Tender For Special Repair Of Bathroom At Or (Otm) Bldg No P-10 Of 6 Mdsr Under Ge (East) Bareilly; 1 Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 2 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises 3 Dismantling of stone slabs and tiles of any description or thickness in floors ,aprons laid,bedded and jointed in any mortar etc complete all as specified and directed. 4 Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed. 5 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 6 Demolition ofunreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. 7 Excavating in trenches n. exc. 1.5 m wide, and n.exc. 1.5 m in depth for foundation etc. n.exc. 10 sqm on plan and n. exc. 1.5 mtr in depth and getting out soft/ loose soil complete all as specified and directed. 8 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 9 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. 10 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 11 Taking up or down15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 12 Taking up or down20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 13 Dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and directed. 14 M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed . 15 M&L for 25 mm thick PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in floors to receive surface of tiles complete all as specified and directed. 16 M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 17 M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. 18 M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. 19 M&L for 9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border of size 300x600mm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. 20 M&L for 18-20 mm thickGraniteof black colour (table rubbed and polished) inwin dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. 21 M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate ) ( nominal mix ) as in slabs supported on wall ,landing, balconies ,shelves and like including bonding agent complete all as specified and directed. 22 M&L for form work to chajja, slab ,weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat complete all as specified and directed. 23 M&L for form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. 24 S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia complete all as specified and directed. 25 M&L for PCC 1:5:10 type E-2 (40 mm graded stone aggregate) as sunken base of floor fillings complete all as specified and directed. 26 S&F 32 mm dia GI pipe, medium grade as in spout pipe in suken floor complete all as specified and directed. 27 M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. 28 M&L for rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. 29 M&L for 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick masonaryfinishedeven and smooth without using extra cement with using water proofing liquid @ 0.15 Ltr per 50 Kg bag of cement complete all as specified and directed. 30 M&L for rendering 10 mm thick in CM 1:4as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. 31 M&L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm ofmembrane with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant chemicals as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primerat the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instructionsincluding preparation of surface by removing the existing treatment, complete all as specified an as directedNote :-(i) Polymeric membrane shall belaid in sunken floor and on sides up to finished floor level.(ii)The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Supply only water proofing liquid shall be measured and paid seperately 32 Supply only Integral water proofing Liquid complete all as specified and directed. 33 S&F pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs ,hinges,lock strike plate ,etc complete all as specified and directed. 34 S&F 30 mm Plain,framed,panelled shutters(any number of panels) 2nd class HW with panels of timber flat on both sides (feather edged),or of veenered particle board medium density ,wood particle board with comercial face veeners complete all as specified and directed. 35 S & F 150 mm long Floor door stopper ofaluminium alloy body and tongue with hard drawn steel spring. fixed in floor complete all as specified and directed. 36 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. 37 S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 38 S&F steel windows with pressed steel frame (size 95x45x1.25 mm) side hung shutter including box type hinges with steel handle ,and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauzed openable shutter without glazed bar (open in side) dovetailed or welded complete all as spd and directed and all as per drg no TD/088 dt 07 Jun 2002 Note:-(i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) Rate for filling of PCC in frame deemed to be included in quoted rate (iii) MS grill shall be measured and paid seprately under relevant item of schedule 39 S&F steel ventilators fixed type ,with glazing bars complete welded including one shop coat of Red oxide Zinc chromate primer complete all as specified and directed. 40 M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed. 41 S&F galvanised steel wire cloth ,0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with galvanised steel wire staples complete all as specified and directed. 42 S&F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 43 S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 44 S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. 45 S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed. 46 S&F 300 mm long aluminiumsliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed 47 S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in positioncomplete all as specified and directed. 48 S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 49 S&F15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. 50 S&F 20 mm dia steel water tubing, galvanized, medium grade concealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 51 S&F in repair 15 mm dia bore brass chromium plated wall mixer 3 in 1, for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. 52 S&F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed. 53 S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified and directed. 54 S&F in repair fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. 55 S&F in repair stainless steel of grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified and directed. 56 S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. 57 S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 58 S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipecomplete all as specified and directed. 59 S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified and directed. 60 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 61 S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed. 62 S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe)water closet squatt pattern complete including provn of lime concrete bedding complete all as specified and directed. 63 S&F in repair vitreous China coloured European type WC with P or S trap 75 mm dia white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. 64 S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. 65 S&F Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified and directed. 66 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. 67 S&F in repair vitreous China bowl urinal flat backsize430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed. 68 S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 100 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed. 69 S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fitting complete all as specified and directed. 70 S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with neceassary fittingcomplete all as specified and directed. 71 S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. 72 S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. 73 S&F PVC (SWR) 75 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 74 S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access doorcomplete all as specified and directed. 75 S&F designed looking mirror of any size of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified 76 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in Stone concrete block or slab walls complete all as specified and as directed. 77 M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. 78 M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etcby skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over two coat of wall care putty of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised dealer. 79 M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coat of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machinecomplete all as spd and directed .Noe:- Application to be done through authorized applicator 80 M&L for preparation of newly plastered surface of walls and applying two coats of Dust Resistant and Anti Algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed 81 M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 82 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all as specified and directed. 83 M&L for concealed point wiring for one light or one fan point controlled by one swtich complete with single core FRLSH PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through &including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed Modular metal flush box of suitable size flush within wall surface, suitable for fixing of Modular cover plate, switches / sockets etc, complete all as specified and directed for the following :-Note : 1. Modular white cover plate shall be measured and paid separately2. Rate quoted shall deemed to be inclusive of Metal flush box, cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. 84 All as per item No 83 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and directed. 85 All as per item No 83 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and directed. 86 All as per serial item No 83 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and directed. 87 S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as specified and directed. 88 S&F Modular Socket 6 A, 2/3 Pin 2 Module size complete all as specified and directed. 89 S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as specified and directed. 90 S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as specified and directed. 91 S&F Modular white cover plate with frame, 3 Module size complete all as specified and directed. 92 S&F Modular white cover plate with frame,4 Module size complete all as specified and directed. 93 S&F Modular white cover plate with frame, 6/8 Module size complete all as specified and directed. 94 S&F ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and directed. 95 S&FLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 96 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 97 S&F in replacement sheet metal enclosure double door shutter type for DBs 240 Volts single pole and neutral 8 ways rated bus bar complete all as specified and directed. 98 S&F in replacement SPN 40 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 99 S&F in replacement SP 5 to 32 amp rating 240V, 10KA B curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 100 Taking down submain wiring of any size complete all as specified and directed. 101 M&L for concealed sub main wiring with 2 runs of 6 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 25 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates.2. The two 2 runs of 6 Sqmm wire and one run of 6 Sqmm wire will be measured as one unit. 102 M&L for concealed sub main wiring with 2 runs of 4 Sqmm FRLSH, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLSH, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 25 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates.2. The two 2 runs of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit. 103 M&L for earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 5 of SSR 2009 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion complete all as specified and directed. 104 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 105 S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. 106 S&F in replacement AC functional boxMCB protected socket plastic base dimension 415 x 375 x 225 mm 4 module raise neutral link complete with one single pole MCB 20 Amp C series 240 volts complete all as specified and directed. 107 Teking down MCB Distribution board with MCCB/MCB of any size and capacity complete all as specified and directed. 108 Taking down old pipe from trenches of size 25/50 mm alongwith all fittings and valaves complete all as specified and directed. 109 Supply, laying, connecting and testing of ISI marked 50 mm bore dia of pipe GI water tubing medium grade including all fitting and fixed complete to walls or laid in floors complete all as specified and directed. 110 Supply, laying, connecting and testing of ISI marked 25 mm bore dia of pipe GI water tubing medium grade including all fitting and fixed complete to walls or laid in floors complete all as specified and directed. 111 S&F 25 mm bore dia of pipe, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 112 S&F 50 mm bore dia of pipe, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 113 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft and loose soil complete all as specified and directed. 114 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. 115 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
