S. Screen & fencing jali frame work etc. including straightening, cutting, bending, bolting and welding the members all as per structural drawings and as per detailed 7.) Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. 8.) Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). 9.) Labour charges for dry stone pitching of 22.5 cm. thick including preparing the surface etc complete. Providing and supplying,and jointing ISI mark only standard length stoneware pipes of following class and diameter including excavation for laying of pipes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. compl. (IS651/1989 or its latest revision) including labour work for lowering, laying, joiting with cement mortar (1:1) proportion, proper postion, grade and alignment and all level as directed by engineer in charge including store to site of work jointing material etc complete. Class AA 100 mm dia 150 mm dia 230 mm dia Providing and laying rubble soling of required thickness, under trenches, pits,foundations etc. including hand packing, laying in proper grade, spreading, filling the interstices with sand/quarry dust/grit including watering, consolidation by rolling/ compacting mechanically with 3-5 ton compactor etc complete as per drawings,specifications and as directed by EIC. Conveyance charges lime murrum building rubbish earth manure or sludge & execavated rock and rubbish up to 5km Providing and operation dewatering Pump including fuel charges & operator Charges etc. as directed etc. comp. (Shift for Eight Hour) (For Each Pump Set, No payment should be allowed for non working condition of machinery) Hiring and operating Mud Pumps incl. Cost of fuel and operator including the cost of to and fro transportation, laying of the delivery hoses as required, lowering and lifting the pumps as and when required etc. complete. Set Do As Directed. (No payment should be allowed for non working condition of machinery) Providing & Supplying JCB Machine on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg. in charge, rate includes all nece. shifting, fuel and operating charges and stacking of useful & non-useful materials separately up to store. (No payment should be allowed for non working condition of machinery and for pipe line excavation and laying work) Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing Work on site by using Operator, fuel, power Supply etc. Complete as Directed. (No payment should be allowed for non working condition of machinery and for pipe line excavation and M.H. work. Allowed only for break down work) Supplying, labour for break down repairing work for activities like excavation, disliting, removing debris from trench back filling etc. comp. as directed by Eng.in charge. Mazdoor at day /Night Fitter at day / Night Makadam/ supervision at day / Night Barricading the entire break down or excavated area on rental basis using wooden ballies / M.S.angles at max. 2.00 meter centre to centre, C.G.I. Sheet, reflective paint / Board out side to avoid accident & for smooth traffic diversion & movement including cautionary board etc. Item also includes for making temporary sufficient nos of lighting arrangement through out the work with necessary required arrangement. The same shall be removed after completion of work. (Only for break down work from start to complete) Providing, laying and jointing in true line and level UPVC pipe (SCH-40) of following dia. Including fittings of standard make as approved by Engineer-in-charge. 15 mm 25 mm 40 mm 50 mm Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials .etc complete Wall painting (two coats) with plastic emulsion paint of approved brand & manufacture on undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortrd ropping and other foreign matter and sand papered smooth. Making hole on existing CI/DI/MS water pipe line including nacessary GI fittings item also includes necessary excavation, dewatering and refilling as per instruction Engineer In charge etc.comp. (a) 15 mm Dia Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G) 110mm Providing and fixing screw down bib taps of following size.(A) Brasss crew down bib tap polished bright. (i) 15mm dia. Providing and fixing ball cock of approved.quality as directed.(A) Copper Metal (i) 25mm dia. Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern as per Consultants design also includes required fabrication structure in the grid of 2-0x2-0 size using hollow pipe of 16 gauge & size 2x1 & 1x1,G.I. & Bitumen Washers,Silicon paste application for fixing the sheet.Rate also include necessary bending,cutting,labour charges,Zinc Primer coat & Two coats of oil painting of color as approved by consultants & making good the wall.(N.S.) Hiring of Tractor with trolley considering 8 Hrs. As working Day hours inclu. Driver Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia. Providing and fixing ball cock of approved. quality as directed.(B) Abonite (i) 25mm dia. Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia. Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592- 1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592- 1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(iii) 300 mm (04010C) Extra for under reaming inside the bore Holes for under reamed piles of following Diameter.(iii) 300 mm (04011C)
