|
| 1 | Component of Works |
| 2 | Clearing compound premises of shurbs, plants, jungles etc.by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). |
| 3 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 4 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer\"s specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment] |
| 5 | Single layer brick flat soiling of picked jhama bricks including ramming and dressing bed to proper level and filling joint with local sand. |
| 6 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. i) Pakur variety(Rate depend upon Site) |
| 7 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. i) Pakur variety(Rate depend upon Site) |
| 8 | Roof treatment 50 mm th. with ordinary cement concrete (mix 1:1.5:3) with graded stone chips (12mm nominal size) excluding shuttering and reinforcement if any over ground floor roof for protection of R.C.C. roof slab from weather as per relevant IS codes. i) Pakur variety(Rate depend upon Site) |
| 9 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer\"s specification |
| 10 | Hire and labour charges for shuttering with centering and necessary staging up to 4m using approved stout props and thick hard wood planks of approved thickness and required bracing for concrete slabs beams column lintel curved or straight including fitting fixing and striking out after completion of works ( up to roof of ground floor ). a) 25mmto 30mm thick wooden shuttering as per decision & direction of Engineer – In --Charge. |
| 11 | 1st class Brick work with brick work in cement mortar (1:4) in foundation and plinth as per direction of EIC. |
| 12 | Brick work with 1st class brick work in cement mortar (1:6) in super structure parapet etc. complete in ground floor. |
| 13 | 125mm thick brik work with 1st class brick in cement mortar (1:4) in ground floor. |
| 14 | dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 15 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc. including supply of rods initial straightening and removal of loose rust ( if necessary ) cutting of requisite length ,hooking and bending to correct shape placing in proper position and binding with 16 gauge black anneal wire at every intersection complete as per drawing and direction.(SAIL/TATA/RINL) . a) For works in foundation basement and up to roof of ground floor / up to 4 meter.i) Tor steel/Mild steel. |
| 16 | Plaster ( to wall, floor , ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating nosing and drip course where necessary (ground floor). a) With 1:6 Cement mortar ( 20mm thick ) |
| 17 | b) With 1:4 cement mortar ( 10mm thick ) |
| 18 | c) With 1:6 cement sandplaster (15mm th) |
| 19 | Artificial stone in floor , dado, staircase etc. with cement concrete (1:2:4) with stone chips laid in panel as director with topping made with ordinary or white cement ( as necessary )and marble dust in proportion (1:2) including smooth finishing and rounding of corners and including application of cement slurry before flooring works , using cement @1.75 Kg/Sqm. All complete includingmaterials and labour. For ground floor(i) 25mm thick with 3 mm thick topping. |
| 20 | M.S. gate, door/window of jail type as per approved design made of M.S. frame work intermediate stiffeners and round/square bars or angles, M.S. sheet (not less than 14 guage), cleast etc. including necessary riveting, bolting, welding, locking and hanging arrangement, fitting & fixing complete as per direction of EIC (in ground floor). |
| 21 | M.S or W.I ornamental grill or approved design joint continuously welded with M.S , W.I flat and bars for windows, railing etc, fitted and fixed with necessary screws and lugs in ground floor.I) grill weighting above 10 kg/ Sqm and up to 16 kg/ Sqm |
| 22 | Priming one coat on steel or other metal surface with synthetic oil bonded primer of approved quality including smoothening surface by sand papering etc. |
| 23 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface of necessary. a. On steel or other metal surface with other than (hi-gloss) two coats with any shade except white. |
| 24 | Acrylic distemper to interior wall,ceiling with a coat of solvent based interior grade acrylic primer( as per manufacturers specification ) including cleaning and smoothening of surface. a) Two coats |
| 25 | ApplyingExteriorgradeAcrylicprimerof approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finishacrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. |
| 26 | ProtectiveandDecorativeAcrylicexterior,emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(Two coats).( Normal Acrilic Emulsion) |
| 27 | Neat cement punning about 1.5mm thick in wall dado window sills floor drain etc. |
| 28 | Supply fitting & fixing of PVC pipes and fittings (medium duty) conforming to ASTM 1785 & threaded to match with GI Pipes as per IS 1239 (Part-I) (above ground) with all necessery accessories specials viz socket, bend, tee union cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc fitted with holder bab clamps, including cutting pipes making threads, fitting, fixing etc complete in all respect including cost of all necessary fittings as requiered, jointing materials and two coats of painting with approved paint in any position above ground. (a) For Exposed Work, PVC Pipes (Dia)a) 25 mm dia. |
| 29 | b) 20 mm dia |
| 30 | Supplying PVC water storage tank of approved quality with closed top with lid (Black Multi layer) a) 500 lit capacity |
| 31 | Labour for hosting Plastic water storage tankupto 1500 lit capacity a) Upto 1st floor from G.L |
| 32 | Labour for punching hole inplastic water storage tank upto 50 mm dia |
| 33 | Supplying fitting and fixing polythene Bib Cock/Stop Cock (HD) with metal inlet (EMCO/ATLAS) or equivalant) a) 15 mm dia |
| 34 | Add GST (SGST + CGST) @ 18% on basic price of Schedule of Work from Sl. No. 1.01 to 29 |
| 35 | Add @ 1% Labour Welfare Cess on basic price of Schedule of Work including GST from Sl. No. 1.01 to 30 |
