Tender For Furniture And Interior Work Of Union Bank Of India Kalyan Murbad Branch, kalyan-Maharashtra

Tender For Furniture And Interior Work Of Union Bank Of India Kalyan Murbad Branch => Limited; Essentials to be followed while quoting the rates for the furnishing works This project is very prestigious project and has to be Completed within the mentioned Time duration. The vendors quoting the rates will be required to provide the documentary evidence of their purchases of the mentioned/approved makes as mentioned in the Tender. The vendors will have to submit the PERT Chart as a Road Map for carrying out their works, thus they are ought to provide the schedule of works so that the works are completed within the given time. The Vendor will have to submit the weekly report of works in design & drawings related to their execution and Photographs of the same and the ongoing works in advance and get the desired approval from the Architect/consultant. The vendor is liable to get Every sample material used in the works, to be got approved by the Architect/consultant. Which does mean that the vendor is not committed to use the approved materials only. The rates quoted include providing of all the design/drawings material resulting in functional commodity in all respect and approved by the Banks competent Engineer/appointed Architect/Consultant. The verification/lab test of the material can be called any time for realizing the factual status of the used materials. The contractor will prepare every shop drawings/modals/mockup before the works and get it approved by the Architect/Consultant before starting the works. Similarly, the Vendor is required to submit every drawing of each works completed by him, along with the detail of the materials used. The costing of the commodities as under stated is based on the ISO standards & specifications of the material therefore the materials mainly used in Furnishing i.e Plyboard should be as Per ISO IS 303 Grade, SS Screws of 302 Grade, Marine adhesive, Standard & approved Laminates & hardwares. Note: The vendors before quoting the rates should visit the site because the dismantelling of the entire Furnishing works and its disposal is to be done at their end. The Buy back charges are to be quoted for the said works. The Bank will not pay any extra charges for demolition and disposal of the items, in the Branch/Premises. The disposal is to be done as Per the Governing BMC Act. The contractors quoting below 15% of the estimated cost will be required to submit Performance warranty equivalent to 10% of the estimated cost of works which will only be released after the issuance of successful completion letter of the Architect/Consultant. The cost of termite resistance and Viper paint to be done to induce Fire resistant & Termite properties in the wooden works, is to be included in the provided rates. All the transportation charges, mock up charges, lab test reports charges, cartage charges including provision of temporary electricity and water charges are the part of the works and are to be arranged by the vendor, Bank will pay against the finished commodity approved and certified by the appointed Architect. However GST Charges will be paid extra by the Bank. All the Approved design & modals of hardwares are to be of SS 304 Grade. The Nails and screws made up of SS Grade will only be permitted. The Marine grade adhesive and the Steam beech molding/beading along with melamine Polish of desired shade & finish are the other vital mandatory points included in the costing of the works. The mode of measurement are specefied in relevance to the works in the below mentioned details while the Standard mode of measurements will be adopted which also refers the measurement to be done in proximity of .01mtrs. The approved usage of the materials will only be permitted, the failure, if found will lead to the either mposition of the penalty or the restructuring of the commodity as per the given specification. This will be the sole prerogative of ARCHITECT/CONSULTANT FOR WHICH THE CONTRCTOR/VENDOR has no right by whatsoever means to seek the vention of court etc. as this will be treated as the infringement of the Articles of the Tender specifications regarding the usage of specefied and accepted material in the relevant tender works. All the wooden works at site will be required to be chemically treated with termite resistant chemcial such as Dusbain or equvialent. They will also be required to be painted by Viper Paint for inducing fire resistant prperty. INTERIOR FURNISHING WORKS IMPORTANT INGREDIENTS USED IN THIS WORK Ingredients of use in the specified Works: All the approved makes are to be used. The essential one are - All the wooden Ply Boards, Plywoods etc. used for interiors should be in in confirmation to the IS 303 and those used for the external purpose should be in confirmation to IS 710. 19 mm thick Block Board basic cost @ 85/ Sq.ft. 12 mm Ply, basic cost @65/Sq.ft., IS 303 Grade 6 mm Ply, basic cost @ 45/Sq.ft.Flexi Ply 6mm thick basic cost @ 80/Sq. ft approved laminate of approved color /shade basic Cost @ 55/Sq.ft. while the internal surfaces will be finished by using 0.8mm thick laminate made, basic cost @35/Sq. ft. Edge bending tape of matching color and shade. Half molded Granite/Italian or Corian basic cost @ 475/Sq.ft. Wiper Paint, approved Primer, Velvet Touch paint basic cost @ 45/Sq.ft., Royal Play Paint basic cost @ 85/Sq.ft. Velvet cloth basic rate @250/Sq.mtr. Marine grade grade adhesive in confirmation to IS Code, Imported Wall papers basic cost @ 65/Sq. ft. Hardwares of a reputed make of SS 304 Grade of approved Finish. Plain glass of approved make & shade as relevant IS Code of 6mm,10mm & 12mm -Toughened glass 8mm, 10mm & 12mm. Sections - Polyester Powder Coated (50 Microns, of required color & textureof approved make), Box section 50 x 50 mm, 50 x 25 mm & 2 1/2 x 1 1/2 Aluminum section), Glass door Aluminum section. All the Hardwares used in Aluminum works to be polyester powder coated in the desired shade & color as approved by the consultant. Teak wood sections of 50mm x 25 mm, Wooden Beadings & Moldings of Steam beach are used. Melamine Polish on the wooden item. Gypsum Board basic cost @ 450/Sq.ft. Grid tiles basic cost @ 65/Sq.ft. ..... more in document

INR 500 /-

INR 19.94 Lakhs /-