Proposed Furniture Work For Sub Divisonal Office At Gargoti, Tal- Bhudargad, Dist- Kolhapur.-1 2 1 Providing & fixing wall paneling in 19 Millimetre and Millimetre thick Plywood finished with 1.00 Millimetre laminate for all exterior sides, with approved shade as per detailed drawing & design.brama TW lipping etc. complete. Plywood MR Grade 100% BWR IS 303 standards empowered with antitermite anti fungus chemical. (before execution sample) 2 Providing and Supplying Sofa Set using cotton jute covers seat back and handles made of 50 x 50 mm teak wood frame and elastic on top with 100 mm depth 40 density U Foam top including all necessary hardware etc complete. 3 PRIVIDING AND FIXING MODULAR ACOUCTICAL WOODEN WALL PANELLING: nominal width 100 / 150mm, having80mm wide panel with 20mm reveal having thickness of 15mm thickness and length 2400 mm. The panel shall be made of Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.7mm PVC edge banding along the length side with a similar finish as that of face. The back of the panel shall have a black acoustic felt to cover the reveal of 20mm attain an NRC of 0.4 for 150mm. / 0.5 for 100mm. module (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423. The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. The back of the panels shall profile-grooved to receive 3600mm special main beam carrier with integrated factory fitted clips for installation. SUSPENSION: The panels shall be upward mounted on 24 mm wide T - section flanges having rotary stitching along the length of the beam with a web height of 43mm. The Main Beam shall have integrated (factory fitted) locking clips installed 100 / 150mm centre to centre distance. The deflection loading of the main beam tested as per ASTM C635 (Deflection limit less than L/360) shall be at least 21.4kg/m. The end details of the main beam shall be made of pre hardened steel and fixed to the ends with point fixing. All main beam to main beam connection shall have a pull out strength more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with bending capability. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of Manufacturer make.The panel & grid system used together shall carry a 1 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The panel & grid shall have the manufacturers name embossed/printed on itself. The supply shall be backed by Manufacturer Test Certificate. CEILING INSTALLATION:Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centre to centre. Mount the wall angle around perimeter at desired height. Install the main beam with factory fitted locking clip at a level 16mm above the wall angle level. Main beam to be supported from the structure with 1st suspension not more than 300mm from the wall and distance between suspensions to be less than 900mm centre to centre. Each main beam are to place at 600mm centre to centre with the 1st main beam at not more than 100mm from the wall. Install the panels one-by-one by inserting the profile-groove at the back of panel in the clips fitted on the main beam. Use a wood splice accessory provided Manufacturer to join planks. Continue installing rows of planks till the actual length/width is achieved. Place the border panels on the wall angles for a finished visual. Finish edges using the edge banding tape to cover the cut edge of the panel provided Manufacturer.SUSPENSION SYSTEM accessories manufactured and supplied Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners.WALL INSTALLATION: An appropriate vapour barrier (by others) shall applied/installed on the vertical surface before theinstallation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer‘ 4 Providing and fixing side storage unit made of 18 are mm thick boiling water Resistant plywod IS 303 at tre top bottom sides. shelves. front of Drawer and shuters 12 mm thick boiling water Resistant plywood IS 303 for back and drawer sides and bottom Necessary teak wood lipping and molding is to be provided at edges of plywood finished with melamine plish with french polish. exposed faces to be finished with 1 milimetre thick laminate and intenrnal surafaces with 0.80 milimetre thick laminate elduing all necessary hardwares such as bars L hinges, stainless steel finasled 100 mm handles, locks, stainless steel finished tower bolt and magnet. cubic manageer teleschopic channel etc complete as per detail drawing and design width 0.45 m Before execution sample should by got approved from engineer in charges) 5 Providing and fixing bed side table of size 400 milimetre long X 400 milimetre depth X 415 milimetre height. The bed side unit is made up of 18 milimetre thick prelam particle board with both side decorative laminate. All exposed edges are sealed with 2 milimetre thick polyvinyl chloride edge banding. The bed side table has one drawer and one shelf. The shelf is made of 18 milimetre thick prelam particle board with both side decorative laminate. All exposed edges are sealed with 2 milimetre thick polyvinyl chloride edge banding. 6 Providing and fixing of tea table 900 milimetre X 750 milimetre X 450 milimetre with 12 milimetre thick colour eitched tempered glass with bevelled drawing made out of 18 milimetre thick waterproof ply. The outer laces to be finished with high quality 4 milimetre thick veneer or 1 milimetre thick mica, excetra 7 Providing & fixing Conference Table using of 18 millimeter thick commercial ISI 303 plywood with 12 & 8 milimeter thick ISI 303 commercial plywood back all exposed surface shall be covered with & millimeter Korean & inside 1.00 millimeter thick white laminate, all lipping shall be melamine polish as match as laminate color etc complete as per drawing & Instruction of Engineer in charge 8 Providing & fixing 75 Millimetre thick Partition using 50 Millimetre thick Plywood for Frame having 19 Millimetre thick Plywood and 9 mm thick plywood for both sides. Partition Should Finished with 1.00 Millimetre thick laminate, 12 Millimetre thick Clear glass with necessary fixtures to provided as directed etc. complete..folding bracket, brama TW lipping etc. complete. As per detailed drawing and design. Plywood - MR Grade 100% BWR IS 303 standards empowered with antitermite anti fungus chemical..(before execution sample should be got approved from engineer 9 Providing and Fixing Designer Wall Paper etc complete 10 Providing and fixing double faced mobile unit for compactor 2150 milimetre height X 1830 milimetre width X 900 milimetre depth. Base Frame shall fabricated in channel type from minimum 2.5 milimetre thick mild steel sheet size of channel 25 milimetre X 100 milimetre X 45 milimetre. The guide rails shall be made out of 28 milimetre bright bar placed on 1.2 milimetre thick mild steel sheet which will be above the floor and are as per the international standard of safety. Super structure of the mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition, excetra will act as an integral member of the Unit. Shelves made of 22 standard wire gauge thick prime quality cold rolled close annealed sheet having 10 folds each will provided each designed to carry a unifirmly distrubuted load of 70 Vertical panel consists of the front, Centre and rear panel shall be made of 20 standard wire gauge thick cold rolled close annealed prime quality mild steel sheet and designed to take the load of shelves. Drive cover panel made out of 22 standard wire gauge thick cold rolled close annealed prime quality steel sheet to cover the entire drive mechanism. The Centre partition will comprise of a full cold rolled close annealed prime quality mild steel standard wire gauge Sheet. Locking system will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor and does not allow access to the units. Driving mechanism will provided externally supported on special grade anti-friction bearing to have smooth and effortless movement. Entire mechanism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 milimetre X 200 milimetre X 60 milimetre. Fully powder coated three pronged drive wheel for better torque and free movement of the rack over the guide rail. For indexing arrangement, acrylic card holders provided on the front panel for easy identification and retrieval. Final finish will be powder coating (8 tanks process with 70 microns). 11 Providing & fixing of 100% natural material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Heradesign planks of 600 mm X 1200 mm X 25 mm thickness made out of wood wool fibre of width 1 mm fiber thickness mixed with natural water & Magnesite (No Cement) with open & smooth surface texture, Weight of panel to be 11.3 kg/sqm. A Completly harmless envirenment & human friendly & also a disposable or recyclable material & can last for more than 80 years in building interiors, As it has long lifespan & suitable for indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achive upto NRC = 1.00 it should be a clear gap of 200 mm from wall slab along with the backing of mineral wool of 50 mm thick with 64 kg/cum density. Ecologically sound material with high mechanical strength with crash test of 90 km/hr with Ball Impact Test DIN 18032 & EN 13964 with flying colors & a sustainable material (PEFC & FSC Certified) along with EPD Certified according to EN ISO 14025 (AUB-Envirenmental Product declaration). Manufacturing tolerance for nominal size: length, width & thickness ± 1 mm, & in a standard climate of 23° C and 50% relative humidity. Fixing & Substructure: Impact resitant according to DIN-18023 or EN-13964 to be fixed on CD sections profile framework with screw 9 piece per panel & centre distance support of 300 mm & centre distance of cross profile would be at 600 mm & main profile at 900 mm CD profile is made out of G.I. (Sections Profile 60/27/0.6 mm -0.6 mm thick X 60 mm width X 0.27 mm height). The main profile is in the length of 3000 mm & to form a section of 600 mm X 1200 mm. The main profile is in the length of 3000 mm & to form a section of 600 mm X 1200 mm. The CD profile is to be suspended from soffit with the help of nonius hanger at a center distance of 900 mm. UD Profile 28/27/0.6 mm to be fixed on wall at the perimeter of the wall. If the main CD profile needs to extended, it needs to be connected with CD profile connector 60/27. The CD profiles to be connected to each other at the intersection by CD cross connector. Heradesign superfine panels to be fixed on the wall with a minimum of 200 mm void or gap with galvanized iron screws of length 50 mm & dia 4.5 mm with a backing of mineral wool of density 64 kg/cum density (50 mm thick). Colour Of panels : Natural Beige, can be painted to the desired colour (Any- RAL, NCS or StoColor Shades) using water based color by spray method prior to installation. Fire Class as per EN 13501- 1:B –s1, d0. Test Certificates to be submitted. 12 Providing and fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles With Armstrong or equivalent 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99 percent, NRC 0.7, Light Reflectance .85 percent, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 X 600 X 20mm , suitable for Green Building application, with Recycled content of 32 percent. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 milimetre with 15 milimetre wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 milimetre and 600 milimetre Cross Tees with a web height of 32 milimetre and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or equivalent make. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476, excetra complete. 13 Providing and fixing in position Gypsum board false ceiling with 12.5 milimetre thick Gypsum boards, screwed / fixed to the under structure of suspended galvanised iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 X 50 milimetre maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra all complete. (For Ground Floor) 1 2 14 Providing and fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15 milimetre Exposed GRID. The tiles should have Humidity Resistance (RH) of 99 percent, Light Reflectance 90 percent, Thermal Conductivity k 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 and 7), in module size of 600x600 X 16mm with Anti Microbial coating on the face of the tile, suitable for Green Building application, with Recycled content of 34 percent. The tile shall be laid on precoated galvanised iron channel on XL2 Clip having a web height of 32 milimetre 32 with 15 milimetre wide T section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200 milimetre Cross Tees with a web height of 32 milimetre and a load carrying capacity of 7.7 Kgs/M2 and pull out strength of 100Kgs. . The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or equivalent make. The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476, excetra complete. 15 Providing and fixing rollar blinds of approved make and shade of 38 milimetre round aluminium channel with blackout fabric and telting with chain (ball) system with all necessary fixtures and fitting, excetra complete. 16 Providing and Fixing Rajmudra made up of bronze i.e. 85% Copper, 5% Zinc, 5% lead, 5% Tin etc complete. (With all leads and Lifts) Size - 900 millimeter x 900 millimeter Appr. Weight 50-55 kilogram, Thickness 6-8 millimeter (Before execution sample should be got approved from Engineer in charge) 17 Providing and arrangemnt of high back chair, synchronized mechanism with multiple locking, adjustable armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with leatherite upholstery. 18 Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery. 19 Providing and arrangemnt of mid back chair, ECO CTS mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with fabric upholstery.1 2 20 Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 21 Providing Dining Chairs in Ante room of Officers Chamber of size 0.43 x 0.48 x 0.89 of rubber wood / Fibre with cushioned seat & back & French and Melamine polish complete as per instructions of Engineer in Charge. 22 Supply, fixing and installation of four milimetre thick aluminium composite panel of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The aluminium composite panel should be made out of thermoplastic core of low-density polyethylene LDPE (100 percent virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 milimetre thick, total thickness of aluminium composite panels not to be less than four milimetre, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70 percent kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 milimetre X 25 milimetre X 3 milimetre thick aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 milimetre X 1200 milimetre and fixed to the building structure as per design through 50 milimetre X 50 milimetre X 5 milimetre mild steel angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)1 2 23 Providing and fixing fully glazed structural glazing with aluminium sections anodised/powder coated (Colour as per specification) 2.5 x 1.5 extrusion sections for structural glazing weight about 2.0 to 2.2 Kg per 12 Feet with 6 mm clear transparent glass/one way reflective glass of saint goblin or asal make (Colour as per specification) is sticked on section with sticking glass on section with the help of 6 x6 mm Spacer tape of laim make or norton and silicon sealent 995, 795 and 789. do corning will be used the aluminum sectins will be secured to the masonry finish with mild steel or aluminum brackets which will be powder coated with anchor fasteners in crome finish and other necessary hardware accessories in SS handle will be provided for openable window including scaffolding charges. (before execution sample should be got approved from engineer incharge 24 Providing and fixing 45 centimetre wide mild steel ladder of 40 milimetre X 6 milimetre mild steel flat stringers and steps of 18 milimetre diameter mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre X 30 centimetre X 30 centimetre and painting the ladder with anticorossive paint complete. (For Ground Floor)Signature of Contractor No. of Corrections Executive 25 Providing and fixing mild steel grill door 24 kilogram per square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and three coats of oil painting, excetra complete. (For Ground Floor) 26 Providing and fixing country cut teak wood double or single leaf second class fully panelled door shutter with 35 milimetre thick and style and rail 25 milimetre thick pannels with openable fan light as per detailed drawings, excluding the door frame 60 milimetre X 100 milimetre including stainless steel fixrtures and fastening and finishing the wood work with oil painting three coats, excetra complete.(Excluding the door frame) (For Ground Floor) 27 Providing and fixing frame with / without ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 milimetre X 40 milimetre X 5 milimetre with oil painting, excetra complete. (For Ground Floor) 28 Providing and fixing acrylic plastic sheet panels of approved quality in 3.00 milimetre thickness, plain clear or any colour or obscured linings in lieu of glass pans to doors / windows including providing and fixing clips, putty, excetra complete. (For Ground Floor) 29 Providing and Fixing Toughned Glass 12 mm thick etc complete 30 Providing and fixing Glass Fiber Reinforced Concrete (GRC) for Column. GRC is composite material of cement fine agreegate alkali resistant glass fiber & admixture etc having thickness 25 mm for Coverning existing C Channels support on site. As per architectural design & approved Drawing etc. including finishing loading unloading labour etc and all taxes excluding GST 31 Providing Toughned Glass 8 mm thick 32 Providing and fixing in position, carpet more than 800+ grams per square metre, made with 100 percent stain proof fibres of approved make along with 5 milimetre underlay as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. 1 2 33 Providing and fixing Indian teak wood eaves boards 15 centimetre wide and 25 milimetre thick plain decorative type including scaffolding and painting with two coats, excetra complete. (For First Floor) 34 Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. 35 Density, Moisture Content for Wood
