Tender For Petty Repair Against Day To Day Complaints In Pocket 3 And 4 Under Ge Roorkee; 1 Carrying out maintenance of plumbing complaints by engaging suitable plumber (skilled) and one helper with T&P for general day to day all plumbing complaints (from 0900 hours to 1700 hours), for day to day repairs to WHB & WC with connections and fittings like as leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer, repair to float valves, repairs to internal assembly low level cistern by adjustments, etc, repairs to internal leakage and brokage of GI and PVC pipelines as required at site to cater the satisfaction of user as assigned, with and including all minor spare parts, material & labour complete all as specified and directed.Note:- (a) Rate inclusive of complaints upto 4th floor of the building and removing rubbish upto a distance of 250 m outside the periphery of the area. (b)In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause. (c)In case of urgent complaint shall be rectifiedwithin three hours from the time of intimation. (d)The rates quotedshall be deemed for attending day to day complaint and make functional the entire complaints on a daily basis at area of AGE B/R-I.Note :- Contractor has to attended daily complaint for particular day otherwise penality for Rs 250/- per day will be leived on contractor. 2 Carrying out maintenance of Carpenter complaints under area of AGE B/R-I by engaging suitable carpenter (skilled) and helperwith T & P for general day to day carpenter complaints (from 0900 hours to 1700 hours), such as door/window easing, refixing of old aluminium mongery, hinges, tower bolt, handles, curtain rod, wiremesh etc in situ with and including all minor spare parts, material & labour complete all as specified and directed.Note:- (a) Rate inclusive of complaints upto 4th th floor of the building and removing rubbish upto a distance of 250 mtrs outside the periphery of the area. (b) In case of failure to deploy man power for any reason whatsoever may be, necessary penalty will be levied as specified in respective PS Clause.(c)In case of urgent complaint shall be rectifiedwithin three hours from the time of intimation.(d)The rates quotedshall be deemed for attending day to day complaint and make functional the entire Carpenter complaints on a daily basis at AGE B/R -I .Note :- Contractor has to attended daily complaint for particular day otherwise penality for Rs 250/- per day will be leived on contractor. (e)The rate including all type of nails, screws, nuts boltsetc small items required for day to day complaint. 3 Supply only 15 mm galvanised steel tube medium grade 4 Supply only 20 mm galvanised steel tube medium grade 5 Supply only indian rubber washers for pillar taps etc 6 Supply only flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern 7 Supply only 15mm Brass Tap Spindle, not less then 40gm 8 Supply only Teflon Tape White Thread Seal Tape 12 Mm*10 M*0.075 Mm 9 Supply only PVC flush syphon for 10 ltr low level flush cistern 10 Supply onlyPlastic Toilet Flush Tank Lever Handle (Parry Type, White) 11 Supply only GI elbow 15mm dia 12 Supply only GI elbow 20mm dia 13 Supply only GI elbow 25mm dia 14 Supply only GI T 15 mm dia 15 Supply only GI T 20mm dia 16 Supply only GI T 25mm dia 17 Supply only GI socket 15mm dia 18 Supply only GI socket 20mm dia 19 Supply only GI socket 25mm dia 20 Supply only Reducing GI Reducer Socket, For Pipe Fitting, 20x15 mm ( 3/4 X 1/2 inch) 21 Supply only Reducing GI Reducer Socket, For Pipe Fitting,25X20MM, 22 Supply only GI nipple of 15mm dia 23 Supply only GI nipple of 20mm dia 24 Supply only union 15mm dia 25 Supply only union 20mm dia 26 Supply only GI plug 15mm dia 27 Supply only GI plug 20mm dia 28 White cement 29 Supply only MS but hinges of size 100mm 30 Supply only MS but hinges of size 75mm 31 Supply only aluminium tower bolt of size 100mm 32 Supply only aluminium tower bolt of size 150mm 33 Supply only aluminium tower bolt of size 200mm 34 Supply only aluminium handle 200mm D type 35 Supply only aluminium handle 150mm D type 36 Supply only glass putty Note :- Item Nos 03 to 36 to be handover to store and credit USRobtain and submitted during payments of RAR. 37 S & F in repairs of 15 mm bore size PVC, PTMT bib tap complete all as specified and directed. 38 S&F in repairs of 15 mm bore size PVC, Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms)complete all as specified and directed. 39 S&F in repairs of 15 mm bore size PVC, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)complete all as specified and directed. 40 S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. 41 S&F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm borefancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. 42 S&F in repairs 15 mm dia brass Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down highpressure, with or without lettered Hot or Cold with long screwedshanks and fly-nuts, screwed for ironpipe and fixed all as specified and directed 43 Supply& fixing in repairs 2nd class hard wood plain fillets square or rectangular or tri angular in section clean sawn planed on both sides secured with nails or beads in section exc 13sqcm and n-exc 25 sqcm including two coats of synthetic enamel paint over a coat of primer. 44 S & F in repairsbrass CP mixer (arial single lever basin mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed 45 S&F in repairs brass CP mixer (Sink mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. 46 S&F in repairs ball valve of PTMT with Polyethene float for 20 mm bore pipe complete all as specified and directed. 47 S&F in repairs ball valve of PTMT with Polyethene float for 15mm bore pipecomplete all as specified and directed. 48 S&F in repairs stop/angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. 49 S&F in repairs chromiumplated brass stop cock fancy type (Concealed Stop Cock incl exposed Part of Concealed Stop Cock) screwed both ends high pressure for 15 mm bore size iron pipe or ferrule complete all as specified and directed. 50 S&F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed 51 S&F Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube andABS wall hook including makingconnections and fixed in position complete all as specified and directed 52 S & F wall Mixer with 115 mm bend pipe complete all as specified and directed 53 S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. 54 S & F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern incl jointing to WC complete all as specified and directed. 55 S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets forbottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed 56 S & F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. 57 S & F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl P or S trap and making good the disturbed surface to match with the existing complete all as specified and as directed. 58 S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe, anti-syphonage pipe etc incl making good to floorfixed in repair size 580x440mm white with intergral footrest with P or S trap complete (excludingflushing cistern and flush)complete all as specified and directed. 59 S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed. 60 S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. 61 M&L in repair GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. 62 M & L in repair GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. 63 Hacking out old broken glass (any thickness, size, qualityor description) from wooden/metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins/spring clips complete all as specified and directed 64 S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. 65 S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. 66 S & F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/ windows complete all as specified and directed. 67 S&F in repairs towel rail 600 mm long 20 mm dia brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed. 68 S&F 250 mm MS sliding door bolts, plate type, stove enamelled black with bright boltnot less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed. 69 S&F mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhats at any floor up to four storied bldgs and making it functional complete all as specified and directed. 70 S&F Mild steel barel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts ,fixed in repair complete all as specified and directed. 71 S&F MS pressed handles oval type stove enamelled black, 150 mm size as in repair complete all as specified and directed. 72 Runing welding in repairs thickness of metal to be welded n, exc 2.5Cm Exc. 6mm but Exc. 6mm but n exc 9mm complete all as specified and directed. 73 S&F in repairs 125 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 74 S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with of flap 30mm complete all as specified and directed. 75 S&F in repairs looking mirror 600x450x5mm thick with aluminium channel frame, selected quality mounted on 6 mm thick commercial ply wood back and fixed with chromium plated brass screwes and cup washers complete all as specified and directed. 76 S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed. 77 S&F in repairs Door closer hydraulically regulated,Aluminium (Die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete al as specified and directed. 78 S&F in repairs mild steel ordinary door spring closer (Helical door spring) incl roller and roller plate incl fixing to steel frame or to wooden frame complete all as specified and directed. 79 S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. 80 S&F in repairs HDPE PVC lid (cover) up to 1000Ltrs capacityPVC tank complete all as specified and directed. 81 Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed . 82 Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed . 83 Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n,exc 1.5 Sqm each complete all as specified and directed . 84 S&F 2nd class hard wood plain solid, straight chowkhat and frame rebated on the solid rounded or chamfered put together with glue pinned at point complete all as specified and directed . 85 S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete all as specified and directed. 86 S&F 35 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded with sash bars open rebated and prepared to receive glass/gauge etc with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed . 87 M&L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 88 S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed . 89 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubesfor top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. 90 S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. 91 S&F PTMT butt hinges 100mm complete all as specified and directed. 92 S&F PTMT Tower Bolt 200mm complete all as specified and directed. 93 S&F PTMT door handles 125mm complete all as specified and directed. 94 S&F vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) polished, light shade, area of each tilesnot exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. 95 S&F vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/skirting etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed. 96 M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed. 97 M&L Non-skid Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry andpointed in white or coloured cement to match complete all as specified and directed. 98 M & L Non-skid Ceramic colouredjoint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 99 Dismantling timber scantlings 40 sq. cm and over framed work in section, in any position complete all as specified and directed 100 M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed 101 Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed 102 M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet0.50mm thick of an colour having tensile strength of 550 Mpa AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed 103 M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed 104 S & F in repairs for aluminium hat pegs soilid body 125 mm to 175 mm complete all as specified and directed. 105 Taking down alluminiumdoor/ window complete shutterwith/ without frame as per requirement and repair to butt hinges/ any type of hinges screw (incl S&F hinges/any type hinges/ screw/ rubber biding if required) and fixed to frame/wall complete all as specified and directed 106 Easing of wooden window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc complete all as specified and directed. 107 Easing of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc complete all as specified and directed. 108 Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including of handles/ hinges if required) or changing the position of hinges, complete all as specified and directed. 109 S & F in repairs 32 mm bore and 750 cm long PVC waste pipe for WHB complete all as specified and directed. 110 S & F in repairsGrating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. 111 S&F in repairs, mild steel chromium plated grating (round) 125 mm dia fixed in cement mortor (1:3) over floor / nahani trap (with hole and without hole) complete all as specified and directed. 112 S & F of 25 mm dia stainless steel fancy type curtain rod with and including mild steel matching to coloure fancy type brackets, stops, in suitable size and necessary rings, side caps etc. complete all as specified and directed. 113 S&F rubber door cill 40/50mm as required in door cill complete with required nails etc complete all as specified and directed. 114 S&Fdoor seal brush with aluminium holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed. 115 S&F in repairs, PVC cabinate looking mirror 300x450mm complete all as specified and directed. 116 S&F in repairs Floor door stopper of aluminiumalloy body and tongue, anodised, with hard drawn steel spring having overall length of cover plate 150mm, fixed in floor all as specified and as directed. 117 S&F in repairs CP toilet paper holder complete all as specified and directed. 118 M&L for fixing of magnet suitable for cupboard shutters, shelfs etc complete all as specified and directed. 119 S&F in Repairs SS foldable towel shelf 450mm long with lower hangersfixed to wall ss screws etc, complete all as specified and directed. 120 S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 121 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 122 S&F in repairs, stainless steel plate rack of overall size 24” X 30” X 10”, made out of 1 mm thick stainless steel sheet and fixed in postion complete al as specified and directed. 123 S&F in repairs for factory made Pre-laminated/plain/PVC shutter of 9mm (+-0.7) thickness consisting of panel of 9 mm (+-0.7) thick celuka ply of density 600 Kg/Cbm manufactured by an ISO-9000 certified company using for back side shutter celuka ply 9 mm (+-0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory etc complete asdirectionof GE, manufacturers specification and drawing complete all as specified and directed. 124 S&F in repairs for factory made Pre laminated/plain/PVC shutter of 18 mm (+-0.7) thickness consisting of panel of 18 mm (+-0.7) thick celuka ply of density 600 Kg/Cbm manufactured by an ISO-9000 certified company using for shutter celuka ply 18 mm (+-0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory at all four edges of shutter using 13/6 size self tapping steel. The thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc. including stainless steel handle, tower bolt, magnet etc complete as direction of GE, manufacturers specification and drawing complete all as specified and directed. 125 S&F in repair stainless steel bascket cutlurry size-15x20x4 (width may be vary as per site contion from 15 to 21) incl powder coated drawer runner/channel and soft close as required complete all as specified as per manufaturer instruction (PVC shutter/board paid seperately). 126 S&F in repair stainless steel bascket plain size-15x20x6 (width may be vary as per site contion from 15 to 21) incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. 127 S&F in repair stainless steel bascket for thali size-15x20x8 (width may be vary as per site contion from 15 to 21) incl powder coated drawer runner/channel as required complete all as specified as per manufaturer instruction. 128 S&F in repair stainless steel bascket for plate size-15x20x6(width may be vary as per site contion from 15 to 21) incl powder coated drawer runner/ channel as required complete all as specified as per manufaturer instruction. 129 Demolition of Brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . 130 M & L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed. 131 M & L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan anyradius in half brick complete all as specified and directed . 132 Demolition of RCC of any description and in any position complete all as specified and directed. 133 M&L for precast cement concrete type B-1 (1:2:4) in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed. 134 M&L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. 135 S&F granite (of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 136 S & F in repairs PVC (SWR) bends / elbow 110 mm complete all as specified and directed. 137 S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including taking down complete all as specified and directed. 138 S & F in repairs PVC (SWR) bends / elbow 75 mm complete all as specified and directed. 139 S & F in repairs PVC (SWR) T 110 mm complete all as specified and directed. 140 S & F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including taking down complete all as specified and directed. 141 Disconnecting existing water tanks exc 250 lts n.exc 500 ltrs capacity, setting aside (or lowering if required) for repair,cleaning etc and hoisting if required reconnecting and refixing in position (cleaning, repairing etc measured separately) complete all as specified and directed. 142 Disconnecting existing water tanks exc 500 lts n.exc 1000 ltrs capacity, setting aside (or lowering if required ) for repair, cleaning etc and hoisting if required reconnecting and refixing in position (cleaning, repairing etc measured separately) complete all as specified and directed. 143 Cleaning and removing all scale and dirt, etc, from water storage tanks 500 Ltr capacity existing tanks and from mouths of circulating pipes, etc complete all as specified and directed. 144 Cleaning and removing all scale and dirt, etc, from water storage tanks 1000 Ltr capacity existing tanks and from mouths of circulating pipes, etc complete all as specified and directed. 145 Dismantling and S&F in repairs, 500 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position including GI tank nipple of 20mm/15mm dia bore and suitable ball valve as required complete all as specified and directed. 146 S&F in repairs, 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position including GI tank nipple of 20mm/15mm dia bore and suitable ball valve as required complete all as specified and directed. 147 Demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed. 148 M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays nexc 2.50 Sqmand joints filled with mastic fillingcomplete all as specified and directed. 149 M&L 40mm thick PCC type B1, 1:2:4(20mm graded stone aggregates) as ion floor finish surface even and smooth using extra cement complete all as specified and directed. 150 Taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc. 151 M&L for providing 15 mm thick rendering with cement mortar 1:6 finished even and smooth (without using extracement) complete all as specified and directed. 152 M&L for providing 15 mm thick rendering with cement mortar 1:4 finished even and smooth (without using extracement) complete all as specified and directed. 153 M&L for providing rendering 10 mm thick in CM (1:3) as in ceiling concrete surface finish even and smooth of any description etc complete all as specified and directed. 154 M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed. 155 M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. 156 M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. 157 S&F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. 158 S&F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. 159 S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed. 160 M&L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. 161 M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 162 M&L powder coated aluminium door shutters, aluminium section of following size top rail, 100mmx44mm middle rail 150mmx44mm and bottom rail of size 150mmx25mm, including 01 no mortice lock, necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door,hinges if required, anodised aluminum snap beading screws etc required complete all as specified and directed. 163 S&F sheet glass 5 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed. 164 S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. 165 M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choicelamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. 166 S&F in repair Stainless steel sink, 1.00mm thick for kitchen orlaboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. 167 Taking down wall/ceiling boards Asbestos plywood of any thickness including cover fillets complete all as specified and directed. 168 M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC. 169 Providing & fixing false ceiling atall heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of ted perforated 12mm Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm (having filled with black silicaon), suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. 170 Providing and fixing Prelam PVC SHEET WALL PANELLING and equivalent of thickness 5 mm (+0.25) consisting of panels of desired size stuck on inner frame work of 50 mm wide strips of 5 mm (+0.25) thick prelam PVC sheet. The panel & strips shall be 600 kg/cbm Density Manfactured by an ISO-9000 certified company. The strips shouldhave in their centre a grove of 6mm width and 1 mm depth for sinking the head of the scew used to fix the strips to the wall vertically at an equal interval of 10 between two PVC strips, The PVC strips shall be fixed to the wall using 65 mm long M.S screws through groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5 mm (+ 0.25) thick prelam PVC sheet of width 75mm feathered at the edges shall be struck at the places where two panels are joined, using solvent cement complete all as specified and directed. 171 S&F in repairs 32mm bore dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60gms) complete all as specified and directed. 172 S&F in repairs Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
