Tender For Repair/Renovation Of Se Office- 1 supply of labour for clearing the space including stacking of servicible material and disposal of unservicible material as directed by engineer-in-charge. 2 skilled 3 unskilled 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. 7 Centering and shuttering including strutting, propping etc. and removal of form for: 8 Suspended floors, roofs, landings, balconies and access platforms. 9 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powdercoated 50 microns) 10 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) 11 Providing and fixing ACP Panels in aluminum door, window shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With ACP Sheets of 4.0 mm thickness 12 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 13 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels(Area of slab over 0.5 sqm) 14 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600 mm 15 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Size =600*450*250 16 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm 17 roviding and fixing kitchen pantry cabinet of size 2 feet x 2 feet (height x width), made with 19mm BWP grade plywood, laminated on both sides with 1mm thick decorative laminate (ISI marked), including internal shelving as required. All exposed edges to be finished with edge banding or PVC tape. Cabinet to be provided with soft-close hinges, standard SS handles, and necessary fixtures. All materials, labour, fittings, and finishing works complete. 18 Providing and fixing PVC B Type soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. 19 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B 20 Fittings (75mm) 21 Floor Trap 22 Collar 23 Bend 24 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 25 15 mm nominal dia 26 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge 27 N-16 pipe, 16mm OD(SDR-7.4) 28 Providing and installation of water Geyser 25 ltrsABS Body including including all sanitary fittings, angle valves, CP connections etc complete job.Makes:- Bajaj/Crompton/Jaquar/Hindware 29 Providing and carrying out wiring for light point/ fan point/exhaust fan point/ call bell point with 1,5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium classPVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (exol. cost of conduit 30 Supply , I/T/C of 1200 mm sweep Ceiling Fans complete in all respects. Confirming to relevant Indian Standards 31 Supply, I/T/C of 200mm nominal sweep Exhaust fan including shutter from outside complete confirming to relevant indian Standards 32 Providing and fixing of 16A heating point with 2×2.5 sq.mm + 1×1.5 sq.mm PVC insulated copper conductor wire in concealed PVC conduit, including modular type 16A switch with indicator and 3-pin socket outlet, mounted on MS box with modular cover plate, complete in all respects. 33 Providing and fixing curtains i/c Curtain rods and brackets complete of size 3ftx6ft 34 Providing and fixing of Honour Board made of high-quality acrylic sheet with a smooth black vinyl finish, mounted with polished brass letters for inscriptions of required minimum size of 3ftx4ft. Including all necessary accessories complete job. 35 Providing fixing,testing and commissioning of wall-mounted domestic water purifier unit (RP+UV+TDS Contriller),suitable for handling raw`water of high turbidity and biological contamination as prevalent in district shopian, having minimum water storage of 8 to 10 litres and purification capacity not less than 40 litres per day ,complete with all required accessories including sediment pre-filter, activated carbon filter, RO membran,UV Chamber, UF filter, mineral cartridge, auto shut-off valve, inlet feed pipe, ball valve, wall mounting stand, drainage line, and power connection, including all necessary fittings, clamps, screws, plugs, and minor civil worksrequired for fixing on wall and connecting to raw water supply and power source. the job includes initial testing,demonstration, and training to office staff, as well as submission of warranty card and operation manual.the work shall be completed in all repects to the satisfaction of the Engineer-in -charge.
