Mla Lad Fund Scheme. Construction And Providing Synthetic Acrylic Cushion Coating Of Badminton Court Under Jurisdiction Of R-I Division.

Sharing tender

Mla Lad Fund Scheme. Construction And Providing Synthetic Acrylic Cushion Coating Of Badminton Court Under Jurisdiction Of R-I Division.- 1 Earth work in surface excavation not exceeding 15 cm depth but exceeding 1.5 m in width as well as 10 sq m on plan including disposal of excavated earth lead up to50 m liftup to 1.5 m. Disposal soil to be leaved and neatly dressed . All kind of soil(Rate 64.92 X GST Factor 0.973= 63.16) 2 Earth work inexcavation by mechanical means ( Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.50metre in width or 10square metre on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50mAll kind of soil 2.8.1(DSR Rate 260.30 X GST Factor 0.973= 253.27) 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%)(DSR Rate 7654.85 X GST Factor 0.973= 7448.17) 4 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1;3 ( 1 cement ; 3 coarse sand ) including making joints with or wihtout grooves ( thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment). (Precast C.C Kerb stone shall be approved by Engineer-in-charge). (DSR Rate 10117.60 X GST Factor 0.973= 9844.42) 5 Providing and laying design mix cement concrete of M-10 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand Fly ash and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria,laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, by groove cutting machine,complete all as per direction of Engineer-in-charge Note:-Minimum cement content to be used this item is @ 150 kg/cum. Excess cement used as per design mix shall not be payable.(Rate 7600.79 X GST Factor 0.973= 7395.57) 6 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand Fly ash and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria,laying at site, spreading and compacting mechanically by using needle vibrators, levelling to required slope/ camber, finishing with required texture,complete all as per direction of Engineer-in-charge Note:-MinimumCement contentto be used this item is @ 340 kg/cum. Excess cement used as per design mix shall not be payble . Cement concrete prepared with batch mixing machine Fly ashconforminggradeof IS. 3812 (Part-1) only be used as Par replacement of OPC (Rate 8903.34 X GST Factor 0.973= 8662.95) 7 Disposalofbuildingrubbish/malba/similarunserviceable,dismantledorwastematerialsby mechanical means,includingloading,transporting,unloadingthesameatanyC&Dwastemanagementsitewithin25Kms.Leadi.e. ShastriPark/Burari/ Mundkaincludingweightingat plant etc. complete as per directionof Engineer-In-Charge. Weighting andunloadingatthe plantshallbeasperprocedures/rulesoftheC&DWasteplant. TheprocessingfeeofC&D managementatprescribedratswillbedepositedby theagencyandthesameshallbereimbursedby thedepartmenton production of only original cash receipts and as per direction and entire satisfaction of engineer-in-charge (Rate 520.22 X GST Factor 0.973= 506.17) 8 Providing and fixing 2 Nos stainless steel pipe (304 Grade) for post (Having 65mm dia thikness 2.11 mm and 2.90m in length with stainless steel hooks 3 nos. in each post with pipe cap, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same all complete. Also provide one standered / approved size badminton net of make COUGAR or LYGER with cleats which will be fixed with post as per given diamention and as per direction and satisfaction of Engineer -in -charge. 9 Providing and laying 8 layer synthetic acrylic cushion coating for badminton court with ITF classified material Refkim or equivalent , system consisting of :8 layers System Synthetic Acrylic for Synthetic Court:-· (1 Layer) Concrete Primer· (2 Layer) Acrylic Resurfacer· (3 Layer) Cushion· (2 Layer) Top Coat· White Line Marking All the above as per games standard by ITF. The product use must be clasified by ITF (International Tennis Federation) complete in all respect and as per the direction andentire satisfaction of Engineer‐in‐charge. 10 Supply and Instalation of sign board made with 3mm thick Mild steel (M.S. )rectangular plate1270 mm x 830 mm x 3mm thick M.S. Plate fittted below at rectangular plate over the 40 mm Squaretublar pipe 2200 mm long (weight not less then 3.43 kg/metre).Front side of both the plates shall be covered with high intesity encapsulated typeheat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination inculding subject matter message (Bi-lingual) symbol and border etc as per IRC code 67:2001 pasted on substrate by an adhesive backing which shall be activated by applying neat and pressure conforming to painted with two or more coats of synthetic enamel paint of required shade and approved brand and manufacture over priming coat of zinc chromate yellow primer. (Rate 6814.94 X GST Factor 0.973= 6630.94) 11 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (DSR Rate 194.40 X GST Factor 0.973= 189.15) 12 Providing and fixing Clear Transparent Acrylic Basketball Board of Size 1800mmx1050mm with Rim and net of approved make or ISI Marked for basketball backboard fixing with standing steel pole with nut bolt, Goal mounting holes shall be cut as per the standard size as per Direction and Entire satisfaction of Engineering -in-charge.